Lines Matching +full:int +full:- +full:vref +full:- +full:microvolt
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/leds/common.h>
18 emmc_pwrseq: emmc-pwrseq {
19 compatible = "mmc-pwrseq-emmc";
20 pinctrl-0 = <&emmc_reset>;
21 pinctrl-names = "default";
22 reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
26 compatible = "gpio-leds";
27 pinctrl-names = "default";
28 pinctrl-0 = <&module_led_pin>;
31 module_led: led-0 {
34 linux,default-trigger = "heartbeat";
39 vcc5v0_sys: vccsys-regulator {
40 compatible = "regulator-fixed";
41 regulator-name = "vcc5v0_sys";
42 regulator-always-on;
43 regulator-boot-on;
44 regulator-min-microvolt = <5000000>;
45 regulator-max-microvolt = <5000000>;
50 cpu-supply = <&vdd_arm>;
54 cpu-supply = <&vdd_arm>;
58 cpu-supply = <&vdd_arm>;
62 cpu-supply = <&vdd_arm>;
66 bus-width = <8>;
67 cap-mmc-highspeed;
68 mmc-hs200-1_8v;
69 mmc-pwrseq = <&emmc_pwrseq>;
70 non-removable;
71 vmmc-supply = <&vcc_3v3>;
72 vqmmc-supply = <&vcc_emmc>;
77 /* On-module TI DP83825I PHY but no connector, enable in carrierboard */
79 snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
80 snps,reset-active-low;
81 snps,reset-delays-us = <0 50000 50000>;
82 phy-supply = <&vcc_3v3>;
88 * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module
89 * eMMC powered-down initially (in fact it keeps the reset signal
90 * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after
93 bios-disable-override-hog {
95 output-high;
96 line-name = "bios_disable_override";
97 gpio-hog;
105 bios-disable-n-hog {
107 line-name = "bios_disable";
109 gpio-hog;
123 interrupt-parent = <&gpio0>;
125 pinctrl-0 = <&pmic_int>;
126 pinctrl-names = "default";
127 #clock-cells = <0>;
128 clock-output-names = "xin32k";
129 rockchip,system-power-controller;
130 wakeup-source;
132 vcc1-supply = <&vcc5v0_sys>;
133 vcc2-supply = <&vcc5v0_sys>;
134 vcc3-supply = <&vcc5v0_sys>;
135 vcc4-supply = <&vcc5v0_sys>;
136 vcc5-supply = <&vcc_3v3>;
137 vcc6-supply = <&vcc_3v3>;
138 vcc7-supply = <&vcc_3v3>;
139 vcc9-supply = <&vcc5v0_sys>;
143 regulator-name = "vdd_log";
144 regulator-min-microvolt = <950000>;
145 regulator-max-microvolt = <1350000>;
146 regulator-ramp-delay = <6001>;
147 regulator-always-on;
148 regulator-boot-on;
150 regulator-state-mem {
151 regulator-on-in-suspend;
152 regulator-suspend-microvolt = <950000>;
157 regulator-name = "vdd_arm";
158 regulator-min-microvolt = <950000>;
159 regulator-max-microvolt = <1350000>;
160 regulator-ramp-delay = <6001>;
161 regulator-always-on;
162 regulator-boot-on;
164 regulator-state-mem {
165 regulator-off-in-suspend;
166 regulator-suspend-microvolt = <950000>;
171 regulator-name = "vcc_ddr";
172 regulator-always-on;
173 regulator-boot-on;
175 regulator-state-mem {
176 regulator-on-in-suspend;
181 regulator-name = "vcc_3v0_1v8";
182 regulator-min-microvolt = <1800000>;
183 regulator-max-microvolt = <3000000>;
184 regulator-always-on;
185 regulator-boot-on;
187 regulator-state-mem {
188 regulator-on-in-suspend;
189 regulator-suspend-microvolt = <3000000>;
194 regulator-name = "vcc_3v3";
195 regulator-min-microvolt = <3300000>;
196 regulator-max-microvolt = <3300000>;
197 regulator-always-on;
198 regulator-boot-on;
200 regulator-state-mem {
201 regulator-on-in-suspend;
202 regulator-suspend-microvolt = <3300000>;
207 regulator-name = "vcc_1v8";
208 regulator-min-microvolt = <1800000>;
209 regulator-max-microvolt = <1800000>;
210 regulator-always-on;
211 regulator-boot-on;
213 regulator-state-mem {
214 regulator-on-in-suspend;
215 regulator-suspend-microvolt = <1800000>;
220 regulator-name = "vcc_1v0";
221 regulator-min-microvolt = <1000000>;
222 regulator-max-microvolt = <1000000>;
223 regulator-always-on;
224 regulator-boot-on;
226 regulator-state-mem {
227 regulator-on-in-suspend;
228 regulator-suspend-microvolt = <1000000>;
233 regulator-name = "vccio_sd";
234 regulator-min-microvolt = <1800000>;
235 regulator-max-microvolt = <3300000>;
236 regulator-always-on;
237 regulator-boot-on;
239 regulator-state-mem {
240 regulator-on-in-suspend;
241 regulator-suspend-microvolt = <3300000>;
246 regulator-always-on;
247 regulator-boot-on;
248 regulator-min-microvolt = <1000000>;
249 regulator-max-microvolt = <1000000>;
250 regulator-name = "vcc_lcd";
252 regulator-state-mem {
253 regulator-off-in-suspend;
254 regulator-suspend-microvolt = <1000000>;
259 regulator-name = "vcc_1v8_lcd";
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <1800000>;
262 regulator-always-on;
263 regulator-boot-on;
265 regulator-state-mem {
266 regulator-on-in-suspend;
267 regulator-suspend-microvolt = <1800000>;
272 regulator-name = "vcca_1v8";
273 regulator-min-microvolt = <1800000>;
274 regulator-max-microvolt = <1800000>;
275 regulator-always-on;
276 regulator-boot-on;
278 regulator-state-mem {
279 regulator-off-in-suspend;
280 regulator-suspend-microvolt = <1800000>;
291 clock-frequency = <400000>;
296 #cooling-cells = <2>;
310 rockchip,trcm-sync-tx-only;
312 pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx
317 vccio1-supply = <&vcc_3v3>;
318 vccio2-supply = <&vccio_sd>;
319 vccio3-supply = <&vcc_3v3>;
320 vccio4-supply = <&vcc_3v3>;
321 vccio5-supply = <&vcc_3v3>;
322 vccio6-supply = <&vcc_emmc>;
323 vccio-oscgpi-supply = <&vcc_3v3>;
330 emmc_reset: emmc-reset {
336 module_led_pin: module-led-pin {
342 pmic_int: pmic-int {
350 pmuio1-supply = <&vcc_3v3>;
351 pmuio2-supply = <&vcc_3v3>;
356 vref-supply = <&vcc_1v8>;
361 vqmmc-supply = <&vccio_sd>;