Lines Matching +full:vdd18 +full:- +full:supply
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
21 compatible = "qcom,sm8650-mtp", "qcom,sm8650";
28 stdout-path = "serial0:115200n8";
31 pmic-glink {
32 compatible = "qcom,sm8650-pmic-glink",
33 "qcom,sm8550-pmic-glink",
34 "qcom,pmic-glink";
35 #address-cells = <1>;
36 #size-cells = <0>;
37 orientation-gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
40 compatible = "usb-c-connector";
43 power-role = "dual";
44 data-role = "dual";
47 #address-cells = <1>;
48 #size-cells = <0>;
54 remote-endpoint = <&usb_1_dwc3_hs>;
62 remote-endpoint = <&usb_dp_qmpphy_out>;
70 compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard";
71 model = "SM8650-MTP";
72 audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
75 wsa-dai-link {
76 link-name = "WSA Playback";
79 sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
83 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
87 sound-dai = <&q6apm>;
92 vph_pwr: vph-pwr-regulator {
93 compatible = "regulator-fixed";
95 regulator-name = "vph_pwr";
96 regulator-min-microvolt = <3700000>;
97 regulator-max-microvolt = <3700000>;
99 regulator-always-on;
100 regulator-boot-on;
105 regulators-0 {
106 compatible = "qcom,pm8550-rpmh-regulators";
108 vdd-bob1-supply = <&vph_pwr>;
109 vdd-bob2-supply = <&vph_pwr>;
110 vdd-l2-l13-l14-supply = <&vreg_bob1>;
111 vdd-l3-supply = <&vreg_s1c_1p2>;
112 vdd-l5-l16-supply = <&vreg_bob1>;
113 vdd-l6-l7-supply = <&vreg_bob1>;
114 vdd-l8-l9-supply = <&vreg_bob1>;
115 vdd-l11-supply = <&vreg_s1c_1p2>;
116 vdd-l12-supply = <&vreg_s6c_1p8>;
117 vdd-l15-supply = <&vreg_s6c_1p8>;
118 vdd-l17-supply = <&vreg_bob2>;
120 qcom,pmic-id = "b";
123 regulator-name = "vreg_bob1";
124 regulator-min-microvolt = <3296000>;
125 regulator-max-microvolt = <3960000>;
126 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
130 regulator-name = "vreg_bob2";
131 regulator-min-microvolt = <2720000>;
132 regulator-max-microvolt = <3008000>;
133 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
137 regulator-name = "vreg_l2b_3p0";
138 regulator-min-microvolt = <3008000>;
139 regulator-max-microvolt = <3008000>;
140 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
141 regulator-allow-set-load;
142 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
147 regulator-name = "vreg_l5b_3p1";
148 regulator-min-microvolt = <3104000>;
149 regulator-max-microvolt = <3104000>;
150 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
151 regulator-allow-set-load;
152 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
157 regulator-name = "vreg_l6b_1p8";
158 regulator-min-microvolt = <1800000>;
159 regulator-max-microvolt = <3008000>;
160 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
161 regulator-allow-set-load;
162 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
167 regulator-name = "vreg_l7b_1p8";
168 regulator-min-microvolt = <1800000>;
169 regulator-max-microvolt = <3008000>;
170 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
174 regulator-name = "vreg_l8b_1p8";
175 regulator-min-microvolt = <1800000>;
176 regulator-max-microvolt = <3008000>;
177 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
178 regulator-allow-set-load;
179 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
184 regulator-name = "vreg_l9b_2p9";
185 regulator-min-microvolt = <2960000>;
186 regulator-max-microvolt = <3008000>;
187 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
188 regulator-allow-set-load;
189 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
194 regulator-name = "vreg_l11b_1p2";
195 regulator-min-microvolt = <1200000>;
196 regulator-max-microvolt = <1504000>;
197 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
198 regulator-allow-set-load;
199 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
204 regulator-name = "vreg_l12b_1p8";
205 regulator-min-microvolt = <1800000>;
206 regulator-max-microvolt = <1800000>;
207 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
208 regulator-allow-set-load;
209 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
214 regulator-name = "vreg_l13b_3p0";
215 regulator-min-microvolt = <3000000>;
216 regulator-max-microvolt = <3000000>;
217 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218 regulator-allow-set-load;
219 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
224 regulator-name = "vreg_l14b_3p2";
225 regulator-min-microvolt = <3200000>;
226 regulator-max-microvolt = <3200000>;
227 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
228 regulator-allow-set-load;
229 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
234 regulator-name = "vreg_l15b_1p8";
235 regulator-min-microvolt = <1800000>;
236 regulator-max-microvolt = <1800000>;
237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
238 regulator-allow-set-load;
239 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
244 regulator-name = "vreg_l16b_2p8";
245 regulator-min-microvolt = <2800000>;
246 regulator-max-microvolt = <2800000>;
247 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
248 regulator-allow-set-load;
249 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
254 regulator-name = "vreg_l17b_2p5";
255 regulator-min-microvolt = <2504000>;
256 regulator-max-microvolt = <2504000>;
257 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
258 regulator-allow-set-load;
259 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
264 regulators-1 {
265 compatible = "qcom,pm8550vs-rpmh-regulators";
267 vdd-l1-supply = <&vreg_s1c_1p2>;
268 vdd-l2-supply = <&vreg_s1c_1p2>;
269 vdd-l3-supply = <&vreg_s1c_1p2>;
270 vdd-s1-supply = <&vph_pwr>;
271 vdd-s2-supply = <&vph_pwr>;
272 vdd-s3-supply = <&vph_pwr>;
273 vdd-s4-supply = <&vph_pwr>;
274 vdd-s5-supply = <&vph_pwr>;
275 vdd-s6-supply = <&vph_pwr>;
277 qcom,pmic-id = "c";
280 regulator-name = "vreg_s1c_1p2";
281 regulator-min-microvolt = <1256000>;
282 regulator-max-microvolt = <1348000>;
283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
287 regulator-name = "vreg_s2c_0p8";
288 regulator-min-microvolt = <852000>;
289 regulator-max-microvolt = <1036000>;
290 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
294 regulator-name = "vreg_s3c_0p9";
295 regulator-min-microvolt = <976000>;
296 regulator-max-microvolt = <1064000>;
297 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
301 regulator-name = "vreg_s4c_1p2";
302 regulator-min-microvolt = <1224000>;
303 regulator-max-microvolt = <1280000>;
304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 regulator-name = "vreg_s5c_0p7";
309 regulator-min-microvolt = <752000>;
310 regulator-max-microvolt = <900000>;
311 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
315 regulator-name = "vreg_s6c_1p8";
316 regulator-min-microvolt = <1856000>;
317 regulator-max-microvolt = <2000000>;
318 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
322 regulator-name = "vreg_l1c_1p2";
323 regulator-min-microvolt = <1200000>;
324 regulator-max-microvolt = <1200000>;
325 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
326 regulator-allow-set-load;
327 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
332 regulator-name = "vreg_l3c_1p2";
333 regulator-min-microvolt = <1200000>;
334 regulator-max-microvolt = <1200000>;
335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
336 regulator-allow-set-load;
337 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
342 regulators-2 {
343 compatible = "qcom,pm8550vs-rpmh-regulators";
345 vdd-l1-supply = <&vreg_s3c_0p9>;
347 qcom,pmic-id = "d";
350 regulator-name = "vreg_l1d_0p88";
351 regulator-min-microvolt = <912000>;
352 regulator-max-microvolt = <920000>;
353 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
354 regulator-allow-set-load;
355 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
360 regulators-3 {
361 compatible = "qcom,pm8550vs-rpmh-regulators";
363 vdd-l3-supply = <&vreg_s3c_0p9>;
365 qcom,pmic-id = "e";
368 regulator-name = "vreg_l3e_0p9";
369 regulator-min-microvolt = <880000>;
370 regulator-max-microvolt = <920000>;
371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
372 regulator-allow-set-load;
373 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
378 regulators-4 {
379 compatible = "qcom,pm8550vs-rpmh-regulators";
381 vdd-l1-supply = <&vreg_s3c_0p9>;
382 vdd-l3-supply = <&vreg_s3c_0p9>;
384 qcom,pmic-id = "g";
387 regulator-name = "vreg_l1g_0p91";
388 regulator-min-microvolt = <912000>;
389 regulator-max-microvolt = <920000>;
390 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
391 regulator-allow-set-load;
392 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
397 regulator-name = "vreg_l3g_0p91";
398 regulator-min-microvolt = <880000>;
399 regulator-max-microvolt = <912000>;
400 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
401 regulator-allow-set-load;
402 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
407 regulators-5 {
408 compatible = "qcom,pm8550ve-rpmh-regulators";
410 vdd-l1-supply = <&vreg_s3c_0p9>;
411 vdd-l2-supply = <&vreg_s3c_0p9>;
412 vdd-l3-supply = <&vreg_s1c_1p2>;
413 vdd-s4-supply = <&vph_pwr>;
415 qcom,pmic-id = "i";
418 regulator-name = "vreg_s4i_0p85";
419 regulator-min-microvolt = <852000>;
420 regulator-max-microvolt = <1004000>;
421 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
425 regulator-name = "vreg_l1i_0p88";
426 regulator-min-microvolt = <880000>;
427 regulator-max-microvolt = <912000>;
428 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
429 regulator-allow-set-load;
430 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
435 regulator-name = "vreg_l2i_0p88";
436 regulator-min-microvolt = <880000>;
437 regulator-max-microvolt = <912000>;
438 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
439 regulator-allow-set-load;
440 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
445 regulator-name = "vreg_l3i_0p91";
446 regulator-min-microvolt = <1200000>;
447 regulator-max-microvolt = <1200000>;
448 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
449 regulator-allow-set-load;
450 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
455 regulators-6 {
456 compatible = "qcom,pm8010-rpmh-regulators";
457 qcom,pmic-id = "m";
459 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
460 vdd-l3-l4-supply = <&vreg_bob2>;
461 vdd-l5-supply = <&vreg_s6c_1p8>;
462 vdd-l6-supply = <&vreg_bob1>;
463 vdd-l7-supply = <&vreg_bob1>;
466 regulator-name = "vreg_l1m_1p1";
467 regulator-min-microvolt = <1104000>;
468 regulator-max-microvolt = <1104000>;
469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
470 regulator-allow-set-load;
471 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
476 regulator-name = "vreg_l2m_1p056";
477 regulator-min-microvolt = <1056000>;
478 regulator-max-microvolt = <1056000>;
479 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
480 regulator-allow-set-load;
481 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
486 regulator-name = "vreg_l3m_2p8";
487 regulator-min-microvolt = <2800000>;
488 regulator-max-microvolt = <2800000>;
489 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
493 regulator-name = "vreg_l4m_2p8";
494 regulator-min-microvolt = <2800000>;
495 regulator-max-microvolt = <2800000>;
496 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
500 regulator-name = "vreg_l5m_1p8";
501 regulator-min-microvolt = <1800000>;
502 regulator-max-microvolt = <1800000>;
503 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
507 regulator-name = "vreg_l6m_2p8";
508 regulator-min-microvolt = <2800000>;
509 regulator-max-microvolt = <2800000>;
510 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
514 regulator-name = "vreg_l7m_2p96";
515 regulator-min-microvolt = <2960000>;
516 regulator-max-microvolt = <2960000>;
517 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
521 regulators-7 {
522 compatible = "qcom,pm8010-rpmh-regulators";
523 qcom,pmic-id = "n";
525 vdd-l1-l2-supply = <&vreg_s1c_1p2>;
526 vdd-l3-l4-supply = <&vreg_s6c_1p8>;
527 vdd-l5-supply = <&vreg_bob2>;
528 vdd-l6-supply = <&vreg_bob2>;
529 vdd-l7-supply = <&vreg_bob1>;
532 regulator-name = "vreg_l1n_1p1";
533 regulator-min-microvolt = <1104000>;
534 regulator-max-microvolt = <1104000>;
535 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
536 regulator-allow-set-load;
537 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
542 regulator-name = "vreg_l2n_1p056";
543 regulator-min-microvolt = <1056000>;
544 regulator-max-microvolt = <1056000>;
545 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
546 regulator-allow-set-load;
547 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
552 regulator-name = "vreg_l3n_1p8";
553 regulator-min-microvolt = <1800000>;
554 regulator-max-microvolt = <1800000>;
555 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
559 regulator-name = "vreg_l4n_1p8";
560 regulator-min-microvolt = <1800000>;
561 regulator-max-microvolt = <1800000>;
562 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
566 regulator-name = "vreg_l5n_2p8";
567 regulator-min-microvolt = <2800000>;
568 regulator-max-microvolt = <2800000>;
569 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
573 regulator-name = "vreg_l6n_2p8";
574 regulator-min-microvolt = <2800000>;
575 regulator-max-microvolt = <2800000>;
576 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
580 regulator-name = "vreg_l7n_3p3";
581 regulator-min-microvolt = <3304000>;
582 regulator-max-microvolt = <3304000>;
583 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
593 spkr_1_sd_n_active: spkr-1-sd-n-active-state {
596 drive-strength = <16>;
597 bias-disable;
598 output-low;
607 vdda-supply = <&vreg_l3i_1p2>;
615 reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
617 vddio-supply = <&vreg_l12b_1p8>;
618 vci-supply = <&vreg_l13b_3p0>;
619 vdd-supply = <&vreg_l11b_1p2>;
621 pinctrl-0 = <&disp0_reset_n_active>, <&mdp_vsync_active>;
622 pinctrl-1 = <&disp0_reset_n_suspend>, <&mdp_vsync_suspend>;
623 pinctrl-names = "default", "sleep";
627 remote-endpoint = <&mdss_dsi0_out>;
634 remote-endpoint = <&panel0_in>;
635 data-lanes = <0 1 2 3>;
639 vdds-supply = <&vreg_l1i_0p88>;
645 wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
646 perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
648 pinctrl-0 = <&pcie0_default_state>;
649 pinctrl-names = "default";
655 vdda-phy-supply = <&vreg_l1i_0p88>;
656 vdda-pll-supply = <&vreg_l3i_1p2>;
662 wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;
663 perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>;
665 pinctrl-0 = <&pcie1_default_state>;
666 pinctrl-names = "default";
672 vdda-phy-supply = <&vreg_l3e_0p9>;
673 vdda-pll-supply = <&vreg_l3i_1p2>;
674 vdda-qref-supply = <&vreg_l1i_0p88>;
680 sdc2_card_det_n: sdc2-card-det-state {
683 bias-pull-up;
684 input-enable;
685 output-disable;
686 power-source = <1>; /* 1.8 V */
691 vdd18-supply = <&vreg_l15b_1p8>;
692 vdd3-supply = <&vreg_l5b_3p1>;
700 firmware-name = "qcom/sm8650/adsp.mbn",
707 firmware-name = "qcom/sm8650/cdsp.mbn",
714 firmware-name = "qcom/sm8650/modem.mbn",
721 cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>;
723 vmmc-supply = <&vreg_l9b_2p9>;
724 vqmmc-supply = <&vreg_l8b_1p8>;
725 bus-width = <4>;
726 no-sdio;
727 no-mmc;
729 pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
730 pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
731 pinctrl-names = "default", "sleep";
737 clock-frequency = <32000>;
747 pinctrl-0 = <&spkr_1_sd_n_active>;
748 pinctrl-names = "default";
749 powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>;
750 #sound-dai-cells = <0>;
751 sound-name-prefix = "SpkrLeft";
752 vdd-1p8-supply = <&vreg_l15b_1p8>;
753 vdd-io-supply = <&vreg_l3c_1p2>;
763 qcom,port-mapping = <1 2 3 7 10 13>;
770 pinctrl-0 = <&spkr_2_sd_n_active>;
771 pinctrl-names = "default";
772 powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
773 #sound-dai-cells = <0>;
774 sound-name-prefix = "SpkrRight";
775 vdd-1p8-supply = <&vreg_l15b_1p8>;
776 vdd-io-supply = <&vreg_l3c_1p2>;
786 qcom,port-mapping = <4 5 6 7 11 13>;
792 gpio-reserved-ranges = <32 8>, <74 1>;
794 disp0_reset_n_active: disp0-reset-n-active-state {
797 drive-strength = <8>;
798 bias-disable;
801 disp0_reset_n_suspend: disp0-reset-n-suspend-state {
804 drive-strength = <2>;
805 bias-pull-down;
808 mdp_vsync_active: mdp-vsync-active-state {
811 drive-strength = <2>;
812 bias-pull-down;
815 mdp_vsync_suspend: mdp-vsync-suspend-state {
818 drive-strength = <2>;
819 bias-pull-down;
822 spkr_2_sd_n_active: spkr-2-sd-n-active-state {
825 drive-strength = <16>;
826 bias-disable;
827 output-low;
836 reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
838 vcc-supply = <&vreg_l17b_2p5>;
839 vcc-max-microamp = <1300000>;
840 vccq-supply = <&vreg_l1c_1p2>;
841 vccq-max-microamp = <1200000>;
847 vdda-phy-supply = <&vreg_l1d_0p88>;
848 vdda-pll-supply = <&vreg_l3i_1p2>;
854 * DPAUX -> WCD9395 -> USB_SBU -> USB-C
855 * eUSB2 DP/DM -> PM85550HS -> eUSB2 DP/DM -> USB-C
856 * USB SS -> USB-C
865 usb-role-switch;
869 remote-endpoint = <&pmic_glink_hs_in>;
873 vdd-supply = <&vreg_l1i_0p88>;
874 vdda12-supply = <&vreg_l3i_1p2>;
882 vdda-phy-supply = <&vreg_l3i_1p2>;
883 vdda-pll-supply = <&vreg_l3g_0p91>;
889 remote-endpoint = <&pmic_glink_ss_in>;
893 clock-frequency = <76800000>;