Lines Matching +full:vph +full:- +full:supply
1 // SPDX-License-Identifier: BSD-3-Clause
5 /dts-v1/;
7 #include <dt-bindings/leds/common.h>
15 chassis-type = "handset";
16 qcom,msm-id = <349 0>;
17 qcom,board-id = <8 0x10000>;
26 stdout-path = "serial0:115200n8";
29 gpio-keys {
30 compatible = "gpio-keys";
32 key-volume-up {
39 vph_pwr: vph-pwr-regulator {
40 compatible = "regulator-fixed";
41 regulator-name = "vph_pwr";
42 regulator-always-on;
43 regulator-boot-on;
49 vdd-supply = <&pm8953_l3>;
50 vdda-pll-supply = <&pm8953_l7>;
51 vdda-phy-dpdm-supply = <&pm8953_l13>;
60 interrupt-parent = <&tlmm>;
62 touchscreen-size-x = <1080>;
63 touchscreen-size-y = <2160>;
64 reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
72 compatible = "nxp,nq310", "nxp,nxp-nci-i2c";
75 interrupt-parent = <&tlmm>;
78 enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
79 firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
95 multi-led {
99 #address-cells = <1>;
100 #size-cells = <0>;
123 compatible = "usb-c-connector";
125 power-role = "dual";
126 data-role = "dual";
127 self-powered;
129 typec-power-opmode = "default";
130 pd-disable;
134 remote-endpoint = <&usb_dwc3_hs>;
141 regulator-min-microamp = <500000>;
142 regulator-max-microamp = <1000000>;
152 vmmc-supply = <&pm8953_l8>;
153 vqmmc-supply = <&pm8953_l5>;
158 vmmc-supply = <&pm8953_l11>;
159 vqmmc-supply = <&pm8953_l12>;
161 cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
166 compatible = "qcom,rpm-pm8953-regulators";
168 vdd_l1-supply = <&pm8953_s3>;
169 vdd_l2_l3-supply = <&pm8953_s3>;
170 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
171 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
172 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
175 regulator-min-microvolt = <984000>;
176 regulator-max-microvolt = <1240000>;
179 regulator-min-microvolt = <1036000>;
180 regulator-max-microvolt = <2040000>;
183 regulator-min-microvolt = <1036000>;
184 regulator-max-microvolt = <2040000>;
188 regulator-min-microvolt = <975000>;
189 regulator-max-microvolt = <1050000>;
192 regulator-min-microvolt = <975000>;
193 regulator-max-microvolt = <1175000>;
196 regulator-min-microvolt = <925000>;
197 regulator-max-microvolt = <925000>;
200 regulator-min-microvolt = <1800000>;
201 regulator-max-microvolt = <1800000>;
204 regulator-min-microvolt = <1800000>;
205 regulator-max-microvolt = <1800000>;
208 regulator-min-microvolt = <1800000>;
209 regulator-max-microvolt = <1900000>;
212 regulator-min-microvolt = <2900000>;
213 regulator-max-microvolt = <2900000>;
216 regulator-min-microvolt = <3000000>;
217 regulator-max-microvolt = <3300000>;
220 regulator-min-microvolt = <2800000>;
221 regulator-max-microvolt = <3000000>;
224 regulator-min-microvolt = <2950000>;
225 regulator-max-microvolt = <2950000>;
228 regulator-min-microvolt = <1800000>;
229 regulator-max-microvolt = <2950000>;
232 regulator-min-microvolt = <3125000>;
233 regulator-max-microvolt = <3125000>;
236 regulator-min-microvolt = <1800000>;
237 regulator-max-microvolt = <1800000>;
240 regulator-min-microvolt = <2850000>;
241 regulator-max-microvolt = <2850000>;
244 regulator-min-microvolt = <1200000>;
245 regulator-max-microvolt = <1350000>;
248 regulator-min-microvolt = <2800000>;
249 regulator-max-microvolt = <2800000>;
252 regulator-min-microvolt = <975000>;
253 regulator-max-microvolt = <1225000>;
260 * 0-3: unused but protected by TZ
261 * 135-138: fingerprint reader (SPI)
263 gpio-reserved-ranges = <0 4>, <135 4>;
275 remote-endpoint = <&pmi632_hs_in>;
281 vddpx-supply = <&pm8953_l5>;
287 vddxo-supply = <&pm8953_l7>;
288 vddrfa-supply = <&pm8953_l19>;
289 vddpa-supply = <&pm8953_l9>;
290 vdddig-supply = <&pm8953_l5>;