Lines Matching +full:tegra194 +full:- +full:pinmux
1 // SPDX-License-Identifier: GPL-2.0
2 #include "tegra194.dtsi"
4 #include <dt-bindings/mfd/max77620.h>
24 stdout-path = "serial0:115200n8";
31 phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
32 phy-handle = <&phy>;
33 phy-mode = "rgmii-id";
36 #address-cells = <1>;
37 #size-cells = <0>;
39 phy: ethernet-phy@0 {
40 compatible = "ethernet-phy-ieee802.3-c22";
42 interrupt-parent = <&gpio>;
44 #phy-cells = <0>;
49 memory-controller@2c00000 {
56 power-sensor@40 {
59 #address-cells = <1>;
60 #size-cells = <0>;
65 shunt-resistor-micro-ohms = <5000>;
70 shunt-resistor-micro-ohms = <5000>;
75 shunt-resistor-micro-ohms = <5000>;
92 vcc-supply = <&vdd_1v8ls>;
93 address-width = <8>;
96 read-only;
101 avdd-usb-supply = <&vdd_usb_3v3>;
102 vclamp-usb-supply = <&vdd_1v8ao>;
105 usb2-1 {
106 vbus-supply = <&vdd_5v0_sys>;
109 usb2-3 {
110 vbus-supply = <&vdd_5v0_sys>;
113 usb3-0 {
114 vbus-supply = <&vdd_5v0_sys>;
117 usb3-3 {
118 vbus-supply = <&vdd_5v0_sys>;
128 nvidia,invert-interrupt;
140 interrupt-parent = <&pmc>;
142 #interrupt-cells = <2>;
143 interrupt-controller;
145 #gpio-cells = <2>;
146 gpio-controller;
148 pinctrl-names = "default";
149 pinctrl-0 = <&max20024_default>;
153 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
154 maxim,shutdown-fps-time-period-us = <640>;
158 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
159 maxim,shutdown-fps-time-period-us = <640>;
160 maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
164 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
165 maxim,shutdown-fps-time-period-us = <640>;
169 max20024_default: pinmux {
177 function = "fps-out";
178 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
183 function = "fps-out";
184 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
189 function = "fps-out";
190 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
195 function = "32k-out1";
196 drive-push-pull = <1>;
202 drive-push-pull = <1>;
208 drive-push-pull = <0>;
213 in-sd0-supply = <&vdd_5v0_sys>;
214 in-sd1-supply = <&vdd_5v0_sys>;
215 in-sd2-supply = <&vdd_5v0_sys>;
216 in-sd3-supply = <&vdd_5v0_sys>;
217 in-sd4-supply = <&vdd_5v0_sys>;
219 in-ldo0-1-supply = <&vdd_5v0_sys>;
220 in-ldo2-supply = <&vdd_5v0_sys>;
221 in-ldo3-5-supply = <&vdd_5v0_sys>;
222 in-ldo4-6-supply = <&vdd_5v0_sys>;
223 in-ldo7-8-supply = <&vdd_1v8ls>;
226 regulator-name = "VDDIO_SYS_1V0";
227 regulator-min-microvolt = <1000000>;
228 regulator-max-microvolt = <1000000>;
229 regulator-always-on;
230 regulator-boot-on;
234 regulator-name = "VDDIO_SYS_1V8HS";
235 regulator-min-microvolt = <1800000>;
236 regulator-max-microvolt = <1800000>;
237 regulator-always-on;
238 regulator-boot-on;
242 regulator-name = "VDDIO_SYS_1V8LS";
243 regulator-min-microvolt = <1800000>;
244 regulator-max-microvolt = <1800000>;
245 regulator-always-on;
246 regulator-boot-on;
250 regulator-name = "VDDIO_AO_1V8";
251 regulator-min-microvolt = <1800000>;
252 regulator-max-microvolt = <1800000>;
253 regulator-always-on;
254 regulator-boot-on;
258 regulator-name = "VDD_DDR_1V1";
259 regulator-min-microvolt = <1100000>;
260 regulator-max-microvolt = <1100000>;
261 regulator-always-on;
262 regulator-boot-on;
266 regulator-name = "VDD_RTC";
267 regulator-min-microvolt = <800000>;
268 regulator-max-microvolt = <800000>;
269 regulator-always-on;
270 regulator-boot-on;
274 regulator-name = "VDDIO_AO_3V3";
275 regulator-min-microvolt = <3300000>;
276 regulator-max-microvolt = <3300000>;
277 regulator-always-on;
278 regulator-boot-on;
282 regulator-name = "VDD_EMMC_3V3";
283 regulator-min-microvolt = <3300000>;
284 regulator-max-microvolt = <3300000>;
288 regulator-name = "VDD_USB_3V3";
289 regulator-min-microvolt = <3300000>;
290 regulator-max-microvolt = <3300000>;
291 regulator-always-on;
292 regulator-boot-on;
296 regulator-name = "VDD_SDIO_3V3";
297 regulator-min-microvolt = <3300000>;
298 regulator-max-microvolt = <3300000>;
302 regulator-name = "AVDD_CSI_1V2";
303 regulator-min-microvolt = <1200000>;
304 regulator-max-microvolt = <1200000>;