Lines Matching +full:canfd +full:- +full:2

1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
11 #include "rzg2lc-smarc-pinfunction.dtsi"
12 #include "rz-smarc-common.dtsi"
20 	osc1: cec-clock {
21 		compatible = "fixed-clock";
22 		#clock-cells = <0>;
23 		clock-frequency = <12000000>;
26 	hdmi-out {
27 		compatible = "hdmi-connector";
32 				remote-endpoint = <&adv7535_out>;
38 	/delete-node/ sound;
41 		compatible = "audio-graph-card";
42 		label = "HDMI-Audio";
49 &canfd {
50 	pinctrl-0 = <&can1_pins>;
51 	/delete-node/ channel@0;
54 &canfd {
55 	/delete-property/ pinctrl-0;
56 	/delete-property/ pinctrl-names;
63 	sound-dai = <&ssi0>;
73 				data-lanes = <1 2 3 4>;
74 				remote-endpoint = <&adv7535_in>;
89 		interrupt-parent = <&pinctrl>;
92 		clock-names = "cec";
93 		avdd-supply = <&reg_1p8v>;
94 		dvdd-supply = <&reg_1p8v>;
95 		pvdd-supply = <&reg_1p8v>;
96 		a2vdd-supply = <&reg_1p8v>;
97 		v3p3-supply = <&reg_3p3v>;
98 		v1p2-supply = <&reg_1p8v>;
100 		adi,dsi-lanes = <4>;
103 			#address-cells = <1>;
104 			#size-cells = <0>;
109 					remote-endpoint = <&dsi0_out>;
116 					remote-endpoint = <&hdmi_con_out>;
121 			port@2 {
122 				reg = <2>;
124 					remote-endpoint = <&i2s2_cpu_endpoint>;
133 	pinctrl-0 = <&i2c2_pins>;
134 	pinctrl-names = "default";
135 	clock-frequency = <400000>;
141 		#sound-dai-cells = <0>;
145 	versa3: clock-generator@68 {
148 		#clock-cells = <1>;
157 		assigned-clocks = <&versa3 0>, <&versa3 1>,
158 				  <&versa3 2>, <&versa3 3>,
160 		assigned-clock-rates = <24000000>, <11289600>,
168 	pinctrl-0 = <&mtu3_pins>;
169 	pinctrl-names = "default";
181  * SW1 should be at position 2->3 so that SER0_CTS# line is activated
182  * SW2 should be at position 2->3 so that SER0_TX line is activated
183  * SW3 should be at position 2->3 so that SER0_RX line is activated
184  * SW4 should be at position 2->3 so that SER0_RTS# line is activated
188 	pinctrl-0 = <&scif1_pins>;
189 	pinctrl-names = "default";
191 	uart-has-rtscts;
197 	pinctrl-0 = <&ssi0_pins>;
198 	pinctrl-names = "default";
205 			remote-endpoint = <&codec_endpoint>;
206 			dai-format = "i2s";
208 			bitclock-master = <&i2s2_cpu_endpoint>;
209 			frame-master = <&i2s2_cpu_endpoint>;
217 	/delete-property/ pinctrl-0;
218 	/delete-property/ pinctrl-names;