Lines Matching +full:gbe0 +full:- +full:50
1 // SPDX-License-Identifier: GPL-2.0-only OR MIT
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/leds/common.h>
7 #include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
13 stdout-path = "serial0:115200n8";
16 fan: pwm-fan {
17 compatible = "pwm-fan";
18 /* cooling level (0, 1, 2, 3) : (0% duty, 30% duty, 50% duty, 100% duty) */
19 cooling-levels = <0 80 128 255>;
20 #cooling-cells = <2>;
25 gpio-leds {
26 compatible = "gpio-leds";
28 led_green: led-green {
32 default-state = "on";
35 led_blue: led-blue {
39 default-state = "off";
44 reg_1p8v: regulator-1p8v {
45 compatible = "regulator-fixed";
46 regulator-name = "fixed-1.8V";
47 regulator-min-microvolt = <1800000>;
48 regulator-max-microvolt = <1800000>;
49 regulator-boot-on;
50 regulator-always-on;
53 reg_3p3v: regulator-3p3v {
54 compatible = "regulator-fixed";
55 regulator-name = "fixed-3.3V";
56 regulator-min-microvolt = <3300000>;
57 regulator-max-microvolt = <3300000>;
58 regulator-boot-on;
59 regulator-always-on;
64 proc-supply = <&rt5190_buck3>;
68 proc-supply = <&rt5190_buck3>;
72 proc-supply = <&rt5190_buck3>;
76 proc-supply = <&rt5190_buck3>;
80 proc-supply = <&rt5190_buck3>;
91 cpu_trip_active_high: active-high {
97 cpu_trip_active_med: active-med {
103 cpu_trip_active_low: active-low {
110 cooling-maps {
111 map-cpu-active-high {
113 cooling-device = <&fan 3 3>;
117 map-cpu-active-med {
119 cooling-device = <&fan 2 2>;
123 map-cpu-active-low {
125 cooling-device = <&fan 1 1>;
132 pinctrl-names = "default";
133 pinctrl-0 = <&i2c0_pins>;
139 vin2-supply = <&rt5190_buck1>;
140 vin3-supply = <&rt5190_buck1>;
141 vin4-supply = <&rt5190_buck1>;
145 regulator-name = "rt5190a-buck1";
146 regulator-min-microvolt = <5090000>;
147 regulator-max-microvolt = <5090000>;
148 regulator-allowed-modes =
150 regulator-boot-on;
151 regulator-always-on;
154 regulator-name = "vcore";
155 regulator-min-microvolt = <600000>;
156 regulator-max-microvolt = <1400000>;
157 regulator-boot-on;
158 regulator-always-on;
161 regulator-name = "vproc";
162 regulator-min-microvolt = <600000>;
163 regulator-max-microvolt = <1400000>;
164 regulator-boot-on;
167 regulator-name = "rt5190a-buck4";
168 regulator-min-microvolt = <1800000>;
169 regulator-max-microvolt = <1800000>;
170 regulator-allowed-modes =
172 regulator-boot-on;
173 regulator-always-on;
176 regulator-name = "rt5190a-ldo";
177 regulator-min-microvolt = <1800000>;
178 regulator-max-microvolt = <1800000>;
179 regulator-boot-on;
180 regulator-always-on;
187 pinctrl-names = "default";
188 pinctrl-0 = <&i2c2_1_pins>;
191 pca9545: i2c-mux@70 {
194 reset-gpios = <&pio 5 GPIO_ACTIVE_LOW>;
195 #address-cells = <1>;
196 #size-cells = <0>;
199 #address-cells = <1>;
200 #size-cells = <0>;
206 #clock-cells = <0>;
218 #address-cells = <1>;
219 #size-cells = <0>;
235 /* M.2 key-B SIM1 */
240 /* M.2 key-M SSD */
246 i2c0_pins: i2c0-g0-pins {
253 i2c1_pins: i2c1-g0-pins {
260 i2c2_1_pins: i2c2-g1-pins {
267 gbe0_led0_pins: gbe0-led0-pins {
274 gbe1_led0_pins: gbe1-led0-pins {
281 gbe2_led0_pins: gbe2-led0-pins {
288 gbe3_led0_pins: gbe3-led0-pins {
295 i2p5gbe_led0_pins: 2p5gbe-led0-pins {
302 mmc0_pins_emmc_45: mmc0-emmc-45-pins {
309 mmc0_pins_emmc_51: mmc0-emmc-51-pins {
316 mmc0_pins_sdcard: mmc0-sdcard-pins {
323 spi0_flash_pins: spi0-flash-pins {
340 pinctrl-names = "default";
341 pinctrl-0 = <&spi0_flash_pins>;
345 compatible = "spi-nand";
347 spi-max-frequency = <52000000>;
348 spi-tx-bus-width = <4>;
349 spi-rx-bus-width = <4>;
359 compatible = "fixed-partitions";
360 #address-cells = <1>;
361 #size-cells = <1>;
366 read-only;