Lines Matching +full:pwm +full:- +full:vibrator

1 // SPDX-License-Identifier: BSD-3-Clause
6 #include <dt-bindings/iio/qcom,spmi-vadc.h>
7 #include <dt-bindings/interrupt-controller/irq.h>
8 #include <dt-bindings/spmi/spmi.h>
11 	thermal-zones {
12 		pmi632-thermal {
13 			polling-delay-passive = <100>;
15 			thermal-sensors = <&pmi632_temp>;
42 		compatible = "qcom,pmi632", "qcom,spmi-pmic";
44 		#address-cells = <1>;
45 		#size-cells = <0>;
47 		pmi632_vbus: usb-vbus-regulator@1100 {
48 			compatible = "qcom,pmi632-vbus-reg", "qcom,pm8150b-vbus-reg";
54 			compatible = "qcom,pmi632-typec";
64 			interrupt-names = "or-rid-detect-change",
65 					  "vpd-detect",
66 					  "cc-state-change",
67 					  "vconn-oc",
68 					  "vbus-change",
69 					  "attach-detach",
70 					  "legacy-cable-detect",
71 					  "try-snk-src-detect";
72 			vdd-vbus-supply = <&pmi632_vbus>;
77 		pmi632_temp: temp-alarm@2400 {
78 			compatible = "qcom,spmi-temp-alarm";
81 			#thermal-sensor-cells = <0>;
85 			compatible = "qcom,spmi-adc5";
87 			#address-cells = <1>;
88 			#size-cells = <0>;
89 			#io-channel-cells = <1>;
94 				qcom,pre-scaling = <1 1>;
100 				qcom,pre-scaling = <1 1>;
106 				qcom,pre-scaling = <1 1>;
112 				qcom,pre-scaling = <1 1>;
118 				qcom,pre-scaling = <1 16>;
124 				qcom,pre-scaling = <1 1>;
130 				qcom,hw-settle-time = <200>;
131 				qcom,pre-scaling = <1 1>;
138 				qcom,pre-scaling = <1 3>;
144 				qcom,pre-scaling = <1 3>;
149 		pmi632_adc_tm: adc-tm@3500 {
150 			compatible = "qcom,spmi-adc-tm5";
153 			#thermal-sensor-cells = <1>;
154 			#address-cells = <1>;
155 			#size-cells = <0>;
160 			compatible = "qcom,pmi632-pbs", "qcom,pbs";
165 			compatible = "qcom,spmi-sdam";
167 			#address-cells = <1>;
168 			#size-cells = <1>;
173 			compatible = "qcom,pmi632-gpio", "qcom,spmi-gpio";
175 			gpio-controller;
176 			gpio-ranges = <&pmi632_gpios 0 0 8>;
177 			#gpio-cells = <2>;
178 			interrupt-controller;
179 			#interrupt-cells = <2>;
184 		compatible = "qcom,pmi632", "qcom,spmi-pmic";
186 		#address-cells = <1>;
187 		#size-cells = <0>;
189 		pmi632_lpg: pwm {
190 			compatible = "qcom,pmi632-lpg";
193 			nvmem-names = "lpg_chan_sdam";
196 			#address-cells = <1>;
197 			#size-cells = <0>;
198 			#pwm-cells = <2>;
203 		pmi632_vib: vibrator@5700 {
204 			compatible = "qcom,pmi632-vib";