Lines Matching +full:hog +full:-
1 // SPDX-License-Identifier: GPL-2.0
7 #include <dt-bindings/gpio/gpio.h>
16 stdout-path = "serial0:921600n8";
21 compatible = "linaro,optee-tz";
26 gpio-keys {
27 compatible = "gpio-keys";
28 pinctrl-names = "default";
29 pinctrl-0 = <&gpio_keys_default>;
31 key-volume-up {
35 wakeup-source;
36 debounce-interval = <15>;
39 key-volume-down {
43 wakeup-source;
44 debounce-interval = <15>;
50 clock-div = <2>;
51 pinctrl-names = "default";
52 pinctrl-0 = <&i2c0_pins_a>;
58 reset-gpios = <&pio 65 GPIO_ACTIVE_LOW>;
59 pinctrl-names = "default";
60 pinctrl-0 = <&tca6416_pins>;
62 gpio-controller;
63 #gpio-cells = <2>;
65 eint20-mux-sel0-hog {
66 gpio-hog;
69 line-name = "eint20_mux_sel0";
72 expcon-mux-sel1-hog {
73 gpio-hog;
76 line-name = "expcon_mux_sel1";
79 mrg-di-mux-sel2-hog {
80 gpio-hog;
83 line-name = "mrg_di_mux_sel2";
86 sd-sdio-mux-sel3-hog {
87 gpio-hog;
90 line-name = "sd_sdio_mux_sel3";
93 sd-sdio-mux-ctrl7-hog {
94 gpio-hog;
96 output-low;
97 line-name = "sd_sdio_mux_ctrl7";
100 hw-id0-hog {
101 gpio-hog;
104 line-name = "hw_id0";
107 hw-id1-hog {
108 gpio-hog;
111 line-name = "hw_id1";
114 hw-id2-hog {
115 gpio-hog;
118 line-name = "hw_id2";
121 fg-int-n-hog {
122 gpio-hog;
125 line-name = "fg_int_n";
128 usba-pwr-en-hog {
129 gpio-hog;
131 output-high;
132 line-name = "usba_pwr_en";
135 wifi-3v3-pg-hog {
136 gpio-hog;
139 line-name = "wifi_3v3_pg";
142 cam-rst-hog {
143 gpio-hog;
145 output-low;
146 line-name = "cam_rst";
149 cam-pwdn-hog {
150 gpio-hog;
152 output-low;
153 line-name = "cam_pwdn";
159 clock-div = <2>;
160 pinctrl-names = "default";
161 pinctrl-0 = <&i2c2_pins_a>;
170 pinctrl-names = "default";
171 pinctrl-0 = <ðernet_pins_default>;
172 phy-handle = <ð_phy>;
173 phy-mode = "rmii";
174 mac-address = [00 00 00 00 00 00];
178 #address-cells = <1>;
179 #size-cells = <0>;
181 eth_phy: ethernet-phy@0 {
190 usb-role-switch;
193 compatible = "usb-c-connector";
194 label = "USB-C";
207 bias-pull-up;
208 input-enable;
216 bias-disable;
224 bias-disable;
231 output-high;
236 input-enable;
237 bias-pull-up;