Lines Matching +full:current +full:- +full:num +full:- +full:sinks
1 // SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
6 /dts-v1/;
8 #include <dt-bindings/arm/qcom,ids.h>
9 #include <dt-bindings/phy/phy.h>
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
21 /delete-node/ &adsp_mem;
22 /delete-node/ &cdsp_secure_heap;
23 /delete-node/ &slpi_mem;
24 /delete-node/ &spss_mem;
25 /delete-node/ &xbl_aop_mem;
32 chassis-type = "tablet";
35 qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
36 qcom,board-id = <0x34 0>;
39 #address-cells = <2>;
40 #size-cells = <2>;
44 compatible = "simple-framebuffer";
53 battery_l: battery-l {
54 compatible = "simple-battery";
55 voltage-min-design-microvolt = <3870000>;
56 energy-full-design-microwatt-hours = <16700000>;
57 charge-full-design-microamp-hours = <4420000>;
60 battery_r: battery-r {
61 compatible = "simple-battery";
62 voltage-min-design-microvolt = <3870000>;
63 energy-full-design-microwatt-hours = <16700000>;
64 charge-full-design-microamp-hours = <4420000>;
67 bl_vddpos_5p5: bl-vddpos-regulator {
68 compatible = "regulator-fixed";
69 regulator-name = "bl_vddpos_5p5";
70 regulator-min-microvolt = <5500000>;
71 regulator-max-microvolt = <5500000>;
72 regulator-enable-ramp-delay = <233>;
74 enable-active-high;
75 regulator-boot-on;
78 bl_vddneg_5p5: bl-vddneg-regulator {
79 compatible = "regulator-fixed";
80 regulator-name = "bl_vddneg_5p5";
81 regulator-min-microvolt = <5500000>;
82 regulator-max-microvolt = <5500000>;
83 regulator-enable-ramp-delay = <233>;
85 enable-active-high;
86 regulator-boot-on;
89 gpio_keys: gpio-keys {
90 compatible = "gpio-keys";
92 pinctrl-0 = <&vol_up_n>;
93 pinctrl-names = "default";
95 key-vol-up {
99 debounce-interval = <15>;
100 linux,can-disable;
101 wakeup-source;
105 vph_pwr: vph-pwr-regulator {
106 compatible = "regulator-fixed";
107 regulator-name = "vph_pwr";
108 regulator-min-microvolt = <3700000>;
109 regulator-max-microvolt = <3700000>;
113 vreg_s6c_0p88: smpc6-regulator {
114 compatible = "regulator-fixed";
115 regulator-name = "vreg_s6c_0p88";
116 regulator-min-microvolt = <880000>;
117 regulator-max-microvolt = <880000>;
118 regulator-always-on;
119 vin-supply = <&vph_pwr>;
122 reserved-memory {
123 xbl_aop_mem: xbl-aop@80700000 {
125 no-map;
130 no-map;
135 no-map;
140 no-map;
143 cdsp_secure_heap: cdsp-secure-heap@8e100000 {
145 no-map;
148 cont_splash_mem: cont-splash@9c000000 {
150 no-map;
156 record-size = <0x1000>;
157 console-size = <0x200000>;
158 ecc-size = <16>;
159 no-map;
165 firmware-name = "qcom/sm8250/xiaomi/pipa/adsp.mbn";
170 regulators-0 {
171 compatible = "qcom,pm8150-rpmh-regulators";
172 qcom,pmic-id = "a";
174 vdd-s1-supply = <&vph_pwr>;
175 vdd-s2-supply = <&vph_pwr>;
176 vdd-s3-supply = <&vph_pwr>;
177 vdd-s4-supply = <&vph_pwr>;
178 vdd-s5-supply = <&vph_pwr>;
179 vdd-s6-supply = <&vph_pwr>;
180 vdd-s7-supply = <&vph_pwr>;
181 vdd-s8-supply = <&vph_pwr>;
182 vdd-s9-supply = <&vph_pwr>;
183 vdd-s10-supply = <&vph_pwr>;
184 vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
185 vdd-l2-l10-supply = <&vreg_bob>;
186 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
187 vdd-l6-l9-supply = <&vreg_s8c_1p35>;
188 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
189 vdd-l13-l16-l17-supply = <&vreg_bob>;
191 /* (S1+S2+S3) - cx.lvl (ARC) */
194 regulator-name = "vreg_s4a_1p8";
195 regulator-min-microvolt = <1800000>;
196 regulator-max-microvolt = <1920000>;
197 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
198 regulator-allow-set-load;
199 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
204 regulator-name = "vreg_s5a_1p9";
205 regulator-min-microvolt = <1900000>;
206 regulator-max-microvolt = <2040000>;
207 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
211 regulator-name = "vreg_s6a_0p95";
212 regulator-min-microvolt = <600000>;
213 regulator-max-microvolt = <1128000>;
214 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218 regulator-name = "vreg_l2a_3p1";
219 regulator-min-microvolt = <3072000>;
220 regulator-max-microvolt = <3072000>;
221 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
225 regulator-name = "vreg_l3a_0p9";
226 regulator-min-microvolt = <928000>;
227 regulator-max-microvolt = <932000>;
228 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
231 /* L4 - lmx.lvl (ARC) */
234 regulator-name = "vreg_l5a_0p88";
235 regulator-min-microvolt = <880000>;
236 regulator-max-microvolt = <880000>;
237 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
241 regulator-name = "vreg_l6a_1p2";
242 regulator-min-microvolt = <1200000>;
243 regulator-max-microvolt = <1200000>;
244 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245 regulator-allow-set-load;
246 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
253 regulator-name = "vreg_l9a_1p2";
254 regulator-min-microvolt = <1200000>;
255 regulator-max-microvolt = <1200000>;
256 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
259 /* L10 is unused, L11 - lcx.lvl (ARC) */
262 regulator-name = "vreg_l12a_1p8";
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <1800000>;
265 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
271 regulator-name = "vreg_l14a_1p88";
272 regulator-min-microvolt = <1880000>;
273 regulator-max-microvolt = <1880000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
280 regulator-name = "vreg_l17a_3p0";
281 regulator-min-microvolt = <2496000>;
282 regulator-max-microvolt = <3008000>;
283 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
284 regulator-allow-set-load;
285 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
290 regulator-name = "vreg_l18a_0p9";
291 regulator-min-microvolt = <800000>;
292 regulator-max-microvolt = <920000>;
293 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
297 regulators-1 {
298 compatible = "qcom,pm8150l-rpmh-regulators";
299 qcom,pmic-id = "c";
301 vdd-s1-supply = <&vph_pwr>;
302 vdd-s2-supply = <&vph_pwr>;
303 vdd-s3-supply = <&vph_pwr>;
304 vdd-s4-supply = <&vph_pwr>;
305 vdd-s5-supply = <&vph_pwr>;
306 vdd-s6-supply = <&vph_pwr>;
307 vdd-s7-supply = <&vph_pwr>;
308 vdd-s8-supply = <&vph_pwr>;
309 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
310 vdd-l2-l3-supply = <&vreg_s8c_1p35>;
311 vdd-l4-l5-l6-supply = <&vreg_bob>;
312 vdd-l7-l11-supply = <&vreg_bob>;
313 vdd-l9-l10-supply = <&vreg_bob>;
314 vdd-bob-supply = <&vph_pwr>;
317 regulator-name = "vreg_bob";
318 regulator-min-microvolt = <3350000>;
319 regulator-max-microvolt = <3960000>;
320 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
324 * S1-S6 are ARCs:
325 * (S1+S2) - gfx.lvl,
326 * S3 - mx.lvl,
327 * (S4+S5) - mmcx.lvl,
328 * S6 - ebi.lvl
332 regulator-name = "vreg_s7c_0p35";
333 regulator-min-microvolt = <348000>;
334 regulator-max-microvolt = <1000000>;
335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
339 regulator-name = "vreg_s8c_1p35";
340 regulator-min-microvolt = <1200000>;
341 regulator-max-microvolt = <1400000>;
342 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
346 regulator-name = "vreg_l1c_1p8";
347 regulator-min-microvolt = <1800000>;
348 regulator-max-microvolt = <1800000>;
349 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
352 /* L2-4 are unused. */
355 regulator-name = "vreg_l5c_1p8";
356 regulator-min-microvolt = <1800000>;
357 regulator-max-microvolt = <2800000>;
358 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
362 regulator-name = "vreg_l6c_2p9";
363 regulator-min-microvolt = <1800000>;
364 regulator-max-microvolt = <2960000>;
365 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
366 regulator-allow-set-load;
367 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
372 regulator-name = "vreg_l7c_2p85";
373 regulator-min-microvolt = <2856000>;
374 regulator-max-microvolt = <3104000>;
375 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
379 regulator-name = "vreg_l8c_1p8";
380 regulator-min-microvolt = <1800000>;
381 regulator-max-microvolt = <1800000>;
382 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
386 regulator-name = "vreg_l9c_2p9";
387 regulator-min-microvolt = <2704000>;
388 regulator-max-microvolt = <2960000>;
389 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
390 regulator-allow-set-load;
391 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
396 regulator-name = "vreg_l10c_3p3";
397 regulator-min-microvolt = <3000000>;
398 regulator-max-microvolt = <3312000>;
399 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
403 regulator-name = "vreg_l11c_3p0";
404 regulator-min-microvolt = <3104000>;
405 regulator-max-microvolt = <3304000>;
406 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
410 regulators-2 {
411 compatible = "qcom,pm8009-rpmh-regulators";
412 qcom,pmic-id = "f";
414 vdd-s1-supply = <&vph_pwr>;
415 vdd-s2-supply = <&vreg_bob>;
416 vdd-l2-supply = <&vreg_s8c_1p35>;
417 vdd-l5-l6-supply = <&vreg_bob>;
418 vdd-l7-supply = <&vreg_s4a_1p8>;
421 regulator-name = "vreg_s1f_1p2";
422 regulator-min-microvolt = <1200000>;
423 regulator-max-microvolt = <1300000>;
424 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
428 regulator-name = "vreg_s2f_0p5";
429 regulator-min-microvolt = <512000>;
430 regulator-max-microvolt = <1100000>;
431 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
437 regulator-name = "vreg_l2f_1p3";
438 regulator-min-microvolt = <1056000>;
439 regulator-max-microvolt = <1200000>;
440 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
446 regulator-name = "vreg_l5f_2p85";
447 regulator-min-microvolt = <2800000>;
448 regulator-max-microvolt = <3000000>;
449 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
453 regulator-name = "vreg_l6f_2p8";
454 regulator-min-microvolt = <2800000>;
455 regulator-max-microvolt = <3000000>;
456 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
460 regulator-name = "vreg_l7f_1p8";
461 regulator-min-microvolt = <1800000>;
462 regulator-max-microvolt = <1800000>;
463 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
469 firmware-name = "qcom/sm8250/xiaomi/pipa/cdsp.mbn";
492 zap-shader {
493 memory-region = <&gpu_mem>;
494 firmware-name = "qcom/sm8250/xiaomi/pipa/a650_zap.mbn";
499 clock-frequency = <400000>;
502 fuel-gauge@55 {
505 monitored-battery = <&battery_r>;
510 clock-frequency = <400000>;
516 vddpos-supply = <&bl_vddpos_5p5>;
517 vddneg-supply = <&bl_vddneg_5p5>;
518 enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
519 current-num-sinks = <5>;
520 kinetic,current-ramp-delay-ms = <128>;
521 kinetic,led-enable-ramp-delay-ms = <1>;
522 kinetic,enable-lcd-bias;
527 clock-frequency = <400000>;
530 fuel-gauge@55 {
533 monitored-battery = <&battery_l>;
542 vdda-phy-supply = <&vreg_l5a_0p88>;
543 vdda-pll-supply = <&vreg_l9a_1p2>;
548 vol_up_n: vol-up-n-state {
551 power-source = <1>;
552 input-enable;
553 bias-pull-up;
579 firmware-name = "qcom/sm8250/xiaomi/pipa/slpi.mbn";
592 vdda-pll-supply = <&vreg_l5a_0p88>;
593 vdda18-supply = <&vreg_l12a_1p8>;
594 vdda33-supply = <&vreg_l2a_3p1>;
600 vdda-phy-supply = <&vreg_l9a_1p2>;
601 vdda-pll-supply = <&vreg_l18a_0p9>;
605 vcc-supply = <&vreg_l17a_3p0>;
606 vcc-max-microamp = <800000>;
607 vccq-supply = <&vreg_l6a_1p2>;
608 vccq-max-microamp = <800000>;
609 vccq2-supply = <&vreg_s4a_1p8>;
610 vccq2-max-microamp = <800000>;
615 vdda-phy-supply = <&vreg_l5a_0p88>;
616 vdda-pll-supply = <&vreg_l9a_1p2>;
621 firmware-name = "qcom/sm8250/xiaomi/pipa/venus.mbn";