Lines Matching +full:timeout +full:- +full:pwr +full:- +full:ms
1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/arm/qcom,ids.h>
11 #include <dt-bindings/input/linux-event-codes.h>
12 #include <dt-bindings/leds/common.h>
13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
14 #include <dt-bindings/sound/qcom,q6afe.h>
15 #include <dt-bindings/sound/qcom,q6asm.h>
18 #include "sdm845-wcd9340.dtsi"
22 /delete-node/ &rmtfs_mem;
25 chassis-type = "handset";
26 qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
34 stdout-path = "serial0:115200n8";
37 gpio-hall-sensor {
38 compatible = "gpio-keys";
41 pinctrl-0 = <&hall_sensor_default>;
42 pinctrl-names = "default";
44 event-hall-sensor {
47 linux,input-type = <EV_SW>;
49 linux,can-disable;
50 wakeup-source;
54 gpio-keys {
55 compatible = "gpio-keys";
59 pinctrl-names = "default";
60 pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
62 key-vol-down {
66 debounce-interval = <15>;
69 key-vol-up {
73 debounce-interval = <15>;
77 reserved-memory {
83 rmtfs_mem: rmtfs-region@f5b00000 {
84 compatible = "qcom,rmtfs-mem";
86 qcom,use-guard-pages;
87 no-map;
89 qcom,client-id = <1>;
97 removed_region: removed-region@88f00000 {
98 no-map;
105 record-size = <0x40000>;
106 console-size = <0x40000>;
107 ftrace-size = <0x40000>;
108 pmsg-size = <0x200000>;
109 ecc-size = <16>;
113 vph_pwr: vph-pwr-regulator {
114 compatible = "regulator-fixed";
115 regulator-name = "vph_pwr";
116 regulator-min-microvolt = <3700000>;
117 regulator-max-microvolt = <3700000>;
122 * is always-on; model it as a fixed regulator.
124 vreg_s4a_1p8: pm8998-smps4 {
125 compatible = "regulator-fixed";
126 regulator-name = "vreg_s4a_1p8";
128 regulator-min-microvolt = <1800000>;
129 regulator-max-microvolt = <1800000>;
131 regulator-always-on;
132 regulator-boot-on;
134 vin-supply = <&vph_pwr>;
142 ts_1p8_supply: ts-1p8-regulator {
143 compatible = "regulator-fixed";
144 regulator-name = "ts_1p8_supply";
146 regulator-min-microvolt = <1800000>;
147 regulator-max-microvolt = <1800000>;
150 enable-active-high;
151 regulator-boot-on;
154 panel_vci_3v3: panel-vci-3v3-regulator {
155 compatible = "regulator-fixed";
156 regulator-name = "LCD_VCI_3V";
158 regulator-min-microvolt = <3300000>;
159 regulator-max-microvolt = <3300000>;
162 enable-active-high;
163 pinctrl-0 = <&panel_vci_default>;
164 pinctrl-names = "default";
165 regulator-boot-on;
168 panel_vddi_poc_1p8: panel-vddi-poc-regulator {
169 compatible = "regulator-fixed";
170 regulator-name = "VDDI_POC";
172 regulator-min-microvolt = <1800000>;
173 regulator-max-microvolt = <1800000>;
176 enable-active-high;
177 pinctrl-0 = <&panel_poc_default>;
178 pinctrl-names = "default";
179 regulator-boot-on;
185 firmware-name = "qcom/sdm845/oneplus6/adsp.mbn";
189 regulators-0 {
190 compatible = "qcom,pm8998-rpmh-regulators";
191 qcom,pmic-id = "a";
193 vdd-s1-supply = <&vph_pwr>;
194 vdd-s2-supply = <&vph_pwr>;
195 vdd-s3-supply = <&vph_pwr>;
196 vdd-s4-supply = <&vph_pwr>;
197 vdd-s5-supply = <&vph_pwr>;
198 vdd-s6-supply = <&vph_pwr>;
199 vdd-s7-supply = <&vph_pwr>;
200 vdd-s8-supply = <&vph_pwr>;
201 vdd-s9-supply = <&vph_pwr>;
202 vdd-s10-supply = <&vph_pwr>;
203 vdd-s11-supply = <&vph_pwr>;
204 vdd-s12-supply = <&vph_pwr>;
205 vdd-s13-supply = <&vph_pwr>;
206 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
207 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
208 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
209 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
210 vdd-l6-supply = <&vph_pwr>;
211 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
212 vdd-l9-supply = <&vreg_bob>;
213 vdd-l10-l23-l25-supply = <&vreg_bob>;
214 vdd-l13-l19-l21-supply = <&vreg_bob>;
215 vdd-l16-l28-supply = <&vreg_bob>;
216 vdd-l18-l22-supply = <&vreg_bob>;
217 vdd-l20-l24-supply = <&vreg_bob>;
218 vdd-l26-supply = <&vreg_s3a_1p35>;
219 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
222 regulator-min-microvolt = <1352000>;
223 regulator-max-microvolt = <1352000>;
227 regulator-min-microvolt = <1904000>;
228 regulator-max-microvolt = <2040000>;
232 regulator-min-microvolt = <900000>;
233 regulator-max-microvolt = <1028000>;
241 regulator-min-microvolt = <880000>;
242 regulator-max-microvolt = <880000>;
243 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
247 regulator-min-microvolt = <1200000>;
248 regulator-max-microvolt = <1200000>;
249 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
250 regulator-always-on;
254 regulator-min-microvolt = <800000>;
255 regulator-max-microvolt = <800000>;
256 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <1800000>;
262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
267 regulator-min-microvolt = <1800000>;
268 regulator-max-microvolt = <1800000>;
269 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
273 regulator-min-microvolt = <1800000>;
274 regulator-max-microvolt = <1800000>;
275 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
276 regulator-always-on;
280 regulator-min-microvolt = <1304000>;
281 regulator-max-microvolt = <1304000>;
282 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
286 regulator-min-microvolt = <2704000>;
287 regulator-max-microvolt = <2960000>;
288 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
292 regulator-min-microvolt = <3300000>;
293 regulator-max-microvolt = <3312000>;
294 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
299 regulator-min-microvolt = <3088000>;
300 regulator-max-microvolt = <3088000>;
301 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
305 regulator-min-microvolt = <3300000>;
306 regulator-max-microvolt = <3312000>;
307 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
313 regulator-min-microvolt = <1200000>;
314 regulator-max-microvolt = <1200000>;
315 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
319 regulator-min-microvolt = <2856000>;
320 regulator-max-microvolt = <3008000>;
321 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
325 regulators-1 {
326 compatible = "qcom,pmi8998-rpmh-regulators";
327 qcom,pmic-id = "b";
329 vdd-bob-supply = <&vph_pwr>;
332 regulator-min-microvolt = <3312000>;
333 regulator-max-microvolt = <3600000>;
334 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
335 regulator-allow-bypass;
339 regulators-2 {
340 compatible = "qcom,pm8005-rpmh-regulators";
341 qcom,pmic-id = "c";
343 vdd-s1-supply = <&vph_pwr>;
344 vdd-s2-supply = <&vph_pwr>;
345 vdd-s3-supply = <&vph_pwr>;
346 vdd-s4-supply = <&vph_pwr>;
349 regulator-min-microvolt = <600000>;
350 regulator-max-microvolt = <600000>;
357 firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
361 protected-clocks = <GCC_QSPI_CORE_CLK>,
373 firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
378 clock-frequency = <100000>;
380 bq27441_fg: bq27441-battery@55 {
389 clock-frequency = <400000>;
391 synaptics-rmi4-i2c@20 {
392 compatible = "syna,rmi4-i2c";
394 #address-cells = <1>;
395 #size-cells = <0>;
396 interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
398 pinctrl-names = "default";
399 pinctrl-0 = <&ts_default_pins>;
401 vdd-supply = <&vreg_l28a_3p0>;
402 vio-supply = <&ts_1p8_supply>;
404 syna,reset-delay-ms = <200>;
405 syna,startup-delay-ms = <200>;
407 rmi4-f01@1 {
409 syna,nosleep-mode = <1>;
412 rmi4_f12: rmi4-f12@12 {
414 touchscreen-x-mm = <68>;
415 touchscreen-y-mm = <144>;
416 syna,sensor-type = <1>;
417 syna,rezero-wait-ms = <200>;
423 qcom,gsi-loader = "self";
424 memory-region = <&ipa_fw_mem>;
425 firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn";
435 vdda-supply = <&vdda_mipi_dsi0_1p2>;
446 vddio-supply = <&vreg_l14a_1p88>;
447 vci-supply = <&panel_vci_3v3>;
448 poc-supply = <&panel_vddi_poc_1p8>;
450 te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
451 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
453 pinctrl-0 = <&panel_default>;
454 pinctrl-1 = <&panel_sleep>;
455 pinctrl-names = "default", "sleep";
459 remote-endpoint = <&mdss_dsi0_out>;
466 remote-endpoint = <&panel_in>;
467 data-lanes = <0 1 2 3>;
472 vdds-supply = <&vdda_mipi_dsi0_pll>;
478 firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
482 volume_down_gpio: pm8998-gpio5-state {
486 input-enable;
487 bias-pull-up;
488 qcom,drive-strength = <0>;
492 volume_up_gpio: pm8998-gpio6-state {
496 input-enable;
497 bias-pull-up;
498 qcom,drive-strength = <0>;
510 led-0 {
513 led-sources = <1>;
514 led-max-microamp = <500000>;
515 flash-max-microamp = <1500000>;
516 flash-max-timeout-us = <1280000>;
519 led-1 {
522 led-sources = <2>;
523 led-max-microamp = <500000>;
524 flash-max-microamp = <1500000>;
525 flash-max-timeout-us = <1280000>;
532 qcom,sd-lines = <1>;
537 qcom,sd-lines = <0>;
576 drive-strength = <2>;
577 bias-disable;
581 drive-strength = <2>;
582 bias-disable;
586 drive-strength = <2>;
587 bias-pull-up;
591 drive-strength = <2>;
592 bias-disable;
596 firmware-name = "qcom/sdm845/oneplus6/slpi.mbn";
601 compatible = "qcom,sdm845-sndcard";
602 pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
603 pinctrl-names = "default";
606 mm1-dai-link {
607 link-name = "MultiMedia1";
609 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
613 mm2-dai-link {
614 link-name = "MultiMedia2";
616 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
620 mm3-dai-link {
621 link-name = "MultiMedia3";
623 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
627 mm4-dai-link {
628 link-name = "MultiMedia4";
630 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
634 mm5-dai-link {
635 link-name = "MultiMedia5";
637 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
641 mm6-dai-link {
642 link-name = "MultiMedia6";
644 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
648 speaker_playback_dai: speaker-dai-link {
649 link-name = "Speaker Playback";
651 sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
655 sound-dai = <&q6routing>;
659 slim-dai-link {
660 link-name = "SLIM Playback 1";
662 sound-dai = <&q6afedai SLIMBUS_0_RX>;
666 sound-dai = <&q6routing>;
670 sound-dai = <&wcd9340 0>;
674 slimcap-dai-link {
675 link-name = "SLIM Capture 1";
677 sound-dai = <&q6afedai SLIMBUS_0_TX>;
681 sound-dai = <&q6routing>;
685 sound-dai = <&wcd9340 1>;
689 slim2-dai-link {
690 link-name = "SLIM Playback 2";
692 sound-dai = <&q6afedai SLIMBUS_1_RX>;
696 sound-dai = <&q6routing>;
700 sound-dai = <&wcd9340 2>; /* AIF2_PB */
704 slimcap2-dai-link {
705 link-name = "SLIM Capture 2";
707 sound-dai = <&q6afedai SLIMBUS_1_TX>;
711 sound-dai = <&q6routing>;
715 sound-dai = <&wcd9340 3>; /* AIF2_CAP */
719 slimcap3-dai-link {
720 link-name = "SLIM Capture 3";
722 sound-dai = <&q6afedai SLIMBUS_2_TX>;
726 sound-dai = <&q6routing>;
730 sound-dai = <&wcd9340 5>; /* AIF3_CAP */
738 pinctrl-0 = <&qup_uart6_4pin>;
741 compatible = "qcom,wcn3990-bt";
747 firmware-name = "oneplus6/crnv21.bin";
749 vddio-supply = <&vreg_s4a_1p8>;
750 vddxo-supply = <&vreg_l7a_1p8>;
751 vddrf-supply = <&vreg_l17a_1p3>;
752 vddch0-supply = <&vreg_l25a_3p3>;
753 max-speed = <3200000>;
758 label = "LS-UART1";
765 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
767 vcc-supply = <&vreg_l20a_2p95>;
768 vcc-max-microamp = <600000>;
774 vdda-phy-supply = <&vdda_ufs1_core>;
775 vdda-pll-supply = <&vdda_ufs1_1p2>;
785 qcom,select-utmi-as-pipe-clk;
795 maximum-speed = "high-speed";
799 phy-names = "usb2-phy";
805 vdd-supply = <&vdda_usb1_ss_core>;
806 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
807 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
809 qcom,imp-res-offset-value = <8>;
810 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
811 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
812 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
816 gpio-reserved-ranges = <0 4>, <81 4>;
818 hall_sensor_default: hall-sensor-default-state {
821 drive-strength = <2>;
822 bias-disable;
825 panel_vci_default: vci-state {
828 drive-strength = <8>;
829 bias-disable;
832 panel_poc_default: poc-state {
835 drive-strength = <8>;
836 bias-disable;
839 alert_slider_default: alert-slider-default-state {
842 drive-strength = <2>;
843 bias-disable;
846 panel_default: panel-default-state {
847 esd-pins {
850 drive-strength = <2>;
851 bias-pull-down;
854 reset-pins {
857 drive-strength = <8>;
858 bias-disable;
861 te-pins {
864 drive-strength = <2>;
865 bias-disable;
869 panel_sleep: panel-sleep-state {
870 esd-pins {
873 drive-strength = <2>;
874 bias-pull-down;
877 reset-pins {
880 drive-strength = <2>;
881 bias-pull-down;
884 te-pins {
887 drive-strength = <2>;
888 bias-disable;
892 ts_default_pins: ts-int-state {
895 drive-strength = <16>;
896 bias-pull-up;
899 speaker_default: speaker-default-state {
902 drive-strength = <16>;
903 bias-pull-up;
904 output-high;
910 firmware-name = "qcom/sdm845/oneplus6/venus.mbn";
914 pinctrl-0 = <&wcd_intr_default>;
915 pinctrl-names = "default";
916 reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
917 vdd-buck-supply = <&vreg_s4a_1p8>;
918 vdd-buck-sido-supply = <&vreg_s4a_1p8>;
919 vdd-tx-supply = <&vreg_s4a_1p8>;
920 vdd-rx-supply = <&vreg_s4a_1p8>;
921 vdd-io-supply = <&vreg_s4a_1p8>;
926 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
927 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
928 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
929 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
930 vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
932 qcom,snoc-host-cap-8bit-quirk;