Lines Matching +full:ldo0 +full:- +full:in +full:- +full:supply

1 // SPDX-License-Identifier: GPL-2.0
4 #include <dt-bindings/mfd/max77620.h>
27 stdout-path = "serial0:115200n8";
34 phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 5) GPIO_ACTIVE_LOW>;
35 phy-handle = <&phy>;
36 phy-mode = "rgmii-id";
39 #address-cells = <1>;
40 #size-cells = <0>;
42 phy: ethernet-phy@0 {
43 compatible = "ethernet-phy-ieee802.3-c22";
45 interrupt-parent = <&gpio>;
47 #phy-cells = <0>;
52 memory-controller@2c00000 {
59 power-sensor@40 {
62 #address-cells = <1>;
63 #size-cells = <0>;
68 shunt-resistor-micro-ohms = <5000>;
73 shunt-resistor-micro-ohms = <5000>;
78 shunt-resistor-micro-ohms = <5000>;
82 power-sensor@41 {
85 #address-cells = <1>;
86 #size-cells = <0>;
91 shunt-resistor-micro-ohms = <5000>;
96 shunt-resistor-micro-ohms = <5000>;
101 shunt-resistor-micro-ohms = <5000>;
118 vcc-supply = <&vdd_1v8ls>;
119 address-width = <8>;
122 read-only;
128 cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
134 bus-width = <8>;
135 non-removable;
137 vqmmc-supply = <&vdd_1v8ls>;
138 vmmc-supply = <&vdd_emmc_3v3>;
142 avdd-usb-supply = <&vdd_usb_3v3>;
143 vclamp-usb-supply = <&vdd_1v8ao>;
146 usb2-0 {
147 vbus-supply = <&vdd_5v0_sys>;
150 usb2-1 {
151 vbus-supply = <&vdd_5v0_sys>;
154 usb2-3 {
155 vbus-supply = <&vdd_5v_sata>;
158 usb3-0 {
159 vbus-supply = <&vdd_5v0_sys>;
162 usb3-2 {
163 vbus-supply = <&vdd_5v0_sys>;
166 usb3-3 {
167 vbus-supply = <&vdd_5v0_sys>;
177 nvidia,invert-interrupt;
189 interrupt-parent = <&pmc>;
191 #interrupt-cells = <2>;
192 interrupt-controller;
194 #gpio-cells = <2>;
195 gpio-controller;
197 pinctrl-names = "default";
198 pinctrl-0 = <&max20024_default>;
202 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
203 maxim,shutdown-fps-time-period-us = <640>;
207 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
208 maxim,shutdown-fps-time-period-us = <640>;
209 maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
213 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
214 maxim,shutdown-fps-time-period-us = <640>;
226 function = "fps-out";
227 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
232 function = "fps-out";
233 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
238 function = "fps-out";
239 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
244 function = "32k-out1";
245 drive-push-pull = <1>;
251 drive-push-pull = <1>;
257 drive-push-pull = <0>;
262 in-sd0-supply = <&vdd_5v0_sys>;
263 in-sd1-supply = <&vdd_5v0_sys>;
264 in-sd2-supply = <&vdd_5v0_sys>;
265 in-sd3-supply = <&vdd_5v0_sys>;
266 in-sd4-supply = <&vdd_5v0_sys>;
268 in-ldo0-1-supply = <&vdd_5v0_sys>;
269 in-ldo2-supply = <&vdd_5v0_sys>;
270 in-ldo3-5-supply = <&vdd_5v0_sys>;
271 in-ldo4-6-supply = <&vdd_5v0_sys>;
272 in-ldo7-8-supply = <&vdd_1v8ls>;
275 regulator-name = "VDDIO_SYS_1V0";
276 regulator-min-microvolt = <1000000>;
277 regulator-max-microvolt = <1000000>;
278 regulator-always-on;
279 regulator-boot-on;
283 regulator-name = "VDDIO_SYS_1V8HS";
284 regulator-min-microvolt = <1800000>;
285 regulator-max-microvolt = <1800000>;
286 regulator-always-on;
287 regulator-boot-on;
291 regulator-name = "VDDIO_SYS_1V8LS";
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <1800000>;
294 regulator-always-on;
295 regulator-boot-on;
299 regulator-name = "VDDIO_AO_1V8";
300 regulator-min-microvolt = <1800000>;
301 regulator-max-microvolt = <1800000>;
302 regulator-always-on;
303 regulator-boot-on;
307 regulator-name = "VDD_DDR_1V1";
308 regulator-min-microvolt = <1100000>;
309 regulator-max-microvolt = <1100000>;
310 regulator-always-on;
311 regulator-boot-on;
314 ldo0 {
315 regulator-name = "VDD_RTC";
316 regulator-min-microvolt = <800000>;
317 regulator-max-microvolt = <800000>;
318 regulator-always-on;
319 regulator-boot-on;
323 regulator-name = "VDDIO_AO_3V3";
324 regulator-min-microvolt = <3300000>;
325 regulator-max-microvolt = <3300000>;
326 regulator-always-on;
327 regulator-boot-on;
331 regulator-name = "VDD_EMMC_3V3";
332 regulator-min-microvolt = <3300000>;
333 regulator-max-microvolt = <3300000>;
337 regulator-name = "VDD_USB_3V3";
338 regulator-min-microvolt = <3300000>;
339 regulator-max-microvolt = <3300000>;
343 regulator-name = "VDD_SDIO_3V3";
344 regulator-min-microvolt = <3300000>;
345 regulator-max-microvolt = <3300000>;
349 regulator-name = "AVDD_CSI_1V2";
350 regulator-min-microvolt = <1200000>;
351 regulator-max-microvolt = <1200000>;
356 temperature-sensor@4c {
360 interrupt-parent = <&gpio>;
363 vcc-supply = <&vdd_1v8ls>;
365 #thermal-sensor-cells = <1>;
370 vdd_5v0_sys: regulator-vdd-5v0-sys {
371 compatible = "regulator-fixed";
372 regulator-name = "VIN_SYS_5V0";
373 regulator-min-microvolt = <5000000>;
374 regulator-max-microvolt = <5000000>;
375 regulator-always-on;
376 regulator-boot-on;
379 vdd_hdmi: regulator-vdd-hdmi {
380 compatible = "regulator-fixed";
381 regulator-name = "VDD_5V0_HDMI_CON";
382 regulator-min-microvolt = <5000000>;
383 regulator-max-microvolt = <5000000>;
385 enable-active-high;
388 vdd_3v3_pcie: regulator-vdd-3v3-pcie {
389 compatible = "regulator-fixed";
390 regulator-name = "PEX_3V3";
391 regulator-min-microvolt = <3300000>;
392 regulator-max-microvolt = <3300000>;
394 regulator-boot-on;
395 enable-active-high;
398 vdd_12v_pcie: regulator-vdd-12v-pcie {
399 compatible = "regulator-fixed";
400 regulator-name = "VDD_12V";
401 regulator-min-microvolt = <1200000>;
402 regulator-max-microvolt = <1200000>;
404 regulator-boot-on;
407 vdd_5v_sata: regulator-vdd-5v0-sata {
408 compatible = "regulator-fixed";
409 regulator-name = "VDD_5V_SATA";
410 regulator-min-microvolt = <5000000>;
411 regulator-max-microvolt = <5000000>;
413 enable-active-high;