Lines Matching +full:fsl +full:- +full:i2c

1 // SPDX-License-Identifier: GPL-2.0-or-later
12 /dts-v1/;
17 #address-cells = <1>;
18 #size-cells = <1>;
19 interrupt-parent = <&mpc5200_pic>;
22 #address-cells = <1>;
23 #size-cells = <0>;
28 d-cache-line-size = <32>;
29 i-cache-line-size = <32>;
30 d-cache-size = <0x4000>; // L1, 16K
31 i-cache-size = <0x4000>; // L1, 16K
32 timebase-frequency = <0>; // from bootloader
33 bus-frequency = <0>; // from bootloader
34 clock-frequency = <0>; // from bootloader
44 #address-cells = <1>;
45 #size-cells = <1>;
46 compatible = "fsl,mpc5200-immr";
49 bus-frequency = <0>; // from bootloader
50 system-frequency = <0>; // from bootloader
53 compatible = "fsl,mpc5200-cdm";
57 mpc5200_pic: interrupt-controller@500 {
59 interrupt-controller;
60 #interrupt-cells = <3>;
61 compatible = "fsl,mpc5200-pic";
66 compatible = "fsl,mpc5200-gpt";
69 fsl,has-wdt;
73 compatible = "fsl,mpc5200-mscan";
79 compatible = "fsl,mpc5200-mscan";
85 compatible = "fsl,mpc5200-gpio";
88 gpio-controller;
89 #gpio-cells = <2>;
93 compatible = "fsl,mpc5200-ohci","ohci-be";
98 dma-controller@1200 {
99 device_type = "dma-controller";
100 compatible = "fsl,mpc5200-bestcomm";
109 compatible = "fsl,mpc5200-xlb";
114 compatible = "fsl,mpc5200-psc-uart";
120 compatible = "fsl,mpc5200-psc-uart";
126 compatible = "fsl,mpc5200-fec";
128 local-mac-address = [ 00 00 00 00 00 00 ];
130 fixed-link = <1 1 100 0 0>;
134 #address-cells = <1>;
135 #size-cells = <0>;
136 compatible = "fsl,mpc5200-mdio";
142 compatible = "fsl,mpc5200-ata";
147 i2c@3d00 {
148 #address-cells = <1>;
149 #size-cells = <0>;
150 compatible = "fsl,mpc5200-i2c","fsl-i2c";
156 i2c@3d40 {
157 #address-cells = <1>;
158 #size-cells = <0>;
159 compatible = "fsl,mpc5200-i2c","fsl-i2c";
175 compatible = "fsl,mpc5200-sram";
181 compatible = "fsl,mpc5200-lpb","simple-bus";
182 #address-cells = <2>;
183 #size-cells = <1>;
189 compatible = "cfi-flash";
191 bank-width = <4>;
192 device-width = <2>;
193 #size-cells = <1>;
194 #address-cells = <1>;
201 mode = "640x480-32@60";
203 little-endian;
207 compatible = "mtd-ram";
209 bank-width = <1>;
214 #interrupt-cells = <1>;
215 #size-cells = <2>;
216 #address-cells = <3>;
218 compatible = "fsl,mpc5200-pci";
220 interrupt-map-mask = <0xf800 0 0 7>;
221 interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3
225 clock-frequency = <0>; // From boot loader
227 bus-range = <0 0>;