Lines Matching +full:no +full:- +full:sdio
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/leds/common.h>
10 compatible = "radxa,rock-s0", "rockchip,rk3308";
16 mmc2 = &sdio;
20 stdout-path = "serial0:1500000n8";
24 compatible = "gpio-leds";
25 pinctrl-names = "default";
26 pinctrl-0 = <&pwr_led>;
28 led-green {
30 default-state = "on";
33 linux,default-trigger = "heartbeat";
37 vdd_log: regulator-1v04-vdd-log {
38 compatible = "regulator-fixed";
39 regulator-name = "vdd_log";
40 regulator-always-on;
41 regulator-boot-on;
42 regulator-min-microvolt = <1040000>;
43 regulator-max-microvolt = <1040000>;
44 vin-supply = <&vcc5v0_sys>;
47 vcc_ddr: regulator-1v5-vcc-ddr {
48 compatible = "regulator-fixed";
49 regulator-name = "vcc_ddr";
50 regulator-always-on;
51 regulator-boot-on;
52 regulator-min-microvolt = <1500000>;
53 regulator-max-microvolt = <1500000>;
54 vin-supply = <&vcc5v0_sys>;
57 vcc_1v8: regulator-1v8-vcc {
58 compatible = "regulator-fixed";
59 regulator-name = "vcc_1v8";
60 regulator-always-on;
61 regulator-boot-on;
62 regulator-min-microvolt = <1800000>;
63 regulator-max-microvolt = <1800000>;
64 vin-supply = <&vcc_io>;
67 vcc_io: regulator-3v3-vcc-io {
68 compatible = "regulator-fixed";
69 regulator-name = "vcc_io";
70 regulator-always-on;
71 regulator-boot-on;
72 regulator-min-microvolt = <3300000>;
73 regulator-max-microvolt = <3300000>;
74 vin-supply = <&vcc5v0_sys>;
79 * This is modeled as an always-on active low fixed regulator.
81 vcc_sd: regulator-3v3-vcc-sd {
82 compatible = "regulator-fixed";
84 pinctrl-names = "default";
85 pinctrl-0 = <&sdmmc_2030>;
86 regulator-name = "vcc_sd";
87 regulator-always-on;
88 regulator-boot-on;
89 regulator-min-microvolt = <3300000>;
90 regulator-max-microvolt = <3300000>;
91 vin-supply = <&vcc_io>;
94 vcc5v0_sys: regulator-5v0-vcc-sys {
95 compatible = "regulator-fixed";
96 regulator-name = "vcc5v0_sys";
97 regulator-always-on;
98 regulator-boot-on;
99 regulator-min-microvolt = <5000000>;
100 regulator-max-microvolt = <5000000>;
103 vdd_core: regulator-vdd-core {
104 compatible = "pwm-regulator";
106 pwm-supply = <&vcc5v0_sys>;
107 regulator-name = "vdd_core";
108 regulator-always-on;
109 regulator-boot-on;
110 regulator-min-microvolt = <827000>;
111 regulator-max-microvolt = <1340000>;
112 regulator-settling-time-up-us = <250>;
115 sdio_pwrseq: sdio-pwrseq {
116 compatible = "mmc-pwrseq-simple";
117 pinctrl-names = "default";
118 pinctrl-0 = <&wifi_reg_on>;
119 reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
124 cpu-supply = <&vdd_core>;
128 cap-mmc-highspeed;
129 no-sd;
130 no-sdio;
131 non-removable;
132 pinctrl-names = "default";
133 pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_pwren>;
134 vmmc-supply = <&vcc_io>;
140 phy-handle = <&rtl8201f>;
141 phy-supply = <&vcc_io>;
145 compatible = "snps,dwmac-mdio";
146 #address-cells = <1>;
147 #size-cells = <0>;
149 rtl8201f: ethernet-phy@1 {
150 compatible = "ethernet-phy-ieee802.3-c22";
152 pinctrl-names = "default";
153 pinctrl-0 = <&mac_rst>;
154 reset-assert-us = <20000>;
155 reset-deassert-us = <50000>;
156 reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
162 vccio0-supply = <&vcc_io>;
163 vccio1-supply = <&vcc_io>;
164 vccio2-supply = <&vcc_io>;
165 vccio3-supply = <&vcc_io>;
166 vccio4-supply = <&vcc_1v8>;
167 vccio5-supply = <&vcc_io>;
172 pinctrl-names = "default";
173 pinctrl-0 = <&rtc_32k>;
176 bt_reg_on: bt-reg-on {
180 bt_wake_host: bt-wake-host {
184 host_wake_bt: host-wake-bt {
190 mac_rst: mac-rst {
196 pwr_led: pwr-led {
202 sdmmc_2030: sdmmc-2030 {
208 wifi_reg_on: wifi-reg-on {
212 wifi_wake_host: wifi-wake-host {
219 pinctrl-names = "default";
220 pinctrl-0 = <&pwm0_pin_pull_down>;
225 vref-supply = <&vcc_1v8>;
229 &sdio {
230 #address-cells = <1>;
231 #size-cells = <0>;
232 cap-sd-highspeed;
233 cap-sdio-irq;
234 keep-power-in-suspend;
235 max-frequency = <50000000>;
236 mmc-pwrseq = <&sdio_pwrseq>;
237 no-mmc;
238 no-sd;
239 non-removable;
240 vmmc-supply = <&vcc_io>;
241 vqmmc-supply = <&vcc_1v8>;
245 compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
247 interrupt-parent = <&gpio0>;
249 interrupt-names = "host-wake";
250 pinctrl-names = "default";
251 pinctrl-0 = <&wifi_wake_host>;
256 cap-mmc-highspeed;
257 cap-sd-highspeed;
258 disable-wp;
259 vmmc-supply = <&vcc_sd>;
276 pinctrl-names = "default";
277 pinctrl-0 = <&uart0_xfer>;
282 uart-has-rtscts;
286 compatible = "brcm,bcm43430a1-bt";
288 clock-names = "lpo";
289 interrupt-parent = <&gpio4>;
291 interrupt-names = "host-wakeup";
292 device-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
293 shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
294 pinctrl-names = "default";
295 pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
296 vbat-supply = <&vcc_io>;
297 vddio-supply = <&vcc_1v8>;