Lines Matching +full:rmi4 +full:- +full:i2c
1 // SPDX-License-Identifier: BSD-3-Clause
6 /dts-v1/;
11 #include <dt-bindings/leds/common.h>
13 /delete-node/ &adsp_fw_mem;
14 /delete-node/ &cont_splash_mem;
15 /delete-node/ &qseecom_mem;
16 /delete-node/ &wcnss_fw_mem;
21 chassis-type = "handset";
22 qcom,msm-id = <293 0>;
23 qcom,board-id = <0x1000b 0x08>;
25 gpio-keys {
26 compatible = "gpio-keys";
28 pinctrl-names = "default";
29 pinctrl-0 = <&gpio_key_default>;
31 key-volume-up {
38 reserved-memory {
41 no-map;
44 cont_splash_mem: cont-splash@90001000 {
46 no-map;
51 no-map;
56 no-map;
62 record-size = <0x1000>;
63 console-size = <0x80000>;
64 ftrace-size = <0x1000>;
65 pmsg-size = <0x8000>;
73 i2c-sensors {
74 compatible = "i2c-gpio";
75 sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
76 scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
77 i2c-gpio,delay-us = <2>; /* ~100 kHz */
78 #address-cells = <1>;
79 #size-cells = <0>;
84 vdd-supply = <&pm8953_l10>;
85 vddio-supply = <&pm8953_l6>;
86 mount-matrix = "1", "0", "0",
87 "0", "-1", "0",
92 vph_pwr: vph-pwr-regulator {
93 compatible = "regulator-fixed";
94 regulator-name = "vph_pwr";
95 regulator-always-on;
96 regulator-boot-on;
101 vdd-supply = <&pm8953_l3>;
102 vdda-pll-supply = <&pm8953_l7>;
103 vdda-phy-dpdm-supply = <&pm8953_l13>;
111 led-controller@45 {
115 vcc-supply = <&pm8953_l10>;
116 vio-supply = <&pm8953_l5>;
118 #address-cells = <1>;
119 #size-cells = <0>;
123 led-max-microamp = <5000>;
135 compatible = "syna,rmi4-i2c";
136 interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>;
138 #address-cells = <1>;
139 #size-cells = <0>;
141 vdd-supply = <&pm8953_l10>;
142 vio-supply = <&pm8953_l6>;
144 pinctrl-names = "init", "suspend";
145 pinctrl-0 = <&ts_reset_active &ts_int_active>;
146 pinctrl-1 = <&ts_reset_suspend &ts_int_suspend>;
147 syna,reset-delay-ms = <200>;
148 syna,startup-delay-ms = <500>;
150 rmi4-f01@1 {
152 syna,nosleep-mode = <1>;
155 rmi4-f12@12 {
157 syna,rezero-wait-ms = <20>;
158 syna,sensor-type = <1>;
159 touchscreen-x-mm = <68>;
160 touchscreen-y-mm = <122>;
171 qcom,current-limit-microamp = <20000>;
172 qcom,ovp-millivolt = <29600>;
173 qcom,num-strings = <2>;
174 qcom,external-pfet;
182 compatible = "qcom,rpm-pm8953-regulators";
183 vdd_s1-supply = <&vph_pwr>;
184 vdd_s2-supply = <&vph_pwr>;
185 vdd_s3-supply = <&vph_pwr>;
186 vdd_s4-supply = <&vph_pwr>;
187 vdd_s5-supply = <&vph_pwr>;
188 vdd_s6-supply = <&vph_pwr>;
189 vdd_s7-supply = <&vph_pwr>;
190 vdd_l1-supply = <&pm8953_s3>;
191 vdd_l2_l3-supply = <&pm8953_s3>;
192 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
193 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
194 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
197 regulator-min-microvolt = <870000>;
198 regulator-max-microvolt = <1156000>;
202 regulator-min-microvolt = <984000>;
203 regulator-max-microvolt = <1224000>;
207 regulator-min-microvolt = <1900000>;
208 regulator-max-microvolt = <2050000>;
212 regulator-min-microvolt = <1000000>;
213 regulator-max-microvolt = <1100000>;
217 regulator-min-microvolt = <1200000>;
218 regulator-max-microvolt = <1225000>;
222 regulator-min-microvolt = <925000>;
223 regulator-max-microvolt = <925000>;
227 regulator-min-microvolt = <1800000>;
228 regulator-max-microvolt = <1800000>;
232 regulator-min-microvolt = <1800000>;
233 regulator-max-microvolt = <1800000>;
237 regulator-min-microvolt = <1800000>;
238 regulator-max-microvolt = <1900000>;
242 regulator-min-microvolt = <2900000>;
243 regulator-max-microvolt = <2900000>;
247 regulator-min-microvolt = <3000000>;
248 regulator-max-microvolt = <3300000>;
252 regulator-min-microvolt = <2850000>;
253 regulator-max-microvolt = <2850000>;
257 regulator-min-microvolt = <2950000>;
258 regulator-max-microvolt = <2950000>;
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <2950000>;
267 regulator-min-microvolt = <3125000>;
268 regulator-max-microvolt = <3125000>;
272 regulator-min-microvolt = <1800000>;
273 regulator-max-microvolt = <1800000>;
277 regulator-min-microvolt = <2750000>;
278 regulator-max-microvolt = <2850000>;
282 regulator-min-microvolt = <1200000>;
283 regulator-max-microvolt = <1380000>;
287 regulator-min-microvolt = <2800000>;
288 regulator-max-microvolt = <2800000>;
292 regulator-min-microvolt = <1200000>;
293 regulator-max-microvolt = <1225000>;
299 vmmc-supply = <&pm8953_l8>;
300 vqmmc-supply = <&pm8953_l5>;
306 vmmc-supply = <&pm8953_l11>;
307 vqmmc-supply = <&pm8953_l12>;
309 pinctrl-names = "default", "sleep";
310 pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
311 pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
317 gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
319 ts_reset_active: ts-reset-active-state {
322 drive-strength = <8>;
323 bias-pull-up;
326 ts_reset_suspend: ts-reset-suspend-state {
329 drive-strength = <2>;
330 bias-pull-up;
333 ts_int_active: ts-int-active-state {
336 drive-strength = <8>;
337 bias-pull-up;
340 ts_int_suspend: ts-int-suspend-state {
343 drive-strength = <2>;
344 bias-pull-down;
349 pinctrl-names = "default";
350 pinctrl-0 = <&uart_console_active>;
360 /delete-property/ usb-role-switch;