Lines Matching +full:uart0 +full:- +full:default +full:- +full:state

1 // SPDX-License-Identifier: GPL-2.0
5  * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
8 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
12 #include "poplar-pinctrl.dtsi"
16 	compatible = "hisilicon,hi3798cv200-poplar", "hisilicon,hi3798cv200";
19 		serial0 = &uart0;
24 		stdout-path = "serial0:115200n8";
33 		compatible = "gpio-leds";
35 		user-led0 {
38 			linux,default-trigger = "heartbeat";
39 			default-state = "off";
42 		user-led1 {
45 			linux,default-trigger = "mmc0";
46 			default-state = "off";
49 		user-led2 {
52 			linux,default-trigger = "mmc1";
53 			default-state = "off";
56 		user-led3 {
59 			linux,default-trigger = "none";
60 			panic-indicator;
61 			default-state = "off";
65 	reg_pcie: regulator-pcie {
66 		compatible = "regulator-fixed";
67 		regulator-name = "3V3_PCIE0";
68 		regulator-min-microvolt = <3300000>;
69 		regulator-max-microvolt = <3300000>;
71 		enable-active-high;
80 	pinctrl-names = "default";
81 	pinctrl-0 = <&emmc_pins_1 &emmc_pins_2
83 	fifo-depth = <256>;
84 	clock-frequency = <200000000>;
85 	cap-mmc-highspeed;
86 	mmc-ddr-1_8v;
87 	mmc-hs200-1_8v;
88 	non-removable;
89 	bus-width = <8>;
95 	#address-cells = <1>;
96 	#size-cells = <0>;
97 	phy-handle = <&eth_phy1>;
98 	phy-mode = "rgmii";
99 	hisilicon,phy-reset-delays-us = <10000 10000 30000>;
108 	gpio-line-names = "GPIO-E",	"",
110 			  "",		"GPIO-F",
111 			  "",		"GPIO-J";
116 	gpio-line-names = "GPIO-H",	"GPIO-I",
117 			  "GPIO-L",	"GPIO-G",
118 			  "GPIO-K",	"",
124 	gpio-line-names = "",		"",
126 			  "GPIO-C",	"",
127 			  "",		"GPIO-B";
132 	gpio-line-names = "",		"",
134 			  "",		"GPIO-D",
140 	gpio-line-names = "",		"USER-LED-1",
141 			  "USER-LED-2",	"",
142 			  "",		"GPIO-A",
148 	gpio-line-names = "",		"",
149 			  "",		"USER-LED-0",
156 	gpio-line-names = "",		"",
159 			  "USER-LED-3",	"";
164 	label = "LS-I2C0";
169 	label = "LS-I2C1";
173 	linux,rc-map-name = "rc-hisi-poplar";
182 	reset-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
183 	vpcie-supply = <&reg_pcie>;
188 	bus-width = <4>;
189 	cap-sd-highspeed;
195 	label = "LS-SPI0";
198 &uart0 {
204 	label = "LS-UART0";
206 /* No optional LS-UART1 on Low Speed Expansion Connector. */