Lines Matching +full:hog +full:-
1 // SPDX-License-Identifier: GPL-2.0
18 #clock-cells = <0>;
19 compatible = "gpio-mux-clock";
21 select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
24 hdmi1-out {
25 compatible = "hdmi-connector";
30 remote-endpoint = <&adv7513_out>;
35 reg_t1p8v: regulator-t1p8v {
36 compatible = "regulator-fixed";
37 regulator-name = "T1.8V";
38 regulator-min-microvolt = <1800000>;
39 regulator-max-microvolt = <1800000>;
40 regulator-boot-on;
41 regulator-always-on;
44 pcie_1v5: regulator-pcie-1v5 {
45 compatible = "regulator-fixed";
46 regulator-name = "pcie-1v5";
47 regulator-min-microvolt = <1500000>;
48 regulator-max-microvolt = <1500000>;
50 enable-active-high;
53 pcie_3v3: regulator-pcie-3v3 {
54 compatible = "regulator-fixed";
55 regulator-name = "pcie-3v3";
56 regulator-min-microvolt = <3300000>;
57 regulator-max-microvolt = <3300000>;
59 enable-active-high;
62 reg_5v: regulator-5v {
63 compatible = "regulator-fixed";
64 regulator-name = "fixed-5V";
65 regulator-min-microvolt = <5000000>;
66 regulator-max-microvolt = <5000000>;
67 regulator-boot-on;
68 regulator-always-on;
71 wlan_en: regulator-wlan_en {
72 compatible = "regulator-fixed";
73 regulator-name = "wlan-en-regulator";
75 regulator-min-microvolt = <3300000>;
76 regulator-max-microvolt = <3300000>;
79 startup-delay-us = <70000>;
80 enable-active-high;
85 pinctrl-0 = <&can0_pins>;
86 pinctrl-names = "default";
91 pinctrl-0 = <&can1_pins>;
92 pinctrl-names = "default";
100 remote-endpoint = <&adv7513_in>;
112 pinctrl-0 = <&hscif0_pins>;
113 pinctrl-names = "default";
114 uart-has-rtscts;
120 pinctrl-0 = <&hscif1_pins>;
121 pinctrl-names = "default";
122 uart-has-rtscts;
133 i2cmux2: i2c-mux@71 {
135 #address-cells = <1>;
136 #size-cells = <0>;
138 reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
142 #address-cells = <1>;
143 #size-cells = <0>;
150 pinctrl-0 = <&hdmi1_pins>;
151 pinctrl-names = "default";
153 interrupt-parent = <&gpio2>;
157 clock-names = "cec";
159 pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>;
161 avdd-supply = <®_t1p8v>;
162 dvdd-supply = <®_t1p8v>;
163 pvdd-supply = <®_t1p8v>;
164 dvdd-3v-supply = <®_3p3v>;
165 bgvdd-supply = <®_t1p8v>;
167 adi,input-depth = <8>;
168 adi,input-colorspace = "rgb";
169 adi,input-clock = "1x";
172 #address-cells = <1>;
173 #size-cells = <0>;
178 remote-endpoint = <&du_out_rgb>;
185 remote-endpoint = <&hdmi1_con>;
194 #address-cells = <1>;
195 #size-cells = <0>;
199 compatible = "st,lsm9ds0-imu";
202 vdd-supply = <®_3p3v>;
203 vddio-supply = <®_3p3v>;
206 pcm3168a: audio-codec@44 {
207 #sound-dai-cells = <0>;
211 clock-names = "scki";
213 VDD1-supply = <®_3p3v>;
214 VDD2-supply = <®_3p3v>;
215 VCCAD1-supply = <®_5v>;
216 VCCAD2-supply = <®_5v>;
217 VCCDA1-supply = <®_5v>;
218 VCCDA2-supply = <®_5v>;
222 compatible = "st,lsm9ds0-gyro";
225 vdd-supply = <®_3p3v>;
226 vddio-supply = <®_3p3v>;
235 gpio-controller;
236 #gpio-cells = <2>;
237 interrupt-controller;
238 #interrupt-cells = <2>;
239 interrupt-parent = <&gpio6>;
242 audio-out-off-hog {
243 gpio-hog;
245 output-high;
246 line-name = "Audio_Out_OFF";
249 hub-pwen-hog {
250 gpio-hog;
252 output-high;
253 line-name = "HUB pwen";
256 hub-rst-hog {
257 gpio-hog;
259 output-high;
260 line-name = "HUB rst";
263 otg-extlpn-hog {
264 gpio-hog;
266 output-high;
267 line-name = "OTG EXTLPn";
270 otg-offvbusn-hog {
271 gpio-hog;
273 output-low;
274 line-name = "OTG OFFVBUSn";
277 sd-wifi-mux-hog {
278 gpio-hog;
280 output-low; /* Connect WL1837 */
281 line-name = "SD WiFi mux";
284 snd-rst-hog {
285 gpio-hog;
287 output-high;
288 line-name = "SND_RST";
296 gpio-controller;
297 #gpio-cells = <2>;
298 interrupt-controller;
299 #interrupt-cells = <2>;
300 interrupt-parent = <&gpio6>;
306 i2cmux4: i2c-mux@71 {
308 #address-cells = <1>;
309 #size-cells = <0>;
311 reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
317 gpio-controller;
318 #gpio-cells = <2>;
319 interrupt-controller;
320 #interrupt-cells = <2>;
321 interrupt-parent = <&gpio7>;
328 gpio-controller;
329 #gpio-cells = <2>;
330 interrupt-controller;
331 #interrupt-cells = <2>;
332 interrupt-parent = <&gpio5>;
343 clock-frequency = <100000000>;
353 vpcie1v5-supply = <&pcie_1v5>;
354 vpcie3v3-supply = <&pcie_3v3>;
369 adv7513-interrupt {
371 bias-pull-up;
399 power-source = <3300>;
402 sound_pcm_pins: sound-pcm {
414 pinctrl-0 = <&sound_pins
420 pinctrl-0 = <&scif1_pins>;
421 pinctrl-names = "default";
426 compatible = "u-blox,neo-m8";
427 reset-gpios = <&gpio_exp_75 6 GPIO_ACTIVE_LOW>;
428 vcc-supply = <®_3p3v>;
429 current-speed = <9600>;
434 pinctrl-0 = <&sdhi3_pins>;
435 pinctrl-names = "default";
437 vmmc-supply = <&wlan_en>;
438 vqmmc-supply = <&wlan_en>;
439 bus-width = <4>;
440 no-1-8-v;
441 non-removable;
442 cap-power-off-card;
443 keep-power-in-suspend;
444 max-frequency = <26000000>;
447 #address-cells = <1>;
448 #size-cells = <0>;
452 interrupt-parent = <&gpio1>;
458 shared-pin;
462 pinctrl-0 = <&usb0_pins>;
463 pinctrl-names = "default";
473 * For sound-test.
478 * #include "ulcb-kf-simple-audio-card.dtsi"
479 * #include "ulcb-kf-simple-audio-card-mix+split.dtsi"
480 * #include "ulcb-kf-audio-graph-card.dtsi"
481 * #include "ulcb-kf-audio-graph-card-mix+split.dtsi"
482 * #include "ulcb-kf-audio-graph-card2-mix+split.dtsi"
484 #include "ulcb-kf-audio-graph-card2.dtsi"