Lines Matching +full:i2c0 +full:- +full:pins

1 // SPDX-License-Identifier: GPL-2.0
6 /dts-v1/;
8 #include "dt-bindings/thermal/thermal.h"
9 #include "loongson-2k1000.dtsi"
12 	compatible = "loongson,ls2k1000-ref", "loongson,ls2k1000";
13 	model = "Loongson-2K1000 Reference Board";
20 		stdout-path = "serial0:115200n8";
30 	reserved-memory {
31 		#address-cells = <2>;
32 		#size-cells = <2>;
36 			compatible = "shared-dma-pool";
39 			linux,cma-default;
43 	fan0: pwm-fan {
44 		compatible = "pwm-fan";
45 		cooling-levels = <255 153 85 25>;
47 		#cooling-cells = <2>;
58 	pinctrl-0 = <&sdio_pins_default>;
59 	pinctrl-names = "default";
60 	bus-width = <4>;
61 	cd-gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
67 	phy-mode = "rgmii-id";
68 	phy-handle = <&phy0>;
70 		compatible = "snps,dwmac-mdio";
71 		#address-cells = <1>;
72 		#size-cells = <0>;
73 		phy0: ethernet-phy@0 {
82 	phy-mode = "rgmii-id";
83 	phy-handle = <&phy1>;
85 		compatible = "snps,dwmac-mdio";
86 		#address-cells = <1>;
87 		#size-cells = <0>;
88 		phy1: ethernet-phy@1 {
97 	pinctrl-0 = <&i2c0_pins_default>;
98 	pinctrl-names = "default";
100 	#address-cells = <1>;
101 	#size-cells = <0>;
112 	#address-cells = <1>;
113 	#size-cells = <0>;
119 	pinctrl-0 = <&pwm1_pins_default>;
120 	pinctrl-names = "default";
124 	cooling-maps {
127 			cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
155 	sdio_pins_default: sdio-pins {
156 		sdio-pinmux {
160 		sdio-det-pinmux {
166 	pwm1_pins_default: pwm1-pins {
173 	pwm0_pins_default: pwm0-pins {
180 	i2c1_pins_default: i2c1-pins {
187 	i2c0_pins_default: i2c0-pins {
189 			groups = "i2c0";
190 			function = "i2c0";
194 	nand_pins_default: nand-pins {
201 	hda_pins_default: hda-pins {
202 		grp0-pinmux {
206 		grp1-pinmux {