Lines Matching +full:vph +full:- +full:supply
1 // SPDX-License-Identifier: BSD-3-Clause
5 /dts-v1/;
14 chassis-type = "tablet";
17 #address-cells = <2>;
18 #size-cells = <2>;
22 compatible = "simple-framebuffer";
30 power-domains = <&gcc MDSS_GDSC>;
42 reserved-memory {
44 no-map;
49 gpio-keys {
50 compatible = "gpio-keys";
51 key-volume-up {
58 vph_pwr: vph-pwr-regulator {
59 compatible = "regulator-fixed";
60 regulator-name = "vph_pwr";
61 regulator-always-on;
62 regulator-boot-on;
67 vdd-supply = <&pm8953_l3>;
68 vdda-pll-supply = <&pm8953_l7>;
69 vdda-phy-dpdm-supply = <&pm8953_l13>;
78 compatible = "edt,edt-ft5506";
80 interrupt-parent = <&tlmm>;
82 vcc-supply = <&pm8953_l10>;
84 pinctrl-names = "default";
85 pinctrl-0 = <&ts_int_active &ts_reset_active>;
87 reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
88 touchscreen-size-x = <1200>;
89 touchscreen-size-y = <1920>;
100 compatible = "qcom,rpm-pm8953-regulators";
102 vdd_s1-supply = <&vph_pwr>;
103 vdd_s2-supply = <&vph_pwr>;
104 vdd_s3-supply = <&vph_pwr>;
105 vdd_s4-supply = <&vph_pwr>;
106 vdd_s5-supply = <&vph_pwr>;
107 vdd_s6-supply = <&vph_pwr>;
108 vdd_s7-supply = <&vph_pwr>;
109 vdd_l1-supply = <&pm8953_s3>;
110 vdd_l2_l3-supply = <&pm8953_s3>;
111 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
112 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
113 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
116 regulator-min-microvolt = <870000>;
117 regulator-max-microvolt = <1156000>;
121 regulator-min-microvolt = <1224000>;
122 regulator-max-microvolt = <1224000>;
126 regulator-min-microvolt = <1900000>;
127 regulator-max-microvolt = <2050000>;
131 regulator-min-microvolt = <1000000>;
132 regulator-max-microvolt = <1100000>;
136 regulator-min-microvolt = <975000>;
137 regulator-max-microvolt = <1225000>;
141 regulator-min-microvolt = <925000>;
142 regulator-max-microvolt = <925000>;
146 regulator-min-microvolt = <1800000>;
147 regulator-max-microvolt = <1800000>;
151 regulator-min-microvolt = <1800000>;
152 regulator-max-microvolt = <1800000>;
156 regulator-min-microvolt = <1800000>;
157 regulator-max-microvolt = <1900000>;
161 regulator-min-microvolt = <2900000>;
162 regulator-max-microvolt = <2900000>;
166 regulator-min-microvolt = <3000000>;
167 regulator-max-microvolt = <3300000>;
171 regulator-min-microvolt = <2850000>;
172 regulator-max-microvolt = <2850000>;
176 regulator-min-microvolt = <3300000>;
177 regulator-max-microvolt = <3300000>;
181 regulator-min-microvolt = <2950000>;
182 regulator-max-microvolt = <2950000>;
186 regulator-min-microvolt = <3125000>;
187 regulator-max-microvolt = <3125000>;
191 regulator-min-microvolt = <1800000>;
192 regulator-max-microvolt = <1800000>;
196 regulator-min-microvolt = <2850000>;
197 regulator-max-microvolt = <2850000>;
201 regulator-min-microvolt = <1200000>;
202 regulator-max-microvolt = <1350000>;
206 regulator-min-microvolt = <2800000>;
207 regulator-max-microvolt = <2850000>;
211 regulator-min-microvolt = <975000>;
212 regulator-max-microvolt = <1225000>;
218 vmmc-supply = <&pm8953_l8>;
219 vqmmc-supply = <&pm8953_l5>;
225 vmmc-supply = <&pm8953_l11>;
226 vqmmc-supply = <&pm8953_l12>;
228 cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
230 pinctrl-names = "default", "sleep";
231 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
232 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
238 gpio-reserved-ranges = <0 4>, <135 4>;
240 ts_int_active: ts-int-active-state {
243 drive-strength = <8>;
244 bias-pull-up;
247 ts_reset_active: ts-reset-active-state {
250 drive-strength = <0x08>;
251 bias-pull-up;
264 vddpx-supply = <&pm8953_l5>;
272 vddxo-supply = <&pm8953_l7>;
273 vddrfa-supply = <&pm8953_l19>;
274 vddpa-supply = <&pm8953_l9>;
275 vdddig-supply = <&pm8953_l5>;