Lines Matching +full:miso +full:- +full:gpios

1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
8 /dts-v1/;
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
16 	compatible = "qcom,ipq5424-rdp466", "qcom,ipq5424";
22 	gpio-keys {
23 		compatible = "gpio-keys";
24 		pinctrl-0 = <&gpio_keys_default>;
25 		pinctrl-names = "default";
27 		button-wps {
30 			gpios = <&tlmm 19 GPIO_ACTIVE_LOW>;
31 			debounce-interval = <60>;
36 		compatible = "gpio-leds";
37 		pinctrl-0 = <&gpio_leds_default>;
38 		pinctrl-names = "default";
40 		led-0 {
43 			gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
44 			linux,default-trigger = "phy0tx";
45 			default-state = "off";
49 	vreg_misc_3p3: regulator-usb-3p3 {
50 		compatible = "regulator-fixed";
51 		regulator-min-microvolt = <3300000>;
52 		regulator-max-microvolt = <3300000>;
53 		regulator-boot-on;
54 		regulator-always-on;
55 		regulator-name = "usb_hs_vdda_3p3";
58 	vreg_misc_1p8: regulator-usb-1p8 {
59 		compatible = "regulator-fixed";
60 		regulator-min-microvolt = <1800000>;
61 		regulator-max-microvolt = <1800000>;
62 		regulator-boot-on;
63 		regulator-always-on;
64 		regulator-name = "vdda_1p8_usb";
67 	vreg_misc_0p925: regulator-usb-0p925 {
68 		compatible = "regulator-fixed";
69 		regulator-min-microvolt = <925000>;
70 		regulator-max-microvolt = <925000>;
71 		regulator-boot-on;
72 		regulator-always-on;
73 		regulator-name = "vdd_core_usb";
86 	pinctrl-0 = <&pcie2_default_state>;
87 	pinctrl-names = "default";
89 	perst-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
99 	pinctrl-0 = <&pcie3_default_state>;
100 	pinctrl-names = "default";
102 	perst-gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
112 	vdd-supply = <&vreg_misc_0p925>;
113 	vdda-pll-supply = <&vreg_misc_1p8>;
114 	vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
120 	vdd-supply = <&vreg_misc_0p925>;
121 	vdda-pll-supply = <&vreg_misc_1p8>;
122 	vdda-phy-dpdm-supply = <&vreg_misc_3p3>;
128 	pinctrl-0 = <&sdc_default_state>;
129 	pinctrl-names = "default";
135 	clock-frequency = <32000>;
139 	pinctrl-0 = <&spi0_default_state>;
140 	pinctrl-names = "default";
144 		compatible = "micron,n25q128a11", "jedec,spi-nor";
146 		#address-cells = <1>;
147 		#size-cells = <1>;
148 		spi-max-frequency = <50000000>;
153 	vdda-pll-supply = <&vreg_misc_1p8>;
154 	vdda-phy-supply = <&vreg_misc_0p925>;
160 	gpio_keys_default: gpio-keys-default-state {
163 		drive-strength = <8>;
164 		bias-pull-up;
167 	gpio_leds_default: gpio-leds-default-state {
170 		drive-strength = <8>;
171 		bias-pull-down;
174 	spi0_default_state: spi0-default-state {
175 		clk-pins {
178 			drive-strength = <8>;
179 			bias-pull-down;
182 		cs-pins {
185 			drive-strength = <8>;
186 			bias-pull-up;
189 		miso-pins {
192 			drive-strength = <8>;
193 			bias-pull-down;
196 		mosi-pins {
199 			drive-strength = <8>;
200 			bias-pull-down;
204 	sdc_default_state: sdc-default-state {
205 		clk-pins {
208 			drive-strength = <8>;
209 			bias-disable;
212 		cmd-pins {
215 			drive-strength = <8>;
216 			bias-pull-up;
219 		data-pins {
222 			drive-strength = <8>;
223 			bias-pull-up;
227 	pcie2_default_state: pcie2-default-state {
230 		drive-strength = <8>;
231 		bias-pull-up;
234 	pcie3_default_state: pcie3-default-state {
237 		drive-strength = <8>;
238 		bias-pull-up;
243 	pinctrl-0 = <&uart1_pins>;
244 	pinctrl-names = "default";
257 	clock-frequency = <24000000>;