Lines Matching +full:ldo14 +full:- +full:16
1 // SPDX-License-Identifier: GPL-2.0
8 /dts-v1/;
10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
17 compatible = "qcom,sdm845-mtp", "qcom,sdm845";
18 chassis-type = "handset";
25 stdout-path = "serial0:115200n8";
28 vph_pwr: vph-pwr-regulator {
29 compatible = "regulator-fixed";
30 regulator-name = "vph_pwr";
31 regulator-min-microvolt = <3700000>;
32 regulator-max-microvolt = <3700000>;
37 * is always-on; model it as a fixed regulator.
39 vreg_s4a_1p8: pm8998-smps4 {
40 compatible = "regulator-fixed";
41 regulator-name = "vreg_s4a_1p8";
43 regulator-min-microvolt = <1800000>;
44 regulator-max-microvolt = <1800000>;
46 regulator-always-on;
47 regulator-boot-on;
49 vin-supply = <&vph_pwr>;
52 thermal-zones {
53 xo_thermal: xo-thermal {
54 thermal-sensors = <&pm8998_adc_tm 1>;
57 trip-point {
65 msm_thermal: msm-thermal {
66 thermal-sensors = <&pm8998_adc_tm 2>;
69 trip-point {
77 pa_thermal: pa-thermal {
78 thermal-sensors = <&pm8998_adc_tm 3>;
81 trip-point {
89 quiet_thermal: quiet-thermal {
90 thermal-sensors = <&pm8998_adc_tm 4>;
93 trip-point {
105 firmware-name = "qcom/sdm845/adsp.mbn";
109 regulators-0 {
110 compatible = "qcom,pm8998-rpmh-regulators";
111 qcom,pmic-id = "a";
113 vdd-s1-supply = <&vph_pwr>;
114 vdd-s2-supply = <&vph_pwr>;
115 vdd-s3-supply = <&vph_pwr>;
116 vdd-s4-supply = <&vph_pwr>;
117 vdd-s5-supply = <&vph_pwr>;
118 vdd-s6-supply = <&vph_pwr>;
119 vdd-s7-supply = <&vph_pwr>;
120 vdd-s8-supply = <&vph_pwr>;
121 vdd-s9-supply = <&vph_pwr>;
122 vdd-s10-supply = <&vph_pwr>;
123 vdd-s11-supply = <&vph_pwr>;
124 vdd-s12-supply = <&vph_pwr>;
125 vdd-s13-supply = <&vph_pwr>;
126 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
127 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
128 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
129 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
130 vdd-l6-supply = <&vph_pwr>;
131 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
132 vdd-l9-supply = <&vreg_bob>;
133 vdd-l10-l23-l25-supply = <&vreg_bob>;
134 vdd-l13-l19-l21-supply = <&vreg_bob>;
135 vdd-l16-l28-supply = <&vreg_bob>;
136 vdd-l18-l22-supply = <&vreg_bob>;
137 vdd-l20-l24-supply = <&vreg_bob>;
138 vdd-l26-supply = <&vreg_s3a_1p35>;
139 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
142 regulator-min-microvolt = <1100000>;
143 regulator-max-microvolt = <1100000>;
147 regulator-min-microvolt = <1352000>;
148 regulator-max-microvolt = <1352000>;
152 regulator-min-microvolt = <1904000>;
153 regulator-max-microvolt = <2040000>;
157 regulator-min-microvolt = <900000>;
158 regulator-max-microvolt = <1028000>;
180 regulator-min-microvolt = <880000>;
181 regulator-max-microvolt = <880000>;
182 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
187 regulator-min-microvolt = <1200000>;
188 regulator-max-microvolt = <1200000>;
189 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
190 regulator-always-on;
194 regulator-min-microvolt = <1000000>;
195 regulator-max-microvolt = <1000000>;
196 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
203 regulator-min-microvolt = <800000>;
204 regulator-max-microvolt = <800000>;
205 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
210 regulator-min-microvolt = <1856000>;
211 regulator-max-microvolt = <1856000>;
212 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
216 regulator-min-microvolt = <1800000>;
217 regulator-max-microvolt = <1800000>;
218 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
222 regulator-min-microvolt = <1200000>;
223 regulator-max-microvolt = <1248000>;
224 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
228 regulator-min-microvolt = <1704000>;
229 regulator-max-microvolt = <2928000>;
230 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
234 regulator-min-microvolt = <1704000>;
235 regulator-max-microvolt = <2928000>;
236 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
240 regulator-min-microvolt = <1000000>;
241 regulator-max-microvolt = <1048000>;
242 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
253 regulator-min-microvolt = <1800000>;
254 regulator-max-microvolt = <1800000>;
255 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
260 regulator-min-microvolt = <1800000>;
261 regulator-max-microvolt = <2960000>;
262 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
265 vreg_l14a_1p88: ldo14 {
266 regulator-min-microvolt = <1800000>;
267 regulator-max-microvolt = <1800000>;
268 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
272 regulator-min-microvolt = <1800000>;
273 regulator-max-microvolt = <1800000>;
274 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
278 regulator-min-microvolt = <2704000>;
279 regulator-max-microvolt = <2704000>;
280 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
284 regulator-min-microvolt = <1304000>;
285 regulator-max-microvolt = <1304000>;
286 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
290 regulator-min-microvolt = <2704000>;
291 regulator-max-microvolt = <2960000>;
292 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
296 regulator-min-microvolt = <2856000>;
297 regulator-max-microvolt = <3104000>;
298 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
302 regulator-min-microvolt = <2704000>;
303 regulator-max-microvolt = <2960000>;
304 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
308 regulator-min-microvolt = <2704000>;
309 regulator-max-microvolt = <2960000>;
310 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
314 regulator-min-microvolt = <2864000>;
315 regulator-max-microvolt = <3312000>;
316 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
320 regulator-min-microvolt = <3000000>;
321 regulator-max-microvolt = <3312000>;
322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
327 regulator-min-microvolt = <3088000>;
328 regulator-max-microvolt = <3088000>;
329 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
333 regulator-min-microvolt = <3300000>;
334 regulator-max-microvolt = <3312000>;
335 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
352 regulator-min-microvolt = <1200000>;
353 regulator-max-microvolt = <1200000>;
354 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
358 regulator-min-microvolt = <2856000>;
359 regulator-max-microvolt = <3008000>;
360 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
364 regulator-min-microvolt = <1800000>;
365 regulator-max-microvolt = <1800000>;
369 regulator-min-microvolt = <1800000>;
370 regulator-max-microvolt = <1800000>;
374 regulators-1 {
375 compatible = "qcom,pmi8998-rpmh-regulators";
376 qcom,pmic-id = "b";
378 vdd-bob-supply = <&vph_pwr>;
381 regulator-min-microvolt = <3312000>;
382 regulator-max-microvolt = <3600000>;
383 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
384 regulator-allow-bypass;
388 regulators-2 {
389 compatible = "qcom,pm8005-rpmh-regulators";
390 qcom,pmic-id = "c";
392 vdd-s1-supply = <&vph_pwr>;
393 vdd-s2-supply = <&vph_pwr>;
394 vdd-s3-supply = <&vph_pwr>;
395 vdd-s4-supply = <&vph_pwr>;
398 regulator-min-microvolt = <600000>;
399 regulator-max-microvolt = <600000>;
406 firmware-name = "qcom/sdm845/cdsp.mbn";
410 protected-clocks = <GCC_QSPI_CORE_CLK>,
424 zap-shader {
425 memory-region = <&gpu_mem>;
426 firmware-name = "qcom/sdm845/a630_zap.mbn";
432 clock-frequency = <400000>;
436 qcom,gsi-loader = "self";
437 memory-region = <&ipa_fw_mem>;
447 vdda-supply = <&vdda_mipi_dsi0_1p2>;
449 qcom,dual-dsi-mode;
450 qcom,master-dsi;
455 remote-endpoint = <&truly_in_0>;
456 data-lanes = <0 1 2 3>;
462 compatible = "truly,nt35597-2K-display";
464 vdda-supply = <&vreg_l14a_1p88>;
466 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
467 mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
470 #address-cells = <1>;
471 #size-cells = <0>;
476 remote-endpoint = <&mdss_dsi0_out>;
483 remote-endpoint = <&mdss_dsi1_out>;
492 vdds-supply = <&vdda_mipi_dsi0_pll>;
497 vdda-supply = <&vdda_mipi_dsi1_1p2>;
499 qcom,dual-dsi-mode;
502 assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
507 remote-endpoint = <&truly_in_1>;
508 data-lanes = <0 1 2 3>;
516 vdds-supply = <&vdda_mipi_dsi1_pll>;
521 firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
525 perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
527 pinctrl-0 = <&pcie0_default_state>;
528 pinctrl-names = "default";
534 vdda-phy-supply = <&vreg_l1a_0p875>;
535 vdda-pll-supply = <&vreg_l26a_1p2>;
541 perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
543 pinctrl-names = "default";
544 pinctrl-0 = <&pcie1_default_state>;
552 vdda-phy-supply = <&vreg_l1a_0p875>;
553 vdda-pll-supply = <&vreg_l26a_1p2>;
561 qcom,hw-settle-time = <200>;
568 qcom,hw-settle-time = <200>;
575 qcom,hw-settle-time = <200>;
582 qcom,hw-settle-time = <200>;
589 qcom,hw-settle-time = <200>;
596 qcom,hw-settle-time = <200>;
603 xo-thermistor@1 {
605 io-channels = <&pm8998_adc ADC5_XO_THERM_100K_PU>;
607 qcom,hw-settle-time-us = <200>;
610 msm-thermistor@2 {
612 io-channels = <&pm8998_adc ADC5_AMUX_THM1_100K_PU>;
614 qcom,hw-settle-time-us = <200>;
617 pa-thermistor@3 {
619 io-channels = <&pm8998_adc ADC5_AMUX_THM3_100K_PU>;
621 qcom,hw-settle-time-us = <200>;
624 quiet-thermistor@4 {
626 io-channels = <&pm8998_adc ADC5_AMUX_THM5_100K_PU>;
628 qcom,hw-settle-time-us = <200>;
644 pinctrl-names = "default";
645 pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
647 vmmc-supply = <&vreg_l21a_2p95>;
648 vqmmc-supply = <&vddpx_2>;
650 cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
654 pcie0_default_state: pcie0-default-state {
655 clkreq-pins {
658 bias-pull-up;
661 perst-n-pins {
664 drive-strength = <2>;
665 bias-pull-down;
668 wake-n-pins {
671 drive-strength = <2>;
672 bias-pull-up;
676 pcie1_default_state: pcie1-default-state {
677 clkreq-pins {
680 bias-pull-up;
683 perst-n-pins {
686 drive-strength = <16>;
687 bias-pull-down;
690 wake-n-pins {
693 drive-strength = <2>;
694 bias-pull-up;
706 reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
708 vcc-supply = <&vreg_l20a_2p95>;
709 vcc-max-microamp = <600000>;
715 vdda-phy-supply = <&vdda_ufs1_core>;
716 vdda-pll-supply = <&vdda_ufs1_1p2>;
731 vdd-supply = <&vdda_usb1_ss_core>;
732 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
733 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
735 qcom,imp-res-offset-value = <8>;
736 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
737 qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
738 qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
744 vdda-phy-supply = <&vdda_usb1_ss_1p2>;
745 vdda-pll-supply = <&vdda_usb1_ss_core>;
755 * signal for this port on MTP. Thus (unless you have a non-compliant
765 vdd-supply = <&vdda_usb2_ss_core>;
766 vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
767 vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
769 qcom,imp-res-offset-value = <8>;
770 qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
776 vdda-phy-supply = <&vdda_usb2_ss_1p2>;
777 vdda-pll-supply = <&vdda_usb2_ss_core>;
786 vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
787 vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
788 vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
789 vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
791 qcom,snoc-host-cap-8bit-quirk;
792 qcom,ath10k-calibration-variant = "Qualcomm_sdm845mtp";
795 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
798 drive-strength = <2>;
799 bias-disable;
803 drive-strength = <2>;
804 bias-pull-up;
808 drive-strength = <2>;
809 bias-disable;
813 gpio-reserved-ranges = <0 4>, <81 4>;
815 sdc2_clk: sdc2-clk-state {
817 bias-disable;
821 * strength is not 16 on clk, cmd, and data pins.
823 drive-strength = <16>;
826 sdc2_cmd: sdc2-cmd-state {
828 bias-pull-up;
829 drive-strength = <16>;
832 sdc2_data: sdc2-data-state {
834 bias-pull-up;
835 drive-strength = <16>;
838 sd_card_det_n: sd-card-det-n-state {
841 bias-pull-up;