Lines Matching +full:lvds +full:- +full:decoder
1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
11 #include <dt-bindings/gpio/gpio.h>
27 stdout-path = "serial0:115200n8";
30 hdmi-out {
31 compatible = "hdmi-connector";
36 remote-endpoint = <&adv7511_out>;
41 lvds-decoder {
43 vcc-supply = <&vcc_d3_3v>;
46 #address-cells = <1>;
47 #size-cells = <0>;
52 remote-endpoint = <&lvds0_out>;
59 remote-endpoint = <&adv7511_in>;
71 osc5_clk: osc5-clock {
72 compatible = "fixed-clock";
73 #clock-cells = <0>;
74 clock-frequency = <148500000>;
77 vcc_d1_8v: regulator-0 {
78 compatible = "regulator-fixed";
79 regulator-name = "VCC_D1.8V";
80 regulator-min-microvolt = <1800000>;
81 regulator-max-microvolt = <1800000>;
82 regulator-boot-on;
83 regulator-always-on;
86 vcc_d3_3v: regulator-1 {
87 compatible = "regulator-fixed";
88 regulator-name = "VCC_D3.3V";
89 regulator-min-microvolt = <3300000>;
90 regulator-max-microvolt = <3300000>;
91 regulator-boot-on;
92 regulator-always-on;
95 vcc_vddq_vin0: regulator-2 {
96 compatible = "regulator-fixed";
97 regulator-name = "VCC_VDDQ_VIN0";
98 regulator-min-microvolt = <3300000>;
99 regulator-max-microvolt = <3300000>;
100 regulator-boot-on;
101 regulator-always-on;
106 pinctrl-0 = <&avb_pins>;
107 pinctrl-names = "default";
109 renesas,no-ether-link;
110 phy-handle = <&phy0>;
111 rx-internal-delay-ps = <1800>;
112 tx-internal-delay-ps = <2000>;
115 phy0: ethernet-phy@0 {
116 compatible = "ethernet-phy-id0022.1622",
117 "ethernet-phy-ieee802.3-c22";
118 rxc-skew-ps = <1500>;
120 interrupt-parent = <&gpio1>;
122 reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
129 clock-names = "du.0", "dclkin.0";
134 clock-frequency = <16666666>;
138 clock-frequency = <32768>;
142 pinctrl-0 = <&i2c0_pins>;
143 pinctrl-names = "default";
146 clock-frequency = <400000>;
150 #sound-dai-cells = <0>;
152 interrupt-parent = <&gpio1>;
154 avdd-supply = <&vcc_d1_8v>;
155 dvdd-supply = <&vcc_d1_8v>;
156 pvdd-supply = <&vcc_d1_8v>;
157 bgvdd-supply = <&vcc_d1_8v>;
158 dvdd-3v-supply = <&vcc_d3_3v>;
160 adi,input-depth = <8>;
161 adi,input-colorspace = "rgb";
162 adi,input-clock = "1x";
165 #address-cells = <1>;
166 #size-cells = <0>;
171 remote-endpoint = <&thc63lvd1024_out>;
178 remote-endpoint = <&hdmi_con>;
191 remote-endpoint = <&thc63lvd1024_in>;
198 pinctrl-0 = <&mmc_pins>;
199 pinctrl-names = "default";
201 vmmc-supply = <&vcc_d3_3v>;
202 vqmmc-supply = <&vcc_vddq_vin0>;
203 bus-width = <8>;
204 non-removable;
222 power-source = <3300>;
237 pinctrl-0 = <&qspi0_pins>;
238 pinctrl-names = "default";
243 compatible = "spansion,s25fs512s", "jedec,spi-nor";
245 spi-max-frequency = <50000000>;
246 spi-rx-bus-width = <4>;
249 compatible = "fixed-partitions";
250 #address-cells = <1>;
251 #size-cells = <1>;
255 read-only;
259 read-only;
263 read-only;
267 read-only;
271 read-only;
275 read-only;
279 read-only;
281 uboot-env@700000 {
283 read-only;
299 pinctrl-0 = <&scif0_pins>;
300 pinctrl-names = "default";