Lines Matching +full:settle +full:- +full:time +full:- +full:us
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
8 #include <dt-bindings/leds/common.h>
9 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
10 #include <dt-bindings/sound/qcom,q6afe.h>
11 #include <dt-bindings/sound/qcom,q6asm.h>
12 #include <dt-bindings/usb/pd.h>
20 compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
21 qcom,msm-id = <455 0x20001>;
22 qcom,board-id = <11 3>;
31 stdout-path = "serial0:115200n8";
35 clk40m: can-clock {
36 compatible = "fixed-clock";
37 #clock-cells = <0>;
38 clock-frequency = <40000000>;
41 dc12v: dc12v-regulator {
42 compatible = "regulator-fixed";
43 regulator-name = "DC12V";
44 regulator-min-microvolt = <12000000>;
45 regulator-max-microvolt = <12000000>;
46 regulator-always-on;
49 hdmi-out {
50 compatible = "hdmi-connector";
55 remote-endpoint = <<9611_out>;
61 compatible = "gpio-leds";
63 led-user4 {
68 default-state = "off";
69 panic-indicator;
72 led-wlan {
77 linux,default-trigger = "phy0tx";
78 default-state = "off";
81 led-bt {
86 linux,default-trigger = "bluetooth-power";
87 default-state = "off";
91 lt9611_1v2: lt9611-vdd12-regulator {
92 compatible = "regulator-fixed";
93 regulator-name = "LT9611_1V2";
95 vin-supply = <&vdc_3v3>;
96 regulator-min-microvolt = <1200000>;
97 regulator-max-microvolt = <1200000>;
100 lt9611_3v3: lt9611-3v3 {
101 compatible = "regulator-fixed";
102 regulator-name = "LT9611_3V3";
104 vin-supply = <&vdc_3v3>;
105 regulator-min-microvolt = <3300000>;
106 regulator-max-microvolt = <3300000>;
107 regulator-boot-on;
108 regulator-always-on;
111 qca6390-pmu {
112 compatible = "qcom,qca6390-pmu";
114 pinctrl-names = "default";
115 pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
117 vddaon-supply = <&vreg_s6a_0p95>;
118 vddpmu-supply = <&vreg_s2f_0p95>;
119 vddrfa0p95-supply = <&vreg_s2f_0p95>;
120 vddrfa1p3-supply = <&vreg_s8c_1p3>;
121 vddrfa1p9-supply = <&vreg_s5a_1p9>;
122 vddpcie1p3-supply = <&vreg_s8c_1p3>;
123 vddpcie1p9-supply = <&vreg_s5a_1p9>;
124 vddio-supply = <&vreg_s4a_1p8>;
126 wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
127 bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
131 regulator-name = "vreg_pmu_rfa_cmn";
135 regulator-name = "vreg_pmu_aon_0p59";
139 regulator-name = "vreg_pmu_wlcx_0p8";
143 regulator-name = "vreg_pmu_wlmx_0p85";
147 regulator-name = "vreg_pmu_btcmx_0p85";
151 regulator-name = "vreg_pmu_rfa_0p8";
155 regulator-name = "vreg_pmu_rfa_1p2";
159 regulator-name = "vreg_pmu_rfa_1p7";
163 regulator-name = "vreg_pmu_pcie_0p9";
167 regulator-name = "vreg_pmu_pcie_1p8";
172 thermal-zones {
173 conn-thermal {
174 thermal-sensors = <&pm8150b_adc_tm 0>;
177 active-config0 {
185 pm8150l-pcb-thermal {
186 thermal-sensors = <&pm8150l_adc_tm 1>;
189 active-config0 {
197 skin-msm-thermal {
198 thermal-sensors = <&pm8150l_adc_tm 0>;
201 active-config0 {
209 wifi-thermal {
210 thermal-sensors = <&pm8150_adc_tm 1>;
213 active-config0 {
221 xo-thermal {
222 thermal-sensors = <&pm8150_adc_tm 0>;
225 active-config0 {
234 vbat: vbat-regulator {
235 compatible = "regulator-fixed";
236 regulator-name = "VBAT";
237 vin-supply = <&vreg_l11c_3p3>;
238 regulator-min-microvolt = <4200000>;
239 regulator-max-microvolt = <4200000>;
240 regulator-always-on;
243 vbat_som: vbat-som-regulator {
244 compatible = "regulator-fixed";
245 regulator-name = "VBAT_SOM";
246 vin-supply = <&dc12v>;
247 regulator-min-microvolt = <4200000>;
248 regulator-max-microvolt = <4200000>;
249 regulator-always-on;
252 vdc_3v3: vdc-3v3-regulator {
253 compatible = "regulator-fixed";
254 regulator-name = "VDC_3V3";
255 vin-supply = <&vreg_l11c_3p3>;
256 regulator-min-microvolt = <3300000>;
257 regulator-max-microvolt = <3300000>;
258 regulator-always-on;
261 vdc_5v: vdc-5v-regulator {
262 compatible = "regulator-fixed";
263 regulator-name = "VDC_5V";
265 regulator-min-microvolt = <5000000>;
266 regulator-max-microvolt = <5000000>;
267 regulator-always-on;
268 vin-supply = <&vreg_l11c_3p3>;
271 vph_pwr: vph-pwr-regulator {
272 compatible = "regulator-fixed";
273 regulator-name = "vph_pwr";
274 regulator-min-microvolt = <3700000>;
275 regulator-max-microvolt = <3700000>;
276 regulator-always-on;
279 vreg_s4a_1p8: vreg-s4a-1p8 {
280 compatible = "regulator-fixed";
281 regulator-name = "vreg_s4a_1p8";
282 regulator-min-microvolt = <1800000>;
283 regulator-max-microvolt = <1800000>;
284 regulator-always-on;
290 firmware-name = "qcom/sm8250/adsp.mbn";
294 regulators-0 {
295 compatible = "qcom,pm8009-1-rpmh-regulators";
296 qcom,pmic-id = "f";
298 vdd-s1-supply = <&vph_pwr>;
299 vdd-s2-supply = <&vph_pwr>;
300 vdd-l2-supply = <&vreg_s8c_1p3>;
301 vdd-l5-l6-supply = <&vreg_bob>;
302 vdd-l7-supply = <&vreg_s4a_1p8>;
305 regulator-name = "vreg_s2f_0p95";
306 regulator-min-microvolt = <900000>;
307 regulator-max-microvolt = <952000>;
308 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
312 regulator-name = "vreg_l1f_1p1";
313 regulator-min-microvolt = <1104000>;
314 regulator-max-microvolt = <1104000>;
315 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
319 regulator-name = "vreg_l2f_1p2";
320 regulator-min-microvolt = <1200000>;
321 regulator-max-microvolt = <1200000>;
322 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
326 regulator-name = "vreg_l6f_2p8";
327 regulator-min-microvolt = <2800000>;
328 regulator-max-microvolt = <2800000>;
329 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
333 regulator-name = "vreg_l7f_1p8";
334 regulator-min-microvolt = <1800000>;
335 regulator-max-microvolt = <1800000>;
336 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
340 regulators-1 {
341 compatible = "qcom,pm8150-rpmh-regulators";
342 qcom,pmic-id = "a";
344 vdd-s1-supply = <&vph_pwr>;
345 vdd-s2-supply = <&vph_pwr>;
346 vdd-s3-supply = <&vph_pwr>;
347 vdd-s4-supply = <&vph_pwr>;
348 vdd-s5-supply = <&vph_pwr>;
349 vdd-s6-supply = <&vph_pwr>;
350 vdd-s7-supply = <&vph_pwr>;
351 vdd-s8-supply = <&vph_pwr>;
352 vdd-s9-supply = <&vph_pwr>;
353 vdd-s10-supply = <&vph_pwr>;
354 vdd-l2-l10-supply = <&vreg_bob>;
355 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
356 vdd-l6-l9-supply = <&vreg_s8c_1p3>;
357 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
358 vdd-l13-l16-l17-supply = <&vreg_bob>;
361 regulator-name = "vreg_l2a_3p1";
362 regulator-min-microvolt = <3072000>;
363 regulator-max-microvolt = <3072000>;
364 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
368 regulator-name = "vreg_l3a_0p9";
369 regulator-min-microvolt = <928000>;
370 regulator-max-microvolt = <932000>;
371 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
375 regulator-name = "vreg_l5a_0p88";
376 regulator-min-microvolt = <880000>;
377 regulator-max-microvolt = <880000>;
378 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
382 regulator-name = "vreg_l6a_1p2";
383 regulator-min-microvolt = <1200000>;
384 regulator-max-microvolt = <1200000>;
385 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
389 regulator-name = "vreg_l7a_1p7";
390 regulator-min-microvolt = <1704000>;
391 regulator-max-microvolt = <1800000>;
392 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
396 regulator-name = "vreg_l9a_1p2";
397 regulator-min-microvolt = <1200000>;
398 regulator-max-microvolt = <1200000>;
399 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
403 regulator-name = "vreg_l10a_1p8";
404 regulator-min-microvolt = <1800000>;
405 regulator-max-microvolt = <1800000>;
406 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
410 regulator-name = "vreg_l12a_1p8";
411 regulator-min-microvolt = <1800000>;
412 regulator-max-microvolt = <1800000>;
413 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
417 regulator-name = "vreg_l13a_ts_3p0";
418 regulator-min-microvolt = <3008000>;
419 regulator-max-microvolt = <3008000>;
420 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
424 regulator-name = "vreg_l14a_1p8";
425 regulator-min-microvolt = <1800000>;
426 regulator-max-microvolt = <1880000>;
427 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
431 regulator-name = "vreg_l15a_1p8";
432 regulator-min-microvolt = <1800000>;
433 regulator-max-microvolt = <1800000>;
434 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
438 regulator-name = "vreg_l16a_2p7";
439 regulator-min-microvolt = <2704000>;
440 regulator-max-microvolt = <2960000>;
441 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
445 regulator-name = "vreg_l17a_3p0";
446 regulator-min-microvolt = <2856000>;
447 regulator-max-microvolt = <3008000>;
448 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
452 regulator-name = "vreg_l18a_0p92";
453 regulator-min-microvolt = <800000>;
454 regulator-max-microvolt = <912000>;
455 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
459 regulator-name = "vreg_s5a_1p9";
460 regulator-min-microvolt = <1904000>;
461 regulator-max-microvolt = <2000000>;
462 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
466 regulator-name = "vreg_s6a_0p95";
467 regulator-min-microvolt = <920000>;
468 regulator-max-microvolt = <1128000>;
469 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
473 regulators-2 {
474 compatible = "qcom,pm8150l-rpmh-regulators";
475 qcom,pmic-id = "c";
477 vdd-s1-supply = <&vph_pwr>;
478 vdd-s2-supply = <&vph_pwr>;
479 vdd-s3-supply = <&vph_pwr>;
480 vdd-s4-supply = <&vph_pwr>;
481 vdd-s5-supply = <&vph_pwr>;
482 vdd-s6-supply = <&vph_pwr>;
483 vdd-s7-supply = <&vph_pwr>;
484 vdd-s8-supply = <&vph_pwr>;
485 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
486 vdd-l2-l3-supply = <&vreg_s8c_1p3>;
487 vdd-l4-l5-l6-supply = <&vreg_bob>;
488 vdd-l7-l11-supply = <&vreg_bob>;
489 vdd-l9-l10-supply = <&vreg_bob>;
490 vdd-bob-supply = <&vph_pwr>;
493 regulator-name = "vreg_bob";
494 regulator-min-microvolt = <3008000>;
495 regulator-max-microvolt = <4000000>;
496 regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
500 regulator-name = "vreg_l1c_1p8";
501 regulator-min-microvolt = <1800000>;
502 regulator-max-microvolt = <1800000>;
503 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
507 regulator-name = "vreg_l2c_1p2";
508 regulator-min-microvolt = <1200000>;
509 regulator-max-microvolt = <1200000>;
510 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
514 regulator-name = "vreg_l3c_0p8";
515 regulator-min-microvolt = <800000>;
516 regulator-max-microvolt = <800000>;
517 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
521 regulator-name = "vreg_l4c_1p7";
522 regulator-min-microvolt = <1704000>;
523 regulator-max-microvolt = <2928000>;
524 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
528 regulator-name = "vreg_l5c_1p8";
529 regulator-min-microvolt = <1800000>;
530 regulator-max-microvolt = <2928000>;
531 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
535 regulator-name = "vreg_l6c_2p96";
536 regulator-min-microvolt = <1800000>;
537 regulator-max-microvolt = <2960000>;
538 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
542 regulator-name = "vreg_l7c_cam_vcm0_2p85";
543 regulator-min-microvolt = <2856000>;
544 regulator-max-microvolt = <3104000>;
545 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
549 regulator-name = "vreg_l8c_1p8";
550 regulator-min-microvolt = <1800000>;
551 regulator-max-microvolt = <1800000>;
552 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
556 regulator-name = "vreg_l9c_2p96";
557 regulator-min-microvolt = <2704000>;
558 regulator-max-microvolt = <2960000>;
559 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
563 regulator-name = "vreg_l10c_3p0";
564 regulator-min-microvolt = <3000000>;
565 regulator-max-microvolt = <3000000>;
566 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
570 regulator-name = "vreg_l11c_3p3";
571 regulator-min-microvolt = <3296000>;
572 regulator-max-microvolt = <3296000>;
573 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
574 regulator-always-on;
578 regulator-name = "vreg_s8c_1p3";
579 regulator-min-microvolt = <1352000>;
580 regulator-max-microvolt = <1352000>;
581 regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
588 firmware-name = "qcom/sm8250/cdsp.mbn";
600 firmware-name = "qcom/sm8250/a650_zap.mbn";
603 /* LS-I2C0 */
610 clock-frequency = <400000>;
612 lt9611_codec: hdmi-bridge@2b {
615 #sound-dai-cells = <1>;
617 interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>;
619 reset-gpios = <&pm8150l_gpios 5 GPIO_ACTIVE_HIGH>;
621 vdd-supply = <<9611_1v2>;
622 vcc-supply = <<9611_3v3>;
624 pinctrl-names = "default";
625 pinctrl-0 = <<9611_irq_pin <9611_rst_pin>;
628 #address-cells = <1>;
629 #size-cells = <0>;
635 remote-endpoint = <&mdss_dsi0_out>;
644 remote-endpoint = <&mdss_dsi1_out>;
653 remote-endpoint = <&hdmi_con>;
661 /* LS-I2C1 */
665 typec-mux@1c {
669 vcc-supply = <&vreg_s4a_1p8>;
671 retimer-switch;
672 orientation-switch;
675 #address-cells = <1>;
676 #size-cells = <0>;
682 remote-endpoint = <&pm8150b_typec_mux_in>;
690 remote-endpoint = <&usb_1_qmpphy_out>;
691 data-lanes = <0 1 2 3>;
699 remote-endpoint = <&pm8150b_typec_sbu_out>;
715 data-lanes = <0 1>;
716 remote-endpoint = <&usb_1_qmpphy_dp_in>;
721 vdda-supply = <&vreg_l9a_1p2>;
724 qcom,dual-dsi-mode;
725 qcom,master-dsi;
730 remote-endpoint = <<9611_a>;
731 data-lanes = <0 1 2 3>;
736 vdds-supply = <&vreg_l5a_0p88>;
743 qcom,hw-settle-time = <200>;
750 qcom,hw-settle-time = <200>;
758 xo-therm@0 {
760 io-channels = <&pm8150_adc ADC5_XO_THERM_100K_PU>;
762 qcom,hw-settle-time-us = <200>;
765 wifi-therm@1 {
767 io-channels = <&pm8150_adc ADC5_AMUX_THM2_100K_PU>;
769 qcom,hw-settle-time-us = <200>;
779 vdda-phy-supply = <&vreg_l5a_0p88>;
780 vdda-pll-supply = <&vreg_l9a_1p2>;
788 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
789 vddaon-supply = <&vreg_pmu_aon_0p59>;
790 vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
791 vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
792 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
793 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
794 vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
795 vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
796 vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
806 vdda-phy-supply = <&vreg_l5a_0p88>;
807 vdda-pll-supply = <&vreg_l9a_1p2>;
816 vdda-phy-supply = <&vreg_l5a_0p88>;
817 vdda-pll-supply = <&vreg_l9a_1p2>;
821 gpio-reserved-ranges = <1 1>, <3 2>, <7 1>;
822 gpio-line-names =
825 "PM_GPIO-F",
839 qcom,hw-settle-time = <200>;
847 conn-therm@0 {
849 io-channels = <&pm8150b_adc ADC5_AMUX_THM3_100K_PU>;
851 qcom,hw-settle-time-us = <200>;
856 gpio-line-names =
875 qcom,hw-settle-time = <200>;
882 qcom,hw-settle-time = <200>;
890 skin-msm-therm@0 {
892 io-channels = <&pm8150l_adc ADC5_AMUX_THM2_100K_PU>;
894 qcom,hw-settle-time-us = <200>;
897 pm8150l-therm@1 {
899 io-channels = <&pm8150l_adc ADC5_AMUX_THM3_100K_PU>;
901 qcom,hw-settle-time-us = <200>;
906 gpio-line-names =
912 "PM_GPIO-A", /* PWM */
916 "PM_GPIO-B",
920 lt9611_rst_pin: lt9611-rst-state {
924 output-high;
925 input-disable;
926 power-source = <0>;
933 #address-cells = <1>;
934 #size-cells = <0>;
940 function-enumerator = <3>;
942 linux,default-trigger = "heartbeat";
943 default-state = "on";
950 function-enumerator = <2>;
951 default-state = "on";
958 function-enumerator = <1>;
963 mode-bootloader = <0x2>;
964 mode-recovery = <0x1>;
992 qcom,sd-lines = <0 1 2 3>;
1000 qcom,sd-lines = <0>;
1019 is-compress-dai;
1026 pinctrl-names = "default";
1027 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
1028 vmmc-supply = <&vreg_l9c_2p96>;
1029 vqmmc-supply = <&vreg_l6c_2p96>;
1030 cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
1031 bus-width = <4>;
1032 no-sdio;
1033 no-mmc;
1037 firmware-name = "qcom/sm8250/Thundercomm/RB5/slpi.mbn";
1043 compatible = "qcom,qrb5165-rb5-sndcard";
1044 pinctrl-0 = <&tert_mi2s_active>;
1045 pinctrl-names = "default";
1046 model = "Qualcomm-RB5-WSA8815-Speakers-DMIC0";
1047 audio-routing =
1050 "VA DMIC0", "vdd-micb",
1051 "VA DMIC1", "vdd-micb";
1053 mm1-dai-link {
1054 link-name = "MultiMedia1";
1056 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
1060 mm2-dai-link {
1061 link-name = "MultiMedia2";
1063 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
1067 mm3-dai-link {
1068 link-name = "MultiMedia3";
1070 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
1074 mm4-dai-link {
1075 link-name = "MultiMedia4";
1078 sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
1082 hdmi-dai-link {
1083 link-name = "HDMI Playback";
1085 sound-dai = <&q6afedai TERTIARY_MI2S_RX>;
1089 sound-dai = <&q6routing>;
1093 sound-dai = <<9611_codec 0>;
1097 dma-dai-link {
1098 link-name = "WSA Playback";
1100 sound-dai = <&q6afedai WSA_CODEC_DMA_RX_0>;
1104 sound-dai = <&q6routing>;
1108 sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
1112 va-dai-link {
1113 link-name = "VA Capture";
1115 sound-dai = <&q6afedai VA_CODEC_DMA_TX_0>;
1119 sound-dai = <&q6routing>;
1123 sound-dai = <&vamacro 0>;
1131 pinctrl-names = "default";
1132 pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs_gpio>;
1133 cs-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
1139 interrupts-extended = <&tlmm 15 IRQ_TYPE_LEVEL_LOW>;
1140 spi-max-frequency = <10000000>;
1141 vdd-supply = <&vdc_5v>;
1142 xceiver-supply = <&vdc_5v>;
1152 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
1153 #thermal-sensor-cells = <0>;
1154 sound-name-prefix = "SpkrLeft";
1155 #sound-dai-cells = <0>;
1161 powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_LOW>;
1162 #thermal-sensor-cells = <0>;
1163 sound-name-prefix = "SpkrRight";
1164 #sound-dai-cells = <0>;
1169 gpio-reserved-ranges = <40 4>;
1170 gpio-line-names =
1171 "GPIO-MM",
1172 "GPIO-NN",
1173 "GPIO-OO",
1174 "GPIO-PP",
1175 "GPIO-A",
1176 "GPIO-C",
1177 "GPIO-E",
1178 "GPIO-D",
1179 "I2C0-SDA",
1180 "I2C0-SCL",
1181 "GPIO-TT", /* GPIO_10 */
1185 "GPIO-X",
1193 "GPIO-AAA",
1194 "GPIO-BBB",
1195 "GPIO-CCC",
1196 "GPIO-Z",
1197 "GPIO-DDD",
1198 "GPIO-BB",
1203 "GPIO-UU",
1217 "GPIO-F",
1218 "GPIO-JJ",
1227 "GPIO-QQ",
1228 "GPIO-RR",
1235 "GPIO-AA",
1237 "GPIO-G",
1238 "GPIO-LL",
1249 "GPIO-II",
1253 "GPIO-CC",
1254 "GPIO-DD",
1255 "GPIO-EE",
1256 "GPIO-FF",
1257 "GPIO-GG",
1258 "GPIO-HH",
1259 "GPIO-VV",
1260 "GPIO-WW",
1263 "GPIO-K",
1264 "GPIO-I",
1269 "GPIO-AA", /* CSI4_MCLK */
1270 "GPIO-BB", /* CSI5_MCLK */
1271 "GPIO-KK", /* GPIO_100 */
1280 "GPIO-L",
1285 "GPIO-J",
1286 "GPIO-YY",
1287 "GPIO-H",
1288 "GPIO-ZZ",
1296 "GPIO-M",
1297 "GPIO-N",
1298 "GPIO-O",
1299 "GPIO-P",
1307 "GPIO-B",
1315 "GPIO-U",
1316 "GPIO-Y",
1317 "GPIO-R",
1318 "GPIO-Q",
1319 "GPIO-S",
1320 "GPIO-T",
1321 "GPIO-V", /* GPIO_150 */
1322 "GPIO-W",
1341 "GPIO-SS", /* GPIO_170 */
1342 "GPIO-XX",
1352 bt_en_state: bt-default-state {
1355 drive-strength = <16>;
1356 output-low;
1357 bias-pull-up;
1360 lt9611_irq_pin: lt9611-irq-state {
1363 bias-disable;
1366 sdc2_default_state: sdc2-default-state {
1367 clk-pins {
1369 bias-disable;
1370 drive-strength = <16>;
1373 cmd-pins {
1375 bias-pull-up;
1376 drive-strength = <10>;
1379 data-pins {
1381 bias-pull-up;
1382 drive-strength = <10>;
1386 sdc2_card_det_n: sd-card-det-n-state {
1389 bias-pull-up;
1392 wlan_en_state: wlan-default-state {
1395 drive-strength = <16>;
1396 output-low;
1397 bias-pull-up;
1405 compatible = "qcom,qca6390-bt";
1407 vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
1408 vddaon-supply = <&vreg_pmu_aon_0p59>;
1409 vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
1410 vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
1411 vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
1412 vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
1423 vcc-supply = <&vreg_l17a_3p0>;
1424 vcc-max-microamp = <800000>;
1425 vccq-supply = <&vreg_l6a_1p2>;
1426 vccq-max-microamp = <800000>;
1427 vccq2-supply = <&vreg_s4a_1p8>;
1428 vccq2-max-microamp = <800000>;
1434 vdda-phy-supply = <&vreg_l5a_0p88>;
1435 vdda-pll-supply = <&vreg_l9a_1p2>;
1444 usb-role-switch;
1448 remote-endpoint = <&pm8150b_hs_in>;
1454 vdda-pll-supply = <&vreg_l5a_0p88>;
1455 vdda33-supply = <&vreg_l2a_3p1>;
1456 vdda18-supply = <&vreg_l12a_1p8>;
1462 vdda-phy-supply = <&vreg_l9a_1p2>;
1463 vdda-pll-supply = <&vreg_l18a_0p92>;
1467 remote-endpoint = <&redriver_phy_con_ss>;
1481 vdda-pll-supply = <&vreg_l5a_0p88>;
1482 vdda33-supply = <&vreg_l2a_3p1>;
1483 vdda18-supply = <&vreg_l12a_1p8>;
1489 vdda-phy-supply = <&vreg_l9a_1p2>;
1490 vdda-pll-supply = <&vreg_l18a_0p92>;
1494 pinctrl-0 = <&dmic01_active>;
1495 pinctrl-names = "default";
1496 vdd-micb-supply = <&vreg_s4a_1p8>;
1497 qcom,dmic-sample-rate = <600000>;
1508 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
1510 drive-strength = <6>;
1511 bias-disable;
1515 drive-strength = <6>;
1516 bias-disable;
1520 regulator-min-microamp = <500000>;
1521 regulator-max-microamp = <3000000>;
1528 vdd-pdphy-supply = <&vreg_l2a_3p1>;
1531 compatible = "usb-c-connector";
1533 power-role = "source";
1534 data-role = "dual";
1535 self-powered;
1537 source-pdos = <PDO_FIXED(5000, 3000,
1550 #address-cells = <1>;
1551 #size-cells = <0>;
1556 remote-endpoint = <&usb_1_dwc3_hs_out>;
1563 remote-endpoint = <&redriver_usb_con_ss>;
1571 remote-endpoint = <&redriver_usb_con_sbu>;
1579 remote-endpoint = <&mdss_dp_out>;