Lines Matching +full:i2s +full:- +full:data +full:- +full:lanes

1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
11 #include "rzg2lc-smarc-pinfunction.dtsi"
12 #include "rz-smarc-common.dtsi"
20 	osc1: cec-clock {
21 		compatible = "fixed-clock";
22 		#clock-cells = <0>;
23 		clock-frequency = <12000000>;
26 	hdmi-out {
27 		compatible = "hdmi-connector";
32 				remote-endpoint = <&adv7535_out>;
38 	/delete-node/ sound;
41 		compatible = "audio-graph-card";
42 		label = "HDMI-Audio";
50 	pinctrl-0 = <&can1_pins>;
51 	/delete-node/ channel@0;
55 	/delete-property/ pinctrl-0;
56 	/delete-property/ pinctrl-names;
63 	sound-dai = <&ssi0>;
73 				data-lanes = <1 2 3 4>;
74 				remote-endpoint = <&adv7535_in>;
89 		interrupts-extended = <&pinctrl RZG2L_GPIO(43, 1) IRQ_TYPE_EDGE_FALLING>;
91 		clock-names = "cec";
92 		avdd-supply = <&reg_1p8v>;
93 		dvdd-supply = <&reg_1p8v>;
94 		pvdd-supply = <&reg_1p8v>;
95 		a2vdd-supply = <&reg_1p8v>;
96 		v3p3-supply = <&reg_3p3v>;
97 		v1p2-supply = <&reg_1p8v>;
99 		adi,dsi-lanes = <4>;
102 			#address-cells = <1>;
103 			#size-cells = <0>;
108 					remote-endpoint = <&dsi0_out>;
115 					remote-endpoint = <&hdmi_con_out>;
123 					remote-endpoint = <&i2s2_cpu_endpoint>;
132 	pinctrl-0 = <&i2c2_pins>;
133 	pinctrl-names = "default";
134 	clock-frequency = <400000>;
140 		#sound-dai-cells = <0>;
144 	versa3: clock-generator@68 {
147 		#clock-cells = <1>;
156 		assigned-clocks = <&versa3 0>, <&versa3 1>,
159 		assigned-clock-rates = <24000000>, <11289600>,
167 	pinctrl-0 = <&mtu3_pins>;
168 	pinctrl-names = "default";
180  * SW1 should be at position 2->3 so that SER0_CTS# line is activated
181  * SW2 should be at position 2->3 so that SER0_TX line is activated
182  * SW3 should be at position 2->3 so that SER0_RX line is activated
183  * SW4 should be at position 2->3 so that SER0_RTS# line is activated
187 	pinctrl-0 = <&scif1_pins>;
188 	pinctrl-names = "default";
190 	uart-has-rtscts;
196 	pinctrl-0 = <&ssi0_pins>;
197 	pinctrl-names = "default";
204 			remote-endpoint = <&codec_endpoint>;
205 			dai-format = "i2s";
207 			bitclock-master = <&i2s2_cpu_endpoint>;
208 			frame-master = <&i2s2_cpu_endpoint>;
216 	/delete-property/ pinctrl-0;
217 	/delete-property/ pinctrl-names;