Lines Matching +full:gsi +full:- +full:loader
1 // SPDX-License-Identifier: BSD-3-Clause
7 /dts-v1/;
9 #include <dt-bindings/arm/qcom,ids.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
12 #include <dt-bindings/iio/qcom,spmi-adc7-pm8350b.h>
13 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
14 #include <dt-bindings/leds/common.h>
15 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
16 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
17 #include <dt-bindings/sound/qcom,q6afe.h>
18 #include <dt-bindings/sound/qcom,q6asm.h>
26 /delete-node/ &rmtfs_mem;
31 chassis-type = "handset";
41 #address-cells = <2>;
42 #size-cells = <2>;
45 stdout-path = "serial0:115200n8";
48 compatible = "simple-framebuffer";
61 power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
65 gpio-keys {
66 compatible = "gpio-keys";
68 pinctrl-0 = <&kypd_volp_n>;
69 pinctrl-names = "default";
71 key-volume-up {
78 pmic-glink {
79 compatible = "qcom,sm7325-pmic-glink",
80 "qcom,qcm6490-pmic-glink",
81 "qcom,pmic-glink";
83 #address-cells = <1>;
84 #size-cells = <0>;
86 orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
89 compatible = "usb-c-connector";
91 power-role = "dual";
92 data-role = "dual";
95 #address-cells = <1>;
96 #size-cells = <0>;
102 remote-endpoint = <&usb_1_dwc3_hs>;
110 remote-endpoint = <&fsa4480_sbu_mux>;
117 reserved-memory {
118 #address-cells = <2>;
119 #size-cells = <2>;
125 pmsg-size = <0x200000>;
126 mem-type = <2>;
127 console-size = <0x200000>;
132 no-map;
137 no-map;
140 cont_splash_mem: cont-splash@e1000000 {
142 no-map;
146 compatible = "qcom,rmtfs-mem";
148 no-map;
150 qcom,client-id = <1>;
156 thermal-zones {
157 camera-thermal {
158 polling-delay-passive = <0>;
159 thermal-sensors = <&pmk8350_adc_tm 2>;
162 active-config0 {
170 chg-skin-thermal {
171 polling-delay-passive = <0>;
172 thermal-sensors = <&pmk8350_adc_tm 6>;
175 active-config0 {
183 conn-thermal {
184 polling-delay-passive = <0>;
185 thermal-sensors = <&pmk8350_adc_tm 5>;
188 active-config0 {
196 quiet-thermal {
197 polling-delay-passive = <0>;
198 thermal-sensors = <&pmk8350_adc_tm 1>;
201 active-config0 {
209 rear-cam-thermal {
210 polling-delay-passive = <0>;
211 thermal-sensors = <&pmk8350_adc_tm 4>;
214 active-config0 {
222 sdm-skin-thermal {
223 polling-delay-passive = <0>;
224 thermal-sensors = <&pmk8350_adc_tm 3>;
227 active-config0 {
235 xo-thermal {
236 polling-delay-passive = <0>;
237 thermal-sensors = <&pmk8350_adc_tm 0>;
240 active-config0 {
249 vph_pwr: vph-pwr-regulator {
250 compatible = "regulator-fixed";
251 regulator-name = "vph_pwr";
252 regulator-min-microvolt = <3700000>;
253 regulator-max-microvolt = <3700000>;
256 vreg_cam_vio_1p8: regulator-cam-vio {
257 compatible = "regulator-fixed";
258 regulator-name = "vreg_cam_vio_1p8";
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <1800000>;
264 enable-active-high;
265 /* Always-on prevents CCI bus timeouts */
266 regulator-always-on;
268 vin-supply = <&vreg_bob>;
271 vreg_camf_vana_2p8: regulator-camf-vana {
272 compatible = "regulator-fixed";
273 regulator-name = "vreg_camf_vana_2p8";
275 regulator-min-microvolt = <2800000>;
276 regulator-max-microvolt = <2800000>;
279 enable-active-high;
281 vin-supply = <&vreg_bob>;
284 vreg_camf_vdig_1p1: regulator-camf-vdig {
285 compatible = "regulator-fixed";
286 regulator-name = "vreg_camf_vdig_1p1";
288 regulator-min-microvolt = <1100000>;
289 regulator-max-microvolt = <1100000>;
292 enable-active-high;
294 vin-supply = <&vreg_s8b_1p256>;
297 vreg_camu_vaf_1p8: regulator-camu-vaf {
298 compatible = "regulator-fixed";
299 regulator-name = "vreg_camu_vaf_1p8";
301 regulator-min-microvolt = <1800000>;
302 regulator-max-microvolt = <1800000>;
305 enable-active-high;
307 vin-supply = <&vreg_bob>;
310 vreg_camu_vana_2p8: regulator-camu-vana {
311 compatible = "regulator-fixed";
312 regulator-name = "vreg_camu_vana_2p8";
314 regulator-min-microvolt = <2800000>;
315 regulator-max-microvolt = <2800000>;
317 enable-active-high;
319 vin-supply = <&vreg_bob>;
322 vreg_camu_vdig_1p1: regulator-camu-vdig {
323 compatible = "regulator-fixed";
324 regulator-name = "vreg_camu_vdig_1p1";
326 regulator-min-microvolt = <1100000>;
327 regulator-max-microvolt = <1100000>;
330 enable-active-high;
332 vin-supply = <&vreg_s8b_1p256>;
335 vreg_camw_vaf_1p8: regulator-camw-vaf {
336 compatible = "regulator-fixed";
337 regulator-name = "vreg_camw_vaf_1p8";
339 regulator-min-microvolt = <1800000>;
340 regulator-max-microvolt = <1800000>;
343 enable-active-high;
345 vin-supply = <&vreg_bob>;
348 vreg_camw_vana_2p8: regulator-camw-vana {
349 compatible = "regulator-fixed";
350 regulator-name = "vreg_camw_vana_2p8";
352 regulator-min-microvolt = <2800000>;
353 regulator-max-microvolt = <2800000>;
356 enable-active-high;
358 vin-supply = <&vreg_bob>;
361 vreg_camw_vdig_1p1: regulator-camw-vdig {
362 compatible = "regulator-fixed";
363 regulator-name = "vreg_camw_vdig_1p1";
365 regulator-min-microvolt = <1100000>;
366 regulator-max-microvolt = <1100000>;
369 enable-active-high;
371 vin-supply = <&vreg_s8b_1p256>;
375 vreg_s2b_0p7: smpa3-regulator {
376 compatible = "regulator-fixed";
377 regulator-name = "vreg_s2b_0p7";
379 regulator-min-microvolt = <65535>;
380 regulator-max-microvolt = <65535>;
381 regulator-always-on;
382 vin-supply = <&vph_pwr>;
387 regulators-0 {
388 compatible = "qcom,pm7325-rpmh-regulators";
389 qcom,pmic-id = "b";
391 vdd-s1-supply = <&vph_pwr>;
392 vdd-s2-supply = <&vph_pwr>;
393 vdd-s7-supply = <&vph_pwr>;
394 vdd-s8-supply = <&vph_pwr>;
396 vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p952>;
397 vdd-l2-l7-supply = <&vreg_bob>;
398 vdd-l3-supply = <&vreg_s2b_0p7>;
399 vdd-l5-supply = <&vreg_s2b_0p7>;
400 vdd-l6-l9-l10-supply = <&vreg_s8b_1p256>;
401 vdd-l8-supply = <&vreg_s7b_0p952>;
402 vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p856>;
403 vdd-l13-supply = <&vreg_s7b_0p952>;
404 vdd-l14-l16-supply = <&vreg_s8b_1p256>;
407 * S2, L4-L5 are ARCs:
408 * S2 - ebi.lvl,
409 * L4 - lmx.lvl,
410 * l5 - lcx.lvl.
417 regulator-name = "vreg_s1b_1p856";
418 regulator-min-microvolt = <1840000>;
419 regulator-max-microvolt = <2040000>;
428 regulator-name = "vreg_s7b_0p952";
429 regulator-min-microvolt = <535000>;
430 regulator-max-microvolt = <1120000>;
435 regulator-name = "vreg_s8b_1p256";
436 regulator-min-microvolt = <1200000>;
437 regulator-max-microvolt = <1500000>;
438 regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
442 regulator-name = "vreg_l1b_0p912";
443 regulator-min-microvolt = <825000>;
444 regulator-max-microvolt = <925000>;
445 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
450 regulator-name = "vreg_l2b_3p072";
451 regulator-min-microvolt = <2700000>;
452 regulator-max-microvolt = <3544000>;
453 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
465 regulator-name = "vreg_l3b_0p6";
466 regulator-min-microvolt = <312000>;
467 regulator-max-microvolt = <910000>;
468 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
481 regulator-name = "vreg_l6b_1p2";
482 regulator-min-microvolt = <1140000>;
483 regulator-max-microvolt = <1260000>;
484 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
485 regulator-allow-set-load;
486 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
491 regulator-name = "vreg_l7b_2p96";
492 regulator-min-microvolt = <2400000>;
493 regulator-max-microvolt = <3544000>;
494 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
495 regulator-allow-set-load;
496 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
501 regulator-name = "vreg_l8b_0p904";
502 regulator-min-microvolt = <870000>;
503 regulator-max-microvolt = <970000>;
504 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
509 regulator-name = "vreg_l9b_1p2";
510 regulator-min-microvolt = <1200000>;
511 regulator-max-microvolt = <1304000>;
512 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
513 regulator-allow-set-load;
514 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
526 regulator-name = "vreg_l11b_1p776";
527 regulator-min-microvolt = <1504000>;
528 regulator-max-microvolt = <2000000>;
529 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
548 regulator-name = "vreg_l12b_0p8";
549 regulator-min-microvolt = <751000>;
550 regulator-max-microvolt = <824000>;
551 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
557 regulator-name = "vreg_l13b_0p8";
558 regulator-min-microvolt = <530000>;
559 regulator-max-microvolt = <824000>;
560 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
582 regulator-name = "vreg_l14b_1p2";
583 regulator-min-microvolt = <1080000>;
584 regulator-max-microvolt = <1304000>;
585 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
592 regulator-name = "vreg_l15b_0p88";
593 regulator-min-microvolt = <765000>;
594 regulator-max-microvolt = <1020000>;
595 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
599 regulator-name = "vreg_l16b_1p2";
600 regulator-min-microvolt = <1100000>;
601 regulator-max-microvolt = <1300000>;
602 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
607 regulator-name = "vreg_l17b_1p8";
608 regulator-min-microvolt = <1700000>;
609 regulator-max-microvolt = <1900000>;
610 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
619 regulator-name = "vreg_l18b_1p8";
620 regulator-min-microvolt = <1800000>;
621 regulator-max-microvolt = <2000000>;
622 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
635 regulator-name = "vreg_l19b_1p8";
636 regulator-min-microvolt = <1800000>;
637 regulator-max-microvolt = <2000000>;
638 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
642 regulators-1 {
643 compatible = "qcom,pm8350c-rpmh-regulators";
644 qcom,pmic-id = "c";
646 vdd-s1-supply = <&vph_pwr>;
647 vdd-s2-supply = <&vph_pwr>;
648 vdd-s5-supply = <&vph_pwr>;
649 vdd-s7-supply = <&vph_pwr>;
650 vdd-s9-supply = <&vph_pwr>;
651 vdd-s10-supply = <&vph_pwr>;
653 vdd-l1-l12-supply = <&vreg_s1b_1p856>;
654 vdd-l2-l8-supply = <&vreg_s1b_1p856>;
655 vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
656 vdd-l6-l9-l11-supply = <&vreg_bob>;
657 vdd-l10-supply = <&vreg_s7b_0p952>;
659 vdd-bob-supply = <&vph_pwr>;
663 * S2 - cx.lvl,
664 * S5 - mss.lvl,
665 * S7 - gfx.lvl,
666 * S10 - mx.lvl.
678 regulator-name = "vreg_s1c_2p2";
679 regulator-min-microvolt = <2190000>;
680 regulator-max-microvolt = <2210000>;
685 regulator-name = "vreg_s9c_0p676";
686 regulator-min-microvolt = <1010000>;
687 regulator-max-microvolt = <1170000>;
698 regulator-name = "vreg_l1c_1p8";
699 regulator-min-microvolt = <1800000>;
700 regulator-max-microvolt = <1980000>;
701 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
705 regulator-name = "vreg_l2c_1p8";
706 regulator-min-microvolt = <1620000>;
707 regulator-max-microvolt = <1980000>;
708 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
713 regulator-name = "vreg_l3c_3p0";
714 regulator-min-microvolt = <2800000>;
715 regulator-max-microvolt = <3540000>;
716 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
721 regulator-name = "vreg_l4c_1p8_3p0";
722 regulator-min-microvolt = <1620000>;
723 regulator-max-microvolt = <3300000>;
724 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
729 regulator-name = "vreg_l5c_1p8_3p0";
730 regulator-min-microvolt = <1620000>;
731 regulator-max-microvolt = <3300000>;
732 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
737 regulator-name = "vreg_l6c_2p96";
738 regulator-min-microvolt = <1650000>;
739 regulator-max-microvolt = <3544000>;
740 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
745 regulator-name = "vreg_l7c_3p0";
746 regulator-min-microvolt = <3000000>;
747 regulator-max-microvolt = <3544000>;
748 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
753 regulator-name = "vreg_l8c_1p8";
754 regulator-min-microvolt = <1620000>;
755 regulator-max-microvolt = <2000000>;
756 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
760 regulator-name = "vreg_l9c_2p96";
761 regulator-min-microvolt = <2700000>;
762 regulator-max-microvolt = <3544000>;
763 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
789 regulator-name = "vreg_l10c_0p88";
790 regulator-min-microvolt = <720000>;
791 regulator-max-microvolt = <1050000>;
792 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
793 regulator-allow-set-load;
794 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
801 regulator-name = "vreg_l11c_2p8";
802 regulator-min-microvolt = <2800000>;
803 regulator-max-microvolt = <3544000>;
804 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
809 regulator-name = "vreg_l12c_1p8";
810 regulator-min-microvolt = <1650000>;
811 regulator-max-microvolt = <2000000>;
812 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
817 regulator-name = "vreg_l13c_3p0";
818 regulator-min-microvolt = <2700000>;
819 regulator-max-microvolt = <3544000>;
820 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
826 regulator-name = "vreg_bob";
827 regulator-min-microvolt = <3008000>;
828 regulator-max-microvolt = <3960000>;
829 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
839 pinctrl-0 = <&cci0_default>;
840 pinctrl-1 = <&cci0_sleep>;
846 /* D-PHY sony,imx471 (Front) @ 0x1a */
852 vcc-supply = <&vreg_cam_vio_1p8>;
853 read-only;
863 /* D-PHY samsung,s5kjn1 (Ultra Wide) @ 0x2d */
869 vcc-supply = <&vreg_cam_vio_1p8>;
870 read-only;
876 /* C-PHY sony,imx766 (Wide) @ 0x10 */
882 vcc-supply = <&vreg_cam_vio_1p8>;
883 read-only;
888 protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
916 firmware-name = "qcom/sm7325/nothing/spacewar/a660_zap.mbn";
920 clock-frequency = <100000>;
925 typec-mux@42 {
929 vcc-supply = <&vreg_bob>;
931 mode-switch;
932 orientation-switch;
936 remote-endpoint = <&pmic_glink_sbu>;
943 clock-frequency = <100000>;
951 clock-frequency = <1000000>;
956 "nxp,nxp-nci-i2c";
959 interrupt-parent = <&tlmm>;
962 enable-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
963 firmware-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>;
965 pinctrl-0 = <&nfc_en>,
969 pinctrl-names = "default";
974 qcom,gsi-loader = "self";
975 memory-region = <&ipa_fw_mem>;
976 firmware-name = "qcom/sm7325/nothing/spacewar/ipa_fws.mbn";
986 vdda-supply = <&vdd_a_dsi_0_1p2>;
990 compatible = "nothing,rm692e5-spacewar",
994 reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
996 vdd-supply = <&vdd_oled>;
997 vddio-supply = <&vdd_io_oled>;
999 pinctrl-0 = <&lcd_reset_n>,
1001 pinctrl-names = "default";
1005 remote-endpoint = <&mdss_dsi0_out>;
1012 data-lanes = <0 1 2 3>;
1013 remote-endpoint = <&panel_in>;
1017 vdds-supply = <&vdd_a_dsi_0_0p9>;
1022 gpio-line-names = "NC", /* GPIO_1 */
1033 kypd_volp_n: kypd-volp-n-state {
1036 bias-pull-up;
1037 input-enable;
1038 power-source = <1>;
1045 led-0 {
1048 led-sources = <1>, <4>;
1049 led-max-microamp = <500000>;
1050 flash-max-microamp = <1500000>;
1051 flash-max-timeout-us = <1280000>;
1059 xo-therm@0 {
1061 io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
1063 qcom,hw-settle-time-us = <200>;
1067 quiet-therm@1 {
1069 io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM1_100K_PU>;
1071 qcom,hw-settle-time-us = <200>;
1074 cam-flash-therm@2 {
1076 io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM2_100K_PU>;
1078 qcom,hw-settle-time-us = <200>;
1081 sdm-skin-therm@3 {
1083 io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM3_100K_PU>;
1085 qcom,hw-settle-time-us = <200>;
1088 wide-rfc-therm@4 {
1090 io-channels = <&pmk8350_vadc PM7325_ADC7_AMUX_THM4_100K_PU>;
1092 qcom,hw-settle-time-us = <200>;
1096 usb-conn-therm@5 {
1098 io-channels = <&pmk8350_vadc PM8350B_ADC7_AMUX_THM4_100K_PU>;
1100 qcom,hw-settle-time-us = <200>;
1103 chg-skin-therm@6 {
1105 io-channels = <&pmk8350_vadc PM8350B_ADC7_GPIO2_100K_PU>;
1107 qcom,hw-settle-time-us = <200>;
1120 qcom,hw-settle-time = <200>;
1121 qcom,pre-scaling = <1 1>;
1129 qcom,hw-settle-time = <200>;
1130 qcom,pre-scaling = <1 1>;
1137 qcom,hw-settle-time = <200>;
1138 qcom,pre-scaling = <1 1>;
1145 qcom,hw-settle-time = <200>;
1146 qcom,pre-scaling = <1 1>;
1153 qcom,hw-settle-time = <200>;
1154 qcom,pre-scaling = <1 1>;
1161 qcom,hw-settle-time = <200>;
1162 qcom,pre-scaling = <1 1>;
1169 qcom,hw-settle-time = <200>;
1170 qcom,pre-scaling = <1 1>;
1178 qcom,hw-settle-time = <200>;
1179 qcom,pre-scaling = <1 1>;
1186 qcom,hw-settle-time = <200>;
1187 qcom,pre-scaling = <1 1>;
1194 qcom,hw-settle-time = <200>;
1195 qcom,pre-scaling = <1 1>;
1202 qcom,hw-settle-time = <200>;
1203 qcom,pre-scaling = <1 1>;
1220 qcom,sd-lines = <1>;
1231 vcc-supply = <&vdd_qfprom>;
1235 drive-strength = <2>;
1236 bias-disable;
1240 drive-strength = <2>;
1241 bias-disable;
1253 firmware-name = "qcom/sm7325/nothing/spacewar/adsp.mbn";
1258 firmware-name = "qcom/sm7325/nothing/spacewar/cdsp.mbn";
1263 firmware-name = "qcom/sm7325/nothing/spacewar/modem.mbn";
1268 firmware-name = "qcom/sm7325/nothing/spacewar/wpss.mbn";
1279 /* 56-59: Fingerprint reader (SPI) */
1280 gpio-reserved-ranges = <56 4>;
1282 bt_uart_sleep_cts: bt-uart-sleep-cts-state {
1285 bias-bus-hold;
1288 bt_uart_sleep_rts: bt-uart-sleep-rts-state {
1291 bias-pull-down;
1294 bt_uart_sleep_txd: bt-uart-sleep-txd-state {
1297 bias-pull-up;
1300 bt_uart_sleep_rxd: bt-uart-sleep-rxd-state {
1303 bias-pull-up;
1306 nfc_en: nfc-en-state {
1309 drive-strength = <2>;
1310 bias-disable;
1313 nfc_clk_req: nfc-clk-req-state {
1316 drive-strength = <2>;
1317 bias-disable;
1320 nfc_dwl_req: nfc-dwl-req-state {
1323 drive-strength = <2>;
1324 bias-disable;
1327 nfc_int_req: nfc-int-req-state {
1330 drive-strength = <2>;
1331 bias-pull-down;
1334 lcd_reset_n: lcd-reset-n-state {
1337 drive-strength = <8>;
1338 bias-disable;
1341 mdp_vsync_p: mdp-vsync-p-state {
1344 drive-strength = <2>;
1345 bias-pull-down;
1348 hst_bt_en: hst-bt-en-state {
1351 output-low;
1352 bias-disable;
1355 hst_sw_ctrl: hst-sw-ctrl-state {
1358 bias-pull-down;
1367 /delete-property/interrupts;
1368 interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
1371 pinctrl-1 = <&bt_uart_sleep_cts>,
1375 pinctrl-names = "default", "sleep";
1380 compatible = "qcom,wcn6750-bt";
1382 pinctrl-0 = <&hst_bt_en>,
1384 pinctrl-names = "default";
1386 enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
1387 swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
1389 vddio-supply = <&vreg_l19b_1p8>;
1390 vddaon-supply = <&vreg_s7b_0p952>;
1391 vddbtcxmx-supply = <&vreg_s7b_0p952>;
1392 vddrfacmn-supply = <&vreg_s7b_0p952>;
1393 vddrfa0p8-supply = <&vreg_s7b_0p952>;
1394 vddrfa1p7-supply = <&vdd19_pmu_rfa_i>;
1395 vddrfa1p2-supply = <&vdd13_pmu_rfa_i>;
1396 vddrfa2p2-supply = <&vreg_s1c_2p2>;
1397 vddasd-supply = <&vreg_l11c_2p8>;
1398 max-speed = <3200000>;
1400 qcom,local-bd-address-broken;
1405 reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
1407 vcc-supply = <&vreg_l7b_2p96>;
1408 vcc-max-microamp = <800000>;
1413 vccq-supply = <&vreg_l9b_1p2>;
1414 vccq-max-microamp = <900000>;
1420 vdda-phy-supply = <&vdd_a_ufs_0_core>;
1421 vdda-pll-supply = <&vdd_a_ufs_0_1p2>;
1427 qcom,select-utmi-as-pipe-clk;
1433 usb-role-switch;
1434 maximum-speed = "high-speed";
1437 phy-names = "usb2-phy";
1441 remote-endpoint = <&pmic_glink_hs_in>;
1445 vdda-pll-supply = <&vdd_a_usbhs_core>;
1446 vdda18-supply = <&vdd_a_usbhs_1p8>;
1447 vdda33-supply = <&vdd_a_usbhs_3p1>;
1452 firmware-name = "qcom/sm7325/nothing/spacewar/vpu20_1v.mbn";