Lines Matching +full:pre +full:- +full:scaling

1 // SPDX-License-Identifier: BSD-3-Clause
6 #include <dt-bindings/iio/qcom,spmi-vadc.h>
7 #include <dt-bindings/interrupt-controller/irq.h>
8 #include <dt-bindings/spmi/spmi.h>
11 	thermal-zones {
12 		pm7250b-thermal {
13 			polling-delay-passive = <100>;
15 			thermal-sensors = <&pm7250b_temp>;
42 		compatible = "qcom,pm7250b", "qcom,spmi-pmic";
44 		#address-cells = <1>;
45 		#size-cells = <0>;
47 		pm7250b_vbus: usb-vbus-regulator@1100 {
48 			compatible = "qcom,pm7250b-vbus-reg", "qcom,pm8150b-vbus-reg";
54 			compatible = "qcom,pm7250b-typec", "qcom,pm8150b-typec";
73 			interrupt-names = "or-rid-detect-change",
74 					  "vpd-detect",
75 					  "cc-state-change",
76 					  "vconn-oc",
77 					  "vbus-change",
78 					  "attach-detach",
79 					  "legacy-cable-detect",
80 					  "try-snk-src-detect",
81 					  "sig-tx",
82 					  "sig-rx",
83 					  "msg-tx",
84 					  "msg-rx",
85 					  "msg-tx-failed",
86 					  "msg-tx-discarded",
87 					  "msg-rx-discarded",
88 					  "fr-swap";
89 			vdd-vbus-supply = <&pm7250b_vbus>;
93 		pm7250b_temp: temp-alarm@2400 {
94 			compatible = "qcom,spmi-temp-alarm";
97 			io-channels = <&pm7250b_adc ADC5_DIE_TEMP>;
98 			io-channel-names = "thermal";
99 			#thermal-sensor-cells = <0>;
103 			compatible = "qcom,spmi-adc5";
105 			#address-cells = <1>;
106 			#size-cells = <0>;
107 			#io-channel-cells = <1>;
112 				qcom,pre-scaling = <1 1>;
118 				qcom,pre-scaling = <1 1>;
124 				qcom,pre-scaling = <1 1>;
130 				qcom,pre-scaling = <1 1>;
136 				qcom,pre-scaling = <1 16>;
142 				qcom,pre-scaling = <1 1>;
148 				qcom,hw-settle-time = <200>;
149 				qcom,pre-scaling = <1 1>;
155 				qcom,pre-scaling = <1 6>;
161 				qcom,hw-settle-time = <200>;
162 				qcom,pre-scaling = <1 1>;
169 				qcom,pre-scaling = <1 3>;
175 				qcom,pre-scaling = <1 3>;
181 				qcom,pre-scaling = <1 3>;
186 		pm7250b_adc_tm: adc-tm@3500 {
187 			compatible = "qcom,spmi-adc-tm5";
190 			#thermal-sensor-cells = <1>;
191 			#address-cells = <1>;
192 			#size-cells = <0>;
197 			compatible = "qcom,pm7250b-gpio", "qcom,spmi-gpio";
199 			gpio-controller;
200 			gpio-ranges = <&pm7250b_gpios 0 0 12>;
201 			#gpio-cells = <2>;
202 			interrupt-controller;
203 			#interrupt-cells = <2>;
208 		compatible = "qcom,pm7250b", "qcom,spmi-pmic";
210 		#address-cells = <1>;
211 		#size-cells = <0>;