Lines Matching +full:pmic +full:- +full:glink
1 // SPDX-License-Identifier: BSD-3-Clause
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/gpio-keys.h>
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/leds/common.h>
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
13 #include "x1e80100-pmics.dtsi"
25 wcd938x: audio-codec {
26 compatible = "qcom,wcd9385-codec";
28 reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
30 qcom,micbias1-microvolt = <1800000>;
31 qcom,micbias2-microvolt = <1800000>;
32 qcom,micbias3-microvolt = <1800000>;
33 qcom,micbias4-microvolt = <1800000>;
34 qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
35 qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
36 qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
37 qcom,rx-device = <&wcd_rx>;
38 qcom,tx-device = <&wcd_tx>;
41 vdd-buck-supply = <&vreg_l15b>;
42 vdd-rxtx-supply = <&vreg_l15b>;
43 vdd-io-supply = <&vreg_l15b>;
44 vdd-mic-bias-supply = <&vreg_bob1>;
46 pinctrl-0 = <&wcd_default>;
47 pinctrl-names = "default";
49 #sound-dai-cells = <1>;
53 compatible = "pwm-backlight";
55 enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
56 /* TODO: power-supply? */
58 pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
59 pinctrl-names = "default";
62 gpio-keys {
63 compatible = "gpio-keys";
65 pinctrl-0 = <&hall_int_n_default>;
66 pinctrl-names = "default";
68 switch-lid {
70 linux,input-type = <EV_SW>;
72 wakeup-source;
73 wakeup-event-action = <EV_ACT_DEASSERTED>;
78 compatible = "gpio-leds";
80 pinctrl-names = "default";
81 pinctrl-0 = <&cam_indicator_en>;
83 led-camera-indicator {
84 label = "white:camera-indicator";
88 linux,default-trigger = "none";
89 default-state = "off";
91 panic-indicator;
95 pmic-glink {
96 compatible = "qcom,x1e80100-pmic-glink",
97 "qcom,sm8550-pmic-glink",
98 "qcom,pmic-glink";
99 #address-cells = <1>;
100 #size-cells = <0>;
101 orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
104 /* Left-side rear port */
106 compatible = "usb-c-connector";
108 power-role = "dual";
109 data-role = "dual";
112 #address-cells = <1>;
113 #size-cells = <0>;
119 remote-endpoint = <&usb_1_ss0_dwc3_hs>;
127 remote-endpoint = <&retimer_ss0_ss_out>;
135 remote-endpoint = <&retimer_ss0_con_sbu_out>;
141 /* Left-side front port */
143 compatible = "usb-c-connector";
145 power-role = "dual";
146 data-role = "dual";
149 #address-cells = <1>;
150 #size-cells = <0>;
156 remote-endpoint = <&usb_1_ss1_dwc3_hs>;
164 remote-endpoint = <&retimer_ss1_ss_out>;
172 remote-endpoint = <&retimer_ss1_con_sbu_out>;
179 reserved-memory {
181 compatible = "shared-dma-pool";
184 linux,cma-default;
188 vreg_edp_3p3: regulator-edp-3p3 {
189 compatible = "regulator-fixed";
191 regulator-name = "VREG_EDP_3P3";
192 regulator-min-microvolt = <3300000>;
193 regulator-max-microvolt = <3300000>;
196 enable-active-high;
198 pinctrl-0 = <&edp_reg_en>;
199 pinctrl-names = "default";
201 regulator-boot-on;
204 vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
205 compatible = "regulator-fixed";
207 regulator-name = "VREG_RTMR0_1P15";
209 regulator-min-microvolt = <1150000>;
210 regulator-max-microvolt = <1150000>;
213 enable-active-high;
215 pinctrl-0 = <&rtmr0_1p15_reg_en>;
216 pinctrl-names = "default";
218 regulator-boot-on;
221 vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
222 compatible = "regulator-fixed";
224 regulator-name = "VREG_RTMR0_1P8";
226 regulator-min-microvolt = <1800000>;
227 regulator-max-microvolt = <1800000>;
230 enable-active-high;
232 pinctrl-0 = <&rtmr0_1p8_reg_en>;
233 pinctrl-names = "default";
235 regulator-boot-on;
238 vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
239 compatible = "regulator-fixed";
241 regulator-name = "VREG_RTMR0_3P3";
243 regulator-min-microvolt = <3300000>;
244 regulator-max-microvolt = <3300000>;
247 enable-active-high;
249 pinctrl-0 = <&rtmr0_3p3_reg_en>;
250 pinctrl-names = "default";
252 regulator-boot-on;
255 vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
256 compatible = "regulator-fixed";
258 regulator-name = "VREG_RTMR1_1P15";
260 regulator-min-microvolt = <1150000>;
261 regulator-max-microvolt = <1150000>;
264 enable-active-high;
266 pinctrl-0 = <&rtmr1_1p15_reg_en>;
267 pinctrl-names = "default";
269 regulator-boot-on;
272 vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
273 compatible = "regulator-fixed";
275 regulator-name = "VREG_RTMR1_1P8";
277 regulator-min-microvolt = <1800000>;
278 regulator-max-microvolt = <1800000>;
281 enable-active-high;
283 pinctrl-0 = <&rtmr1_1p8_reg_en>;
284 pinctrl-names = "default";
286 regulator-boot-on;
289 vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
290 compatible = "regulator-fixed";
292 regulator-name = "VREG_RTMR1_3P3";
294 regulator-min-microvolt = <3300000>;
295 regulator-max-microvolt = <3300000>;
298 enable-active-high;
300 pinctrl-0 = <&rtmr1_3p3_reg_en>;
301 pinctrl-names = "default";
303 regulator-boot-on;
307 vreg_nvme: regulator-nvme {
308 compatible = "regulator-fixed";
310 regulator-name = "VREG_NVME_3P3";
311 regulator-min-microvolt = <3300000>;
312 regulator-max-microvolt = <3300000>;
315 enable-active-high;
317 pinctrl-0 = <&nvme_reg_en>;
318 pinctrl-names = "default";
320 regulator-boot-on;
323 vph_pwr: regulator-vph-pwr {
324 compatible = "regulator-fixed";
326 regulator-name = "vph_pwr";
327 regulator-min-microvolt = <3700000>;
328 regulator-max-microvolt = <3700000>;
330 regulator-always-on;
331 regulator-boot-on;
335 compatible = "qcom,x1e80100-sndcard";
336 model = "X1E80100-Romulus";
337 audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
348 va-dai-link {
349 link-name = "VA Capture";
352 sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
356 sound-dai = <&lpass_vamacro 0>;
360 sound-dai = <&q6apm>;
364 wcd-capture-dai-link {
365 link-name = "WCD Capture";
368 sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
372 sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
376 sound-dai = <&q6apm>;
380 wcd-playback-dai-link {
381 link-name = "WCD Playback";
384 sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
388 sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
392 sound-dai = <&q6apm>;
396 wsa-dai-link {
397 link-name = "WSA Playback";
400 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
404 sound-dai = <&left_spkr>, <&right_spkr>,
409 sound-dai = <&q6apm>;
416 regulators-0 {
417 compatible = "qcom,pm8550-rpmh-regulators";
418 qcom,pmic-id = "b";
420 vdd-bob1-supply = <&vph_pwr>;
421 vdd-bob2-supply = <&vph_pwr>;
422 vdd-l1-l4-l10-supply = <&vreg_s4c>;
423 vdd-l2-l13-l14-supply = <&vreg_bob1>;
424 vdd-l5-l16-supply = <&vreg_bob1>;
425 vdd-l6-l7-supply = <&vreg_bob2>;
426 vdd-l8-l9-supply = <&vreg_bob1>;
427 vdd-l12-supply = <&vreg_s5j>;
428 vdd-l15-supply = <&vreg_s4c>;
429 vdd-l17-supply = <&vreg_bob2>;
432 regulator-name = "vreg_bob1";
433 regulator-min-microvolt = <3008000>;
434 regulator-max-microvolt = <3960000>;
435 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
439 regulator-name = "vreg_bob2";
440 regulator-min-microvolt = <2504000>;
441 regulator-max-microvolt = <3008000>;
442 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
446 regulator-name = "vreg_l1b";
447 regulator-min-microvolt = <1800000>;
448 regulator-max-microvolt = <1800000>;
449 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
453 regulator-name = "vreg_l2b";
454 regulator-min-microvolt = <3072000>;
455 regulator-max-microvolt = <3072000>;
456 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
460 regulator-name = "vreg_l4b";
461 regulator-min-microvolt = <1800000>;
462 regulator-max-microvolt = <1800000>;
463 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
467 regulator-name = "vreg_l5b";
468 regulator-min-microvolt = <3000000>;
469 regulator-max-microvolt = <3000000>;
470 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
474 regulator-name = "vreg_l6b";
475 regulator-min-microvolt = <1800000>;
476 regulator-max-microvolt = <2960000>;
477 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
481 regulator-name = "vreg_l7b";
482 regulator-min-microvolt = <2800000>;
483 regulator-max-microvolt = <2800000>;
484 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
488 regulator-name = "vreg_l8b";
489 regulator-min-microvolt = <3072000>;
490 regulator-max-microvolt = <3072000>;
491 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
495 regulator-name = "vreg_l9b";
496 regulator-min-microvolt = <2960000>;
497 regulator-max-microvolt = <2960000>;
498 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
502 regulator-name = "vreg_l10b";
503 regulator-min-microvolt = <1800000>;
504 regulator-max-microvolt = <1800000>;
505 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
509 regulator-name = "vreg_l12b";
510 regulator-min-microvolt = <1200000>;
511 regulator-max-microvolt = <1200000>;
512 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
513 regulator-always-on;
517 regulator-name = "vreg_l13b";
518 regulator-min-microvolt = <3072000>;
519 regulator-max-microvolt = <3072000>;
520 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
524 regulator-name = "vreg_l14b";
525 regulator-min-microvolt = <3072000>;
526 regulator-max-microvolt = <3072000>;
527 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
531 regulator-name = "vreg_l15b";
532 regulator-min-microvolt = <1800000>;
533 regulator-max-microvolt = <1800000>;
534 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
535 regulator-always-on;
539 regulator-name = "vreg_l16b";
540 regulator-min-microvolt = <2912000>;
541 regulator-max-microvolt = <2912000>;
542 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
546 regulator-name = "vreg_l17b";
547 regulator-min-microvolt = <2504000>;
548 regulator-max-microvolt = <2504000>;
549 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
553 regulators-1 {
554 compatible = "qcom,pm8550ve-rpmh-regulators";
555 qcom,pmic-id = "c";
557 vdd-l1-supply = <&vreg_s5j>;
558 vdd-l2-supply = <&vreg_s1f>;
559 vdd-l3-supply = <&vreg_s1f>;
560 vdd-s4-supply = <&vph_pwr>;
563 regulator-name = "vreg_s4c";
564 regulator-min-microvolt = <1856000>;
565 regulator-max-microvolt = <2000000>;
566 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
570 regulator-name = "vreg_l1c";
571 regulator-min-microvolt = <1200000>;
572 regulator-max-microvolt = <1200000>;
573 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
577 regulator-name = "vreg_l2c";
578 regulator-min-microvolt = <880000>;
579 regulator-max-microvolt = <920000>;
580 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
584 regulator-name = "vreg_l3c";
585 regulator-min-microvolt = <912000>;
586 regulator-max-microvolt = <920000>;
587 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
591 regulators-2 {
592 compatible = "qcom,pmc8380-rpmh-regulators";
593 qcom,pmic-id = "d";
595 vdd-l1-supply = <&vreg_s1f>;
596 vdd-l2-supply = <&vreg_s1f>;
597 vdd-l3-supply = <&vreg_s4c>;
598 vdd-s1-supply = <&vph_pwr>;
601 regulator-name = "vreg_l1d";
602 regulator-min-microvolt = <880000>;
603 regulator-max-microvolt = <920000>;
604 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
608 regulator-name = "vreg_l2d";
609 regulator-min-microvolt = <912000>;
610 regulator-max-microvolt = <920000>;
611 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
615 regulator-name = "vreg_l3d";
616 regulator-min-microvolt = <1800000>;
617 regulator-max-microvolt = <1800000>;
618 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
622 regulators-3 {
623 compatible = "qcom,pmc8380-rpmh-regulators";
624 qcom,pmic-id = "e";
626 vdd-l2-supply = <&vreg_s1f>;
627 vdd-l3-supply = <&vreg_s5j>;
630 regulator-name = "vreg_l2e";
631 regulator-min-microvolt = <880000>;
632 regulator-max-microvolt = <920000>;
633 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
637 regulator-name = "vreg_l3e";
638 regulator-min-microvolt = <1200000>;
639 regulator-max-microvolt = <1200000>;
640 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
644 regulators-4 {
645 compatible = "qcom,pmc8380-rpmh-regulators";
646 qcom,pmic-id = "f";
648 vdd-l1-supply = <&vreg_s5j>;
649 vdd-l2-supply = <&vreg_s5j>;
650 vdd-l3-supply = <&vreg_s5j>;
651 vdd-s1-supply = <&vph_pwr>;
654 regulator-name = "vreg_s1f";
655 regulator-min-microvolt = <700000>;
656 regulator-max-microvolt = <1100000>;
657 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
661 regulator-name = "vreg_l1f";
662 regulator-min-microvolt = <1024000>;
663 regulator-max-microvolt = <1024000>;
664 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
668 regulator-name = "vreg_l2f";
669 regulator-min-microvolt = <1024000>;
670 regulator-max-microvolt = <1024000>;
671 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
675 regulator-name = "vreg_l3f";
676 regulator-min-microvolt = <1024000>;
677 regulator-max-microvolt = <1024000>;
678 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
682 regulators-6 {
683 compatible = "qcom,pm8550ve-rpmh-regulators";
684 qcom,pmic-id = "i";
686 vdd-l1-supply = <&vreg_s4c>;
687 vdd-l2-supply = <&vreg_s5j>;
688 vdd-l3-supply = <&vreg_s1f>;
689 vdd-s1-supply = <&vph_pwr>;
690 vdd-s2-supply = <&vph_pwr>;
693 regulator-name = "vreg_s1i";
694 regulator-min-microvolt = <900000>;
695 regulator-max-microvolt = <920000>;
696 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
700 regulator-name = "vreg_s2i";
701 regulator-min-microvolt = <1000000>;
702 regulator-max-microvolt = <1100000>;
703 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
707 regulator-name = "vreg_l1i";
708 regulator-min-microvolt = <1800000>;
709 regulator-max-microvolt = <1800000>;
710 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
714 regulator-name = "vreg_l2i";
715 regulator-min-microvolt = <1200000>;
716 regulator-max-microvolt = <1200000>;
717 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
721 regulator-name = "vreg_l3i";
722 regulator-min-microvolt = <880000>;
723 regulator-max-microvolt = <920000>;
724 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
728 regulators-7 {
729 compatible = "qcom,pm8550ve-rpmh-regulators";
730 qcom,pmic-id = "j";
732 vdd-l1-supply = <&vreg_s1f>;
733 vdd-l2-supply = <&vreg_s5j>;
734 vdd-l3-supply = <&vreg_s1f>;
735 vdd-s5-supply = <&vph_pwr>;
738 regulator-name = "vreg_s5j";
739 regulator-min-microvolt = <1256000>;
740 regulator-max-microvolt = <1304000>;
741 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
745 regulator-name = "vreg_l1j";
746 regulator-min-microvolt = <912000>;
747 regulator-max-microvolt = <920000>;
748 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
752 regulator-name = "vreg_l2j";
753 regulator-min-microvolt = <1256000>;
754 regulator-max-microvolt = <1256000>;
755 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
759 regulator-name = "vreg_l3j";
760 regulator-min-microvolt = <880000>;
761 regulator-max-microvolt = <920000>;
762 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
770 zap-shader {
771 memory-region = <&gpu_microcode_mem>;
772 firmware-name = "qcom/x1e80100/microsoft/qcdxkmsuc8380.mbn";
777 clock-frequency = <100000>;
785 clock-frequency = <400000>;
789 /* Left-side rear port */
790 typec-mux@8 {
794 reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
798 vdd-supply = <&vreg_rtmr0_1p15>;
799 vdd33-supply = <&vreg_rtmr0_3p3>;
800 vdd33-cap-supply = <&vreg_rtmr0_3p3>;
801 vddar-supply = <&vreg_rtmr0_1p15>;
802 vddat-supply = <&vreg_rtmr0_1p15>;
803 vddio-supply = <&vreg_rtmr0_1p8>;
805 pinctrl-0 = <&rtmr0_default>;
806 pinctrl-names = "default";
808 retimer-switch;
809 orientation-switch;
812 #address-cells = <1>;
813 #size-cells = <0>;
819 remote-endpoint = <&pmic_glink_ss0_ss_in>;
827 remote-endpoint = <&usb_1_ss0_qmpphy_out>;
835 remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
844 clock-frequency = <400000>;
852 clock-frequency = <400000>;
860 reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
862 vdd3v3-supply = <&vreg_l13b>;
863 vdd1v8-supply = <&vreg_l4b>;
865 #phy-cells = <0>;
870 clock-frequency = <400000>;
874 /* Left-side front port */
875 typec-mux@8 {
879 reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
883 vdd-supply = <&vreg_rtmr1_1p15>;
884 vdd33-supply = <&vreg_rtmr1_3p3>;
885 vdd33-cap-supply = <&vreg_rtmr1_3p3>;
886 vddar-supply = <&vreg_rtmr1_1p15>;
887 vddat-supply = <&vreg_rtmr1_1p15>;
888 vddio-supply = <&vreg_rtmr1_1p8>;
890 retimer-switch;
891 orientation-switch;
894 #address-cells = <1>;
895 #size-cells = <0>;
901 remote-endpoint = <&pmic_glink_ss1_ss_in>;
909 remote-endpoint = <&usb_1_ss1_qmpphy_out>;
917 remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
925 spkr_01_sd_n_active: spkr-01-sd-n-active-state {
928 drive-strength = <16>;
929 bias-disable;
930 output-low;
935 qcom,dmic-sample-rate = <4800000>;
937 vdd-micb-supply = <&vreg_l1b>;
939 pinctrl-0 = <&dmic01_default>;
940 pinctrl-names = "default";
952 data-lanes = <0 1>;
953 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
961 data-lanes = <0 1>;
962 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
966 /delete-property/ #sound-dai-cells;
970 aux-bus {
972 compatible = "edp-panel";
975 power-supply = <&vreg_edp_3p3>;
979 remote-endpoint = <&mdss_dp3_out>;
990 data-lanes = <0 1 2 3>;
991 link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
993 remote-endpoint = <&edp_panel_in>;
1000 vdda-phy-supply = <&vreg_l3j>;
1001 vdda-pll-supply = <&vreg_l2j>;
1007 perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
1008 wake-gpios = <&tlmm 145 GPIO_ACTIVE_HIGH>;
1010 pinctrl-0 = <&pcie3_default>;
1011 pinctrl-names = "default";
1014 max-link-speed = <1>;
1019 vdda-phy-supply = <&vreg_l3c>;
1020 vdda-pll-supply = <&vreg_l3e>;
1030 vdda-phy-supply = <&vreg_l3i>;
1031 vdda-pll-supply = <&vreg_l3e>;
1037 perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
1038 wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
1040 vddpe-3v3-supply = <&vreg_nvme>;
1042 pinctrl-0 = <&pcie6a_default>;
1043 pinctrl-names = "default";
1049 vdda-phy-supply = <&vreg_l1d>;
1050 vdda-pll-supply = <&vreg_l2j>;
1056 rtmr0_default: rtmr0-reset-n-active-state {
1059 power-source = <1>; /* 1.8V */
1062 rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state {
1065 power-source = <1>; /* 1.8V */
1070 rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
1073 power-source = <1>; /* 1.8V */
1078 edp_bl_en: edp-bl-en-state {
1081 power-source = <1>; /* 1.8V */
1082 input-disable;
1083 output-enable;
1088 rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state {
1091 power-source = <1>; /* 1.8V */
1100 edp_bl_pwm: edp-bl-pwm-state {
1119 firmware-name = "qcom/x1e80100/microsoft/Romulus/qcadsp8380.mbn",
1126 firmware-name = "qcom/x1e80100/microsoft/Romulus/qccdsp8380.mbn",
1137 vdd18-supply = <&vreg_l3d>;
1138 vdd3-supply = <&vreg_l2b>;
1146 vdd18-supply = <&vreg_l3d>;
1147 vdd3-supply = <&vreg_l14b>;
1155 vdd18-supply = <&vreg_l3d>;
1156 vdd3-supply = <&vreg_l8b>;
1160 pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
1161 pinctrl-names = "default";
1169 reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
1170 #sound-dai-cells = <0>;
1171 sound-name-prefix = "SpkrLeft";
1172 vdd-1p8-supply = <&vreg_l15b>;
1173 vdd-io-supply = <&vreg_l12b>;
1174 qcom,port-mapping = <1 2 3 7 10 13>;
1181 reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
1182 #sound-dai-cells = <0>;
1183 sound-name-prefix = "SpkrRight";
1184 vdd-1p8-supply = <&vreg_l15b>;
1185 vdd-io-supply = <&vreg_l12b>;
1186 qcom,port-mapping = <4 5 6 7 11 13>;
1197 qcom,rx-port-mapping = <1 2 3 4 5>;
1208 qcom,tx-port-mapping = <2 2 3 4>;
1213 gpio-reserved-ranges = <44 4>, /* SPI (TPM) */
1216 hall_int_n_default: hall-int-n-state {
1219 bias-disable;
1222 nvme_reg_en: nvme-reg-en-state {
1225 drive-strength = <2>;
1226 bias-disable;
1229 edp_reg_en: edp-reg-en-state {
1232 drive-strength = <16>;
1233 bias-disable;
1236 ssam_state: ssam-state-state {
1239 bias-disable;
1242 pcie3_default: pcie3-default-state {
1243 perst-n-pins {
1246 drive-strength = <2>;
1247 bias-disable;
1250 clkreq-n-pins {
1253 drive-strength = <2>;
1254 bias-pull-up;
1257 wake-n-pins {
1260 drive-strength = <2>;
1261 bias-pull-up;
1265 pcie6a_default: pcie6a-default-state {
1266 perst-n-pins {
1269 drive-strength = <2>;
1270 bias-disable;
1273 clkreq-n-pins {
1276 drive-strength = <2>;
1277 bias-pull-up;
1280 wake-n-pins {
1283 drive-strength = <2>;
1284 bias-pull-up;
1288 rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
1291 drive-strength = <2>;
1292 bias-disable;
1295 rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
1298 drive-strength = <2>;
1299 bias-disable;
1302 rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
1305 drive-strength = <2>;
1306 bias-disable;
1309 wcd_default: wcd-reset-n-active-state {
1312 drive-strength = <16>;
1313 bias-disable;
1314 output-low;
1317 cam_indicator_en: cam-indicator-en-state {
1320 drive-strength = <2>;
1321 bias-disable;
1328 embedded-controller {
1329 compatible = "microsoft,surface-sam";
1331 interrupts-extended = <&tlmm 91 IRQ_TYPE_EDGE_RISING>;
1333 current-speed = <4000000>;
1335 pinctrl-0 = <&ssam_state>;
1336 pinctrl-names = "default";
1341 vdd-supply = <&vreg_l3j>;
1342 vdda12-supply = <&vreg_l2j>;
1350 vdda-phy-supply = <&vreg_l2j>;
1351 vdda-pll-supply = <&vreg_l1j>;
1365 remote-endpoint = <&pmic_glink_ss0_hs_in>;
1369 remote-endpoint = <&retimer_ss0_ss_in>;
1373 vdd-supply = <&vreg_l3j>;
1374 vdda12-supply = <&vreg_l2j>;
1382 vdda-phy-supply = <&vreg_l2j>;
1383 vdda-pll-supply = <&vreg_l2d>;
1397 remote-endpoint = <&pmic_glink_ss1_hs_in>;
1401 remote-endpoint = <&retimer_ss1_ss_in>;
1404 /* MP0 goes to the Surface Connector, MP1 goes to the USB-A port */
1410 vdd-supply = <&vreg_l2e>;
1411 vdda12-supply = <&vreg_l2j>;
1419 vdd-supply = <&vreg_l2e>;
1420 vdda12-supply = <&vreg_l2j>;
1428 vdda-phy-supply = <&vreg_l3e>;
1429 vdda-pll-supply = <&vreg_l3c>;
1435 vdda-phy-supply = <&vreg_l3e>;
1436 vdda-pll-supply = <&vreg_l3c>;