Lines Matching +full:pinmux +full:-
1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
12 pinctrl-0 = <&sound_clk_pins>;
13 pinctrl-names = "default";
16 pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
20 /* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
21 can0-stb-hog {
22 gpio-hog;
24 output-low;
25 line-name = "can0_stb";
29 pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
33 /* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
34 can1-stb-hog {
35 gpio-hog;
37 output-low;
38 line-name = "can1_stb";
42 pinmux = <RZG2L_PORT_PINMUX(43, 0, 2)>, /* GTIOC4A */
48 input-enable;
53 input-enable;
57 pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
62 mtu3-ext-clk-input-pin {
63 pinmux = <RZG2L_PORT_PINMUX(48, 0, 4)>, /* MTCLKA */
67 mtu3-pwm {
68 pinmux = <RZG2L_PORT_PINMUX(44, 0, 4)>, /* MTIOC3A */
75 mtu3-zphase-clk {
76 pinmux = <RZG2L_PORT_PINMUX(19, 0, 3)>; /* MTIOC1A */
82 pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */
87 pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */
93 sd1-pwr-en-hog {
94 gpio-hog;
96 output-high;
97 line-name = "sd1_pwr_en";
103 power-source = <3300>;
108 power-source = <3300>;
112 pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
119 power-source = <1800>;
124 power-source = <1800>;
128 pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
134 input-enable;
138 pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
145 pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
152 pinmux = <RZG2L_PORT_PINMUX(46, 0, 1)>, /* BCK */
158 pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
164 pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */