Lines Matching +full:ain0 +full:- +full:ain1
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/leds/common.h>
8 #include <dt-bindings/pinctrl/rockchip.h>
10 #include "rk3566-soquartz.dtsi"
14 compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566";
21 vcc3v0_sd: vcc3v0-sd-regulator {
22 compatible = "regulator-fixed";
23 regulator-name = "vcc3v0_sd";
24 regulator-always-on;
25 regulator-boot-on;
26 regulator-min-microvolt = <3300000>;
27 regulator-max-microvolt = <3300000>;
28 vin-supply = <&vcc3v3_sys>;
32 vcc3v3_pcie_p: vcc3v3-pcie-regulator {
33 compatible = "regulator-fixed";
34 regulator-name = "vcc3v3_pcie_p";
35 regulator-always-on;
36 regulator-boot-on;
37 regulator-min-microvolt = <3300000>;
38 regulator-max-microvolt = <3300000>;
39 vin-supply = <&vbus>;
42 vcc5v_dcin: vcc5v-dcin-regulator {
43 compatible = "regulator-fixed";
44 regulator-name = "vcc5v_dcin";
45 regulator-always-on;
46 regulator-boot-on;
47 regulator-min-microvolt = <5000000>;
48 regulator-max-microvolt = <5000000>;
53 phy-supply = <&vcc3v3_sys>;
63 * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu
64 * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu
72 * i2c2 is exposed on CM1 / Module1A - to PI40
73 * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch
74 * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3
81 * i2c3 is exposed on CM1 / Module1A - to PI40
82 * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3
83 * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3
90 * i2c4 is exposed on CM2 / Module1B - to PI40
91 * pin 45 - GPIO24 - i2c4_scl_m1
92 * pin 47 - GPIO23 - i2c4_sda_m1
99 * i2s1_8ch is exposed on CM1 / Module1A - to PI40
100 * pin 24 - GPIO26 - i2s1_sdi1_m1
101 * pin 25 - GPIO21 - i2s1_sdo0_m1
102 * pin 26 - GPIO19 - i2s1_lrck_tx_m1
103 * pin 27 - GPIO20 - i2s1_sdi0_m1
104 * pin 29 - GPIO16 - i2s1_sdi3_m1
105 * pin 30 - GPIO6 - i2s1_sdi2_m1
106 * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3
107 * pin 41 - GPIO25 - i2s1_sdo2_m1
108 * pin 49 - GPIO18 - i2s1_sclk_tx_m1
109 * pin 50 - GPIO17 - i2s1_mclk_m1
110 * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2
119 linux,default-trigger = "disk-activity";
126 linux,default-trigger = "heartbeat";
131 vpcie3v3-supply = <&vcc3v3_pcie_p>;
140 * saradc is exposed on CM1 / Module1A - to J2
141 * pin 94 - AIN1 - saradc_vin3
142 * pin 96 - AIN0 - saradc_vin2
149 vmmc-supply = <&vcc3v0_sd>;
154 * spi3 is exposed on CM1 / Module1A - to PI40
155 * pin 37 - GPIO7 - spi3_cs1_m0
156 * pin 38 - GPIO11 - spi3_clk_m0
157 * pin 39 - GPIO8 - spi3_cs0_m0
158 * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch
159 * pin 44 - GPIO10 - spi3_mosi_m0
166 * uart2 is exposed on CM1 / Module1A - to PI40
167 * pin 51 - GPIO15 - uart2_rx_m0
168 * pin 55 - GPIO14 - uart2_tx_m0
175 * uart7 is exposed on CM1 / Module1A - to PI40
176 * pin 46 - GPIO22 - uart7_tx_m2
177 * pin 47 - GPIO23 - uart7_rx_m2
188 phy-supply = <&vbus>;
197 vin-supply = <&vcc5v_dcin>;