Lines Matching +full:vcc +full:- +full:max +full:- +full:microamp
1 // SPDX-License-Identifier: GPL-2.0-only
6 /dts-v1/;
8 #include <dt-bindings/arm/qcom,ids.h>
9 #include <dt-bindings/gpio/gpio.h>
13 /delete-node/ &qseecom_mem;
18 chassis-type = "handset";
20 qcom,msm-id = <QCOM_ID_MSM8917 0>;
21 qcom,board-id = <0x1000b 2>, <0x2000b 2>;
24 compatible = "pwm-backlight";
26 brightness-levels = <0 255>;
27 num-interpolated-steps = <255>;
28 default-brightness-level = <128>;
32 compatible = "simple-battery";
33 charge-full-design-microamp-hours = <3000000>;
34 energy-full-design-microwatt-hours = <11500000>;
35 constant-charge-current-max-microamp = <1000000>;
36 constant-charge-voltage-max-microvolt = <4400000>;
37 precharge-current-microamp = <256000>;
38 charge-term-current-microamp = <60000>;
39 voltage-min-design-microvolt = <3400000>;
43 #address-cells = <2>;
44 #size-cells = <2>;
47 stdout-path = "framebuffer0";
50 compatible = "simple-framebuffer";
64 power-domains = <&gcc MDSS_GDSC>;
68 gpio-keys {
69 compatible = "gpio-keys";
71 pinctrl-0 = <&gpio_keys_default>;
72 pinctrl-names = "default";
74 key-volup {
78 debounce-interval = <15>;
82 vph_pwr: regulator-vph-pwr {
83 compatible = "regulator-fixed";
84 regulator-name = "vph_pwr";
85 regulator-min-microvolt = <3700000>;
86 regulator-max-microvolt = <3700000>;
87 regulator-always-on;
88 regulator-boot-on;
91 reserved-memory {
94 no-map;
99 no-map;
108 compatible = "edt,edt-ft5306";
110 interrupts-extended = <&tlmm 65 IRQ_TYPE_LEVEL_LOW>;
111 reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
112 pinctrl-0 = <&tsp_int_rst_default>;
113 pinctrl-names = "default";
114 vcc-supply = <&pm8937_l10>;
115 iovcc-supply = <&pm8937_l5>;
116 touchscreen-size-x = <720>;
117 touchscreen-size-y = <1280>;
127 monitored-battery = <&battery>;
133 interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
134 pinctrl-0 = <&bq25601_int_default>;
135 pinctrl-names = "default";
136 input-voltage-limit-microvolt = <4400000>;
137 input-current-limit-microamp = <1000000>;
138 monitored-battery = <&battery>;
143 pwm_enable_default: pwm-enable-default-state {
146 output-low;
147 bias-disable;
148 qcom,drive-strength = <2>;
153 pinctrl-0 = <&pwm_enable_default>;
154 pinctrl-names = "default";
166 regulators-0 {
167 compatible = "qcom,rpm-pm8937-regulators";
169 vdd_s1-supply = <&vph_pwr>;
170 vdd_s2-supply = <&vph_pwr>;
171 vdd_s3-supply = <&vph_pwr>;
172 vdd_s4-supply = <&vph_pwr>;
174 vdd_l1_l19-supply = <&pm8937_s3>;
175 vdd_l2_l23-supply = <&pm8937_s3>;
176 vdd_l3-supply = <&pm8937_s3>;
177 vdd_l4_l5_l6_l7_l16-supply = <&pm8937_s4>;
178 vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
179 vdd_l9_l10_l13_l14_l15_l18-supply = <&vph_pwr>;
182 regulator-min-microvolt = <1000000>;
183 regulator-max-microvolt = <1225000>;
187 regulator-min-microvolt = <1300000>;
188 regulator-max-microvolt = <1300000>;
192 regulator-min-microvolt = <2050000>;
193 regulator-max-microvolt = <2050000>;
197 regulator-min-microvolt = <1200000>;
198 regulator-max-microvolt = <1200000>;
202 regulator-min-microvolt = <1800000>;
203 regulator-max-microvolt = <1800000>;
207 regulator-min-microvolt = <1800000>;
208 regulator-max-microvolt = <1800000>;
212 regulator-min-microvolt = <1800000>;
213 regulator-max-microvolt = <1800000>;
217 regulator-min-microvolt = <2850000>;
218 regulator-max-microvolt = <2900000>;
222 regulator-min-microvolt = <3000000>;
223 regulator-max-microvolt = <3300000>;
227 regulator-min-microvolt = <2800000>;
228 regulator-max-microvolt = <3000000>;
232 regulator-min-microvolt = <2950000>;
233 regulator-max-microvolt = <2950000>;
234 regulator-allow-set-load;
235 regulator-system-load = <200000>;
239 regulator-min-microvolt = <1800000>;
240 regulator-max-microvolt = <2950000>;
244 regulator-min-microvolt = <3075000>;
245 regulator-max-microvolt = <3075000>;
249 regulator-min-microvolt = <1800000>;
250 regulator-max-microvolt = <3300000>;
254 regulator-min-microvolt = <1800000>;
255 regulator-max-microvolt = <3300000>;
259 regulator-min-microvolt = <1800000>;
260 regulator-max-microvolt = <1800000>;
264 regulator-min-microvolt = <2800000>;
265 regulator-max-microvolt = <2900000>;
269 regulator-min-microvolt = <1225000>;
270 regulator-max-microvolt = <1350000>;
274 regulator-min-microvolt = <2800000>;
275 regulator-max-microvolt = <2800000>;
279 regulator-min-microvolt = <1200000>;
280 regulator-max-microvolt = <1200000>;
287 vmmc-supply = <&pm8937_l8>;
288 vqmmc-supply = <&pm8937_l5>;
294 cd-gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
295 vmmc-supply = <&pm8937_l11>;
296 vqmmc-supply = <&pm8937_l12>;
297 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
298 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
299 pinctrl-names = "default", "sleep";
305 clock-frequency = <32768>;
309 bq25601_int_default: bq25601-int-default-state {
312 drive-strength = <2>;
313 bias-pull-up;
316 gpio_keys_default: gpio-keys-default-state {
319 drive-strength = <2>;
320 bias-pull-up;
323 sdc2_cd_default: sdc2-cd-default-state {
326 drive-strength = <2>;
327 bias-disable;
330 tsp_int_rst_default: tsp-int-rst-default-state {
333 drive-strength = <8>;
334 bias-pull-up;
339 vddpx-supply = <&pm8937_l5>;
346 vddxo-supply = <&pm8937_l7>;
347 vddrfa-supply = <&pm8937_l19>;
348 vddpa-supply = <&pm8937_l9>;
349 vdddig-supply = <&pm8937_l5>;
357 clock-frequency = <19200000>;