Lines Matching +full:aux +full:- +full:devs

1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
6 /dts-v1/;
8 #include "imx8mq-zii-ultra.dtsi"
12 compatible = "zii,imx8mq-ultra-rmb3", "zii,imx8mq-ultra", "fsl,imx8mq";
15 compatible = "simple-audio-card";
16 simple-audio-card,name = "front";
17 simple-audio-card,format = "i2s";
18 simple-audio-card,bitclock-master = <&sound1_codec>;
19 simple-audio-card,frame-master = <&sound1_codec>;
20 simple-audio-card,widgets =
22 simple-audio-card,routing =
27 simple-audio-card,aux-devs = <&hpa1>;
29 sound1_cpu: simple-audio-card,cpu {
30 sound-dai = <&sai2>;
33 sound1_codec: simple-audio-card,codec {
34 sound-dai = <&codec1>;
40 compatible = "simple-audio-card";
41 simple-audio-card,name = "periph";
42 simple-audio-card,format = "i2s";
43 simple-audio-card,bitclock-master = <&sound2_codec>;
44 simple-audio-card,frame-master = <&sound2_codec>;
45 simple-audio-card,widgets =
47 simple-audio-card,routing =
52 simple-audio-card,aux-devs = <&hpa2>;
54 sound2_cpu: simple-audio-card,cpu {
55 sound-dai = <&sai3>;
58 sound2_codec: simple-audio-card,codec {
59 sound-dai = <&codec2>;
66 pinctrl-names = "default";
67 pinctrl-0 = <&pinctrl_ecspi1>;
68 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
70 #address-cells = <1>;
71 #size-cells = <0>;
74 compatible = "st,n25q128a13", "jedec,spi-nor";
75 spi-max-frequency = <20000000>;
81 sound-name-prefix = "HPA1";
87 pinctrl-names = "default";
88 pinctrl-0 = <&pinctrl_codec2>;
90 #sound-dai-cells = <0>;
91 HPVDD-supply = <&reg_gen_3p3>;
92 SPRVDD-supply = <&reg_gen_3p3>;
93 SPLVDD-supply = <&reg_gen_3p3>;
94 AVDD-supply = <&reg_gen_3p3>;
95 IOVDD-supply = <&reg_gen_3p3>;
96 DVDD-supply = <&vgen4_reg>;
97 reset-gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
102 temp-sense@48 {
110 compatible = "syna,rmi4-i2c";
111 pinctrl-names = "default";
112 pinctrl-0 = <&pinctrl_ts>;
114 interrupt-parent = <&gpio1>;
117 #address-cells = <1>;
118 #size-cells = <0>;
120 rmi4-f01@1 {
122 syna,nosleep-mode = <2>;
125 rmi4-f11@11 {
127 touchscreen-inverted-x;
128 touchscreen-swapped-x-y;
129 syna,sensor-type = <1>;
130 syna,delta-x-threshold = <5>;
131 syna,delta-y-threshold = <10>;
134 rmi4-f12@12 {
136 touchscreen-inverted-x;
137 touchscreen-swapped-x-y;
138 syna,sensor-type = <1>;
144 pinctrl-names = "default";
145 pinctrl-0 = <&pinctrl_ts>;
147 interrupt-parent = <&gpio1>;
149 touchscreen-inverted-x;
150 touchscreen-swapped-x-y;
156 pinctrl-names = "default";
157 pinctrl-0 = <&pinctrl_sai3>;
162 swap-dx-lanes = <0>;