Lines Matching +full:armada +full:- +full:3700 +full:- +full:spi
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include <dt-bindings/bus/moxtet.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12 #include "armada-372x.dtsi"
16 compatible = "cznic,turris-mox", "marvell,armada3720",
28 stdout-path = "serial0:115200n8";
37 compatible = "gpio-leds";
41 linux,default-trigger = "default-on";
45 gpio-keys {
46 compatible = "gpio-keys";
48 key-reset {
52 debounce-interval = <60>;
56 exp_usb3_vbus: usb3-vbus {
57 compatible = "regulator-fixed";
58 regulator-name = "usb3-vbus";
59 regulator-min-microvolt = <5000000>;
60 regulator-max-microvolt = <5000000>;
61 enable-active-high;
62 regulator-always-on;
66 vsdc_reg: vsdc-reg {
67 compatible = "regulator-gpio";
68 regulator-name = "vsdc";
69 regulator-min-microvolt = <1800000>;
70 regulator-max-microvolt = <3300000>;
71 regulator-boot-on;
74 gpios-states = <0>;
77 enable-active-high;
80 vsdio_reg: vsdio-reg {
81 compatible = "regulator-gpio";
82 regulator-name = "vsdio";
83 regulator-min-microvolt = <1800000>;
84 regulator-max-microvolt = <3300000>;
85 regulator-boot-on;
88 gpios-states = <0>;
91 enable-active-high;
94 sdhci1_pwrseq: sdhci1-pwrseq {
95 compatible = "mmc-pwrseq-simple";
96 reset-gpios = <&gpionb 19 GPIO_ACTIVE_HIGH>;
102 i2c-bus = <&i2c0>;
103 los-gpios = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
104 tx-fault-gpios = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
105 mod-def0-gpios = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
106 tx-disable-gpios = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
107 rate-select0-gpios = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
108 maximum-power-milliwatt = <3000>;
110 /* enabled by U-Boot if SFP module is present */
115 armada-3700-rwtm {
116 compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
122 pinctrl-names = "default";
123 pinctrl-0 = <&i2c1_pins>;
124 clock-frequency = <100000>;
125 /delete-property/ mrvl,i2c-fast-mode;
128 /* MCP7940MT-I/MNY RTC */
132 interrupt-parent = <&gpiosb>;
138 pinctrl-names = "default";
139 pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
141 reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
142 slot-power-limit-milliwatt = <10000>;
144 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
149 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
152 * This bug is not present in U-Boot ports for other Armada 3700 devices and is fixed in
153 * U-Boot version 2021.07. See relevant U-Boot commits (the last one contains fix):
154 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
155 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
156 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
158 * in U-Boot version 2022.04 by following commit:
159 * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17
161 #address-cells = <3>;
162 #size-cells = <2>;
166 /* enabled by U-Boot if PCIe module is present */
175 pinctrl-names = "default";
176 pinctrl-0 = <&rgmii_pins>;
177 phy-mode = "rgmii-id";
178 phy-handle = <&phy1>;
183 phy-mode = "2500base-x";
184 managed = "in-band-status";
189 wp-inverted;
190 bus-width = <4>;
191 cd-gpios = <&gpionb 10 GPIO_ACTIVE_HIGH>;
192 vqmmc-supply = <&vsdc_reg>;
193 marvell,pad-type = "sd";
198 pinctrl-names = "default";
199 pinctrl-0 = <&sdio_pins>;
200 non-removable;
201 bus-width = <4>;
202 marvell,pad-type = "sd";
203 vqmmc-supply = <&vsdio_reg>;
204 mmc-pwrseq = <&sdhci1_pwrseq>;
206 sdhci-caps-mask = <0x2 0x0>;
212 pinctrl-names = "default";
213 pinctrl-0 = <&spi_quad_pins &spi_cs1_pins>;
214 assigned-clocks = <&nb_periph_clk 7>;
215 assigned-clock-parents = <&tbg 1>;
216 assigned-clock-rates = <20000000>;
219 compatible = "jedec,spi-nor";
221 spi-max-frequency = <20000000>;
224 compatible = "fixed-partitions";
225 #address-cells = <1>;
226 #size-cells = <1>;
229 label = "secure-firmware";
234 label = "a53-firmware";
239 label = "u-boot-env";
256 #address-cells = <1>;
257 #size-cells = <0>;
260 reset-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
261 spi-max-frequency = <10000000>;
262 spi-cpol;
263 spi-cpha;
264 interrupt-controller;
265 #interrupt-cells = <1>;
266 interrupt-parent = <&gpiosb>;
271 compatible = "cznic,moxtet-gpio";
272 gpio-controller;
273 #gpio-cells = <2>;
286 compatible = "usb-a-connector";
287 phy-supply = <&exp_usb3_vbus>;
297 pinctrl-names = "default";
298 pinctrl-0 = <&smi_pins>;
301 phy1: ethernet-phy@1 {
306 * NOTE: switch nodes are enabled by U-Boot if modules are present
308 * conventions! Deployed U-Boot binaries are explicitly looking for
313 compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
316 interrupt-parent = <&moxtet>;
321 #address-cells = <1>;
322 #size-cells = <0>;
324 switch0phy1: ethernet-phy@1 {
328 switch0phy2: ethernet-phy@2 {
332 switch0phy3: ethernet-phy@3 {
336 switch0phy4: ethernet-phy@4 {
340 switch0phy5: ethernet-phy@5 {
344 switch0phy6: ethernet-phy@6 {
348 switch0phy7: ethernet-phy@7 {
352 switch0phy8: ethernet-phy@8 {
358 #address-cells = <1>;
359 #size-cells = <0>;
364 phy-handle = <&switch0phy1>;
370 phy-handle = <&switch0phy2>;
376 phy-handle = <&switch0phy3>;
382 phy-handle = <&switch0phy4>;
388 phy-handle = <&switch0phy5>;
394 phy-handle = <&switch0phy6>;
400 phy-handle = <&switch0phy7>;
406 phy-handle = <&switch0phy8>;
413 phy-mode = "2500base-x";
414 managed = "in-band-status";
420 phy-mode = "2500base-x";
421 managed = "in-band-status";
426 port-sfp@a {
430 phy-mode = "sgmii";
431 managed = "in-band-status";
439 compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
442 interrupt-parent = <&moxtet>;
447 #address-cells = <1>;
448 #size-cells = <0>;
450 switch0phy1_topaz: ethernet-phy@11 {
454 switch0phy2_topaz: ethernet-phy@12 {
458 switch0phy3_topaz: ethernet-phy@13 {
462 switch0phy4_topaz: ethernet-phy@14 {
468 #address-cells = <1>;
469 #size-cells = <0>;
474 phy-handle = <&switch0phy1_topaz>;
480 phy-handle = <&switch0phy2_topaz>;
486 phy-handle = <&switch0phy3_topaz>;
492 phy-handle = <&switch0phy4_topaz>;
498 phy-mode = "2500base-x";
499 managed = "in-band-status";
507 compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
510 interrupt-parent = <&moxtet>;
515 #address-cells = <1>;
516 #size-cells = <0>;
518 switch1phy1: ethernet-phy@1 {
522 switch1phy2: ethernet-phy@2 {
526 switch1phy3: ethernet-phy@3 {
530 switch1phy4: ethernet-phy@4 {
534 switch1phy5: ethernet-phy@5 {
538 switch1phy6: ethernet-phy@6 {
542 switch1phy7: ethernet-phy@7 {
546 switch1phy8: ethernet-phy@8 {
552 #address-cells = <1>;
553 #size-cells = <0>;
558 phy-handle = <&switch1phy1>;
564 phy-handle = <&switch1phy2>;
570 phy-handle = <&switch1phy3>;
576 phy-handle = <&switch1phy4>;
582 phy-handle = <&switch1phy5>;
588 phy-handle = <&switch1phy6>;
594 phy-handle = <&switch1phy7>;
600 phy-handle = <&switch1phy8>;
606 phy-mode = "2500base-x";
607 managed = "in-band-status";
614 phy-mode = "2500base-x";
615 managed = "in-band-status";
620 port-sfp@a {
624 phy-mode = "sgmii";
625 managed = "in-band-status";
633 compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
636 interrupt-parent = <&moxtet>;
641 #address-cells = <1>;
642 #size-cells = <0>;
644 switch1phy1_topaz: ethernet-phy@11 {
648 switch1phy2_topaz: ethernet-phy@12 {
652 switch1phy3_topaz: ethernet-phy@13 {
656 switch1phy4_topaz: ethernet-phy@14 {
662 #address-cells = <1>;
663 #size-cells = <0>;
668 phy-handle = <&switch1phy1_topaz>;
674 phy-handle = <&switch1phy2_topaz>;
680 phy-handle = <&switch1phy3_topaz>;
686 phy-handle = <&switch1phy4_topaz>;
692 phy-mode = "2500base-x";
693 managed = "in-band-status";
701 compatible = "marvell,turris-mox-mv88e6190", "marvell,mv88e6190";
704 interrupt-parent = <&moxtet>;
709 #address-cells = <1>;
710 #size-cells = <0>;
712 switch2phy1: ethernet-phy@1 {
716 switch2phy2: ethernet-phy@2 {
720 switch2phy3: ethernet-phy@3 {
724 switch2phy4: ethernet-phy@4 {
728 switch2phy5: ethernet-phy@5 {
732 switch2phy6: ethernet-phy@6 {
736 switch2phy7: ethernet-phy@7 {
740 switch2phy8: ethernet-phy@8 {
746 #address-cells = <1>;
747 #size-cells = <0>;
752 phy-handle = <&switch2phy1>;
758 phy-handle = <&switch2phy2>;
764 phy-handle = <&switch2phy3>;
770 phy-handle = <&switch2phy4>;
776 phy-handle = <&switch2phy5>;
782 phy-handle = <&switch2phy6>;
788 phy-handle = <&switch2phy7>;
794 phy-handle = <&switch2phy8>;
800 phy-mode = "2500base-x";
801 managed = "in-band-status";
805 port-sfp@a {
809 phy-mode = "sgmii";
810 managed = "in-band-status";
818 compatible = "marvell,turris-mox-mv88e6085", "marvell,mv88e6085";
821 interrupt-parent = <&moxtet>;
826 #address-cells = <1>;
827 #size-cells = <0>;
829 switch2phy1_topaz: ethernet-phy@11 {
833 switch2phy2_topaz: ethernet-phy@12 {
837 switch2phy3_topaz: ethernet-phy@13 {
841 switch2phy4_topaz: ethernet-phy@14 {
847 #address-cells = <1>;
848 #size-cells = <0>;
853 phy-handle = <&switch2phy1_topaz>;
859 phy-handle = <&switch2phy2_topaz>;
865 phy-handle = <&switch2phy3_topaz>;
871 phy-handle = <&switch2phy4_topaz>;
877 phy-mode = "2500base-x";
878 managed = "in-band-status";