Lines Matching +full:eee +full:- +full:broken +full:- +full:100 +full:tx
1 // SPDX-License-Identifier: (GPL-2.0-only OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/usb/pd.h>
13 compatible = "fsl,imx93-9x9-qsb", "fsl,imx93";
16 stdout-path = &lpuart1;
19 reserved-memory {
20 #address-cells = <2>;
21 #size-cells = <2>;
25 compatible = "shared-dma-pool";
28 linux,cma-default;
33 no-map;
38 no-map;
43 no-map;
48 no-map;
51 rsc_table: rsc-table@2021e000 {
53 no-map;
57 compatible = "shared-dma-pool";
59 no-map;
64 reg_vref_1v8: regulator-adc-vref {
65 compatible = "regulator-fixed";
66 regulator-name = "VREF_1V8";
67 regulator-min-microvolt = <1800000>;
68 regulator-max-microvolt = <1800000>;
71 reg_rpi_3v3: regulator-rpi {
72 compatible = "regulator-fixed";
73 regulator-name = "VDD_RPI_3V3";
74 regulator-min-microvolt = <3300000>;
75 regulator-max-microvolt = <3300000>;
77 enable-active-high;
80 reg_usdhc2_vmmc: regulator-usdhc2 {
81 compatible = "regulator-fixed";
82 pinctrl-names = "default";
83 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
84 regulator-name = "VSD_3V3";
85 regulator-min-microvolt = <3300000>;
86 regulator-max-microvolt = <3300000>;
88 enable-active-high;
89 off-on-delay-us = <12000>;
94 vref-supply = <®_vref_1v8>;
99 mbox-names = "tx", "rx", "rxdb";
103 memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
109 pinctrl-names = "default";
110 pinctrl-0 = <&pinctrl_eqos>;
111 phy-mode = "rgmii-id";
112 phy-handle = <ðphy1>;
116 compatible = "snps,dwmac-mdio";
117 #address-cells = <1>;
118 #size-cells = <0>;
119 clock-frequency = <5000000>;
121 ethphy1: ethernet-phy@1 {
122 compatible = "ethernet-phy-ieee802.3-c22";
124 eee-broken-1000t;
125 reset-gpios = <&pcal6524 15 GPIO_ACTIVE_LOW>;
126 reset-assert-us = <10000>;
127 reset-deassert-us = <80000>;
128 realtek,clkout-disable;
134 clock-frequency = <400000>;
135 pinctrl-names = "default";
136 pinctrl-0 = <&pinctrl_lpi2c1>;
142 interrupt-parent = <&gpio3>;
146 compatible = "usb-c-connector";
147 label = "USB-C";
148 power-role = "dual";
149 data-role = "dual";
150 try-power-role = "sink";
151 source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
152 sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
154 op-sink-microwatt = <15000000>;
155 self-powered;
158 #address-cells = <1>;
159 #size-cells = <0>;
165 remote-endpoint = <&usb1_drd_sw>;
175 interrupt-parent = <&pcal6524>;
181 clock-frequency = <400000>;
182 pinctrl-names = "default";
183 pinctrl-0 = <&pinctrl_lpi2c2>;
189 gpio-controller;
190 #gpio-cells = <2>;
191 interrupt-controller;
192 #interrupt-cells = <2>;
193 interrupt-parent = <&gpio3>;
195 pinctrl-names = "default";
196 pinctrl-0 = <&pinctrl_pcal6524>;
202 interrupt-parent = <&pcal6524>;
207 regulator-name = "BUCK1";
208 regulator-min-microvolt = <650000>;
209 regulator-max-microvolt = <2237500>;
210 regulator-boot-on;
211 regulator-always-on;
212 regulator-ramp-delay = <3125>;
216 regulator-name = "BUCK2";
217 regulator-min-microvolt = <600000>;
218 regulator-max-microvolt = <2187500>;
219 regulator-boot-on;
220 regulator-always-on;
221 regulator-ramp-delay = <3125>;
225 regulator-name = "BUCK4";
226 regulator-min-microvolt = <600000>;
227 regulator-max-microvolt = <3400000>;
228 regulator-boot-on;
229 regulator-always-on;
233 regulator-name = "BUCK5";
234 regulator-min-microvolt = <600000>;
235 regulator-max-microvolt = <3400000>;
236 regulator-boot-on;
237 regulator-always-on;
241 regulator-name = "BUCK6";
242 regulator-min-microvolt = <600000>;
243 regulator-max-microvolt = <3400000>;
244 regulator-boot-on;
245 regulator-always-on;
249 regulator-name = "LDO1";
250 regulator-min-microvolt = <1600000>;
251 regulator-max-microvolt = <3300000>;
252 regulator-boot-on;
253 regulator-always-on;
257 regulator-name = "LDO4";
258 regulator-min-microvolt = <800000>;
259 regulator-max-microvolt = <3300000>;
260 regulator-boot-on;
261 regulator-always-on;
265 regulator-name = "LDO5";
266 regulator-min-microvolt = <1800000>;
267 regulator-max-microvolt = <3300000>;
268 regulator-boot-on;
269 regulator-always-on;
276 pinctrl-names = "default";
277 pinctrl-0 = <&pinctrl_uart1>;
291 hnp-disable;
292 srp-disable;
293 adp-disable;
294 usb-role-switch;
295 disable-over-current;
296 samsung,picophy-pre-emp-curr-control = <3>;
297 samsung,picophy-dc-vol-level-adjust = <7>;
302 remote-endpoint = <&typec1_dr_sw>;
308 pinctrl-names = "default", "state_100mhz", "state_200mhz";
309 pinctrl-0 = <&pinctrl_usdhc1>;
310 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
311 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
312 bus-width = <8>;
313 non-removable;
318 pinctrl-names = "default", "state_100mhz", "state_200mhz";
319 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
320 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
321 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
322 cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
323 vmmc-supply = <®_usdhc2_vmmc>;
324 bus-width = <4>;
325 no-mmc;
407 pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
424 pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
466 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
479 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {