Lines Matching +full:min +full:- +full:microvolt
1 // SPDX-License-Identifier: BSD-3-Clause
5 /dts-v1/;
7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
15 chassis-type = "handset";
16 qcom,msm-id = <434 0x10000>, <459 0x10000>;
17 qcom,board-id = <0x1000B 0>;
20 #address-cells = <2>;
21 #size-cells = <2>;
25 compatible = "simple-framebuffer";
35 gpio-keys {
36 compatible = "gpio-keys";
37 pinctrl-names = "default";
38 pinctrl-0 = <&vol_down_n>;
40 key-volume-down {
47 touch_en_vreg: touch-en-regulator {
48 compatible = "regulator-fixed";
49 regulator-name = "touch_en_vreg";
51 enable-active-high;
53 vin-supply = <&pm6350_l6>;
58 regulators-0 {
59 compatible = "qcom,pm6350-rpmh-regulators";
60 qcom,pmic-id = "a";
63 regulator-min-microvolt = <1000000>;
64 regulator-max-microvolt = <1200000>;
65 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
69 regulator-min-microvolt = <1503000>;
70 regulator-max-microvolt = <2048000>;
71 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
75 regulator-min-microvolt = <1503000>;
76 regulator-max-microvolt = <1980000>;
77 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
81 regulator-min-microvolt = <2700000>;
82 regulator-max-microvolt = <3300000>;
83 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
87 regulator-min-microvolt = <352000>;
88 regulator-max-microvolt = <801000>;
89 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
93 regulator-min-microvolt = <1503000>;
94 regulator-max-microvolt = <1980000>;
95 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
99 regulator-min-microvolt = <1710000>;
100 regulator-max-microvolt = <3544000>;
101 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
105 regulator-min-microvolt = <1620000>;
106 regulator-max-microvolt = <1980000>;
107 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
111 regulator-min-microvolt = <2500000>;
112 regulator-max-microvolt = <3544000>;
113 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
117 regulator-min-microvolt = <1650000>;
118 regulator-max-microvolt = <3401000>;
119 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
123 regulator-min-microvolt = <1800000>;
124 regulator-max-microvolt = <2000000>;
125 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
129 regulator-min-microvolt = <1620000>;
130 regulator-max-microvolt = <1980000>;
131 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
135 regulator-min-microvolt = <570000>;
136 regulator-max-microvolt = <650000>;
137 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
141 regulator-min-microvolt = <1700000>;
142 regulator-max-microvolt = <1900000>;
143 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
147 regulator-min-microvolt = <1100000>;
148 regulator-max-microvolt = <1305000>;
149 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
153 regulator-min-microvolt = <830000>;
154 regulator-max-microvolt = <921000>;
155 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
159 regulator-min-microvolt = <788000>;
160 regulator-max-microvolt = <1049000>;
161 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
165 regulator-min-microvolt = <1080000>;
166 regulator-max-microvolt = <1305000>;
167 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
171 regulator-min-microvolt = <530000>;
172 regulator-max-microvolt = <801000>;
173 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
177 regulator-min-microvolt = <751000>;
178 regulator-max-microvolt = <825000>;
179 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
183 regulator-min-microvolt = <1080000>;
184 regulator-max-microvolt = <1305000>;
185 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
189 regulators-1 {
190 compatible = "qcom,pm6150l-rpmh-regulators";
191 qcom,pmic-id = "e";
194 regulator-min-microvolt = <313000>;
195 regulator-max-microvolt = <1395000>;
196 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
200 regulator-min-microvolt = <1620000>;
201 regulator-max-microvolt = <1980000>;
202 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
206 regulator-min-microvolt = <1170000>;
207 regulator-max-microvolt = <1305000>;
208 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
212 regulator-min-microvolt = <1100000>;
213 regulator-max-microvolt = <1299000>;
214 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
218 regulator-min-microvolt = <1620000>;
219 regulator-max-microvolt = <3300000>;
220 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
224 regulator-min-microvolt = <1620000>;
225 regulator-max-microvolt = <3300000>;
226 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
230 regulator-min-microvolt = <1700000>;
231 regulator-max-microvolt = <2950000>;
232 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
233 regulator-allow-set-load;
234 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
239 regulator-min-microvolt = <2700000>;
240 regulator-max-microvolt = <3544000>;
241 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
245 regulator-min-microvolt = <1620000>;
246 regulator-max-microvolt = <2000000>;
247 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
251 regulator-min-microvolt = <2700000>;
252 regulator-max-microvolt = <2960000>;
253 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
254 regulator-allow-set-load;
255 regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
260 regulator-min-microvolt = <3000000>;
261 regulator-max-microvolt = <3401000>;
262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
266 regulator-min-microvolt = <3000000>;
267 regulator-max-microvolt = <3401000>;
268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
272 regulator-min-microvolt = <1620000>;
273 regulator-max-microvolt = <5492000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
275 regulator-allow-bypass;
289 clock-frequency = <400000>;
295 interrupt-parent = <&tlmm>;
297 vdd-supply = <&pm6350_l11>;
298 avdd-supply = <&touch_en_vreg>;
300 pinctrl-names = "default";
301 pinctrl-0 = <&ts_int_default &ts_active>;
306 vol_down_n: vol-down-n-state {
309 power-source = <0>;
310 bias-disable;
311 input-enable;
329 sd-cd-pins {
332 drive-strength = <2>;
333 bias-disable;
338 sd-cd-pins {
341 drive-strength = <2>;
342 bias-pull-up;
349 vmmc-supply = <&pm6150l_l9>;
350 vqmmc-supply = <&pm6150l_l6>;
352 cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
356 gpio-reserved-ranges = <13 4>, <45 2>, <56 2>;
358 ts_active: ts-active-state {
361 drive-strength = <8>;
362 bias-pull-up;
365 ts_int_default: ts-int-default-state {
368 drive-strength = <2>;
369 bias-disable;
378 /delete-property/ usb-role-switch;
379 maximum-speed = "super-speed";