Lines Matching +full:imx8mq +full:- +full:reset
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/input/input.h>
9 #include "imx8mq.dtsi"
13 compatible = "boundary,imx8mq-nitrogen8m", "fsl,imx8mq";
16 stdout-path = "serial0:115200n8";
24 gpio-keys {
25 compatible = "gpio-keys";
26 pinctrl-names = "default";
27 pinctrl-0 = <&pinctrl_gpio_keys>;
29 button-power {
33 wakeup-source;
37 hdmi-connector {
38 compatible = "hdmi-connector";
39 ddc-i2c-bus = <&ddc_i2c_bus>;
45 remote-endpoint = <<8912_out>;
50 reg_usb_otg_vbus: regulator-usb-otg-vbus {
51 compatible = "regulator-fixed";
52 pinctrl-names = "default";
53 pinctrl-0 = <&pinctrl_reg_usbotg_vbus>;
54 regulator-name = "usb_otg_vbus";
55 regulator-min-microvolt = <5000000>;
56 regulator-max-microvolt = <5000000>;
58 enable-active-high;
61 reg_vref_0v9: regulator-vref-0v9 {
62 compatible = "regulator-fixed";
63 regulator-name = "vref-0v9";
64 regulator-min-microvolt = <900000>;
65 regulator-max-microvolt = <900000>;
68 reg_vref_1v8: regulator-vref-1v8 {
69 compatible = "regulator-fixed";
70 regulator-name = "vref-1v8";
71 regulator-min-microvolt = <1800000>;
72 regulator-max-microvolt = <1800000>;
75 reg_vref_2v5: regulator-vref-2v5 {
76 compatible = "regulator-fixed";
77 regulator-name = "vref-2v5";
78 regulator-min-microvolt = <2500000>;
79 regulator-max-microvolt = <2500000>;
82 reg_vref_3v3: regulator-vref-3v3 {
83 compatible = "regulator-fixed";
84 regulator-name = "vref-3v3";
85 regulator-min-microvolt = <3300000>;
86 regulator-max-microvolt = <3300000>;
89 reg_vref_5v: regulator-vref-5v {
90 compatible = "regulator-fixed";
91 regulator-name = "vref-5v";
92 regulator-min-microvolt = <5000000>;
93 regulator-max-microvolt = <5000000>;
102 pinctrl-names = "default";
103 pinctrl-0 = <&pinctrl_fec1>;
104 phy-mode = "rgmii-id";
105 phy-handle = <ðphy0>;
106 fsl,magic-packet;
110 #address-cells = <1>;
111 #size-cells = <0>;
113 ethphy0: ethernet-phy@4 {
114 compatible = "ethernet-phy-ieee802.3-c22";
116 interrupts-extended = <&gpio1 11 IRQ_TYPE_LEVEL_LOW>;
121 /* Release reset of the USB Host HUB */
123 usb-host-reset-hog {
124 gpio-hog;
126 output-high;
131 clock-frequency = <400000>;
132 pinctrl-names = "default";
133 pinctrl-0 = <&pinctrl_i2c1>;
136 i2c-mux@70 {
138 pinctrl-names = "default";
139 pinctrl-0 = <&pinctrl_i2c1_pca9546>;
141 reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
142 #address-cells = <1>;
143 #size-cells = <0>;
147 #address-cells = <1>;
148 #size-cells = <0>;
152 pinctrl-names = "default";
153 pinctrl-0 = <&pinctrl_reg_arm_dram>;
155 regulator-min-microvolt = <900000>;
156 regulator-max-microvolt = <1000000>;
157 regulator-always-on;
158 vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
164 #address-cells = <1>;
165 #size-cells = <0>;
169 pinctrl-names = "default";
170 pinctrl-0 = <&pinctrl_reg_dram_1p1v>;
172 regulator-min-microvolt = <1100000>;
173 regulator-max-microvolt = <1100000>;
174 regulator-always-on;
175 vsel-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
181 #address-cells = <1>;
182 #size-cells = <0>;
186 pinctrl-names = "default";
187 pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>;
189 regulator-min-microvolt = <900000>;
190 regulator-max-microvolt = <1000000>;
191 regulator-always-on;
192 vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
198 #address-cells = <1>;
199 #size-cells = <0>;
203 pinctrl-names = "default";
204 pinctrl-0 = <&pinctrl_i2c1d_rv4162>;
206 interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>;
207 wakeup-source;
214 clock-frequency = <100000>;
215 pinctrl-names = "default";
216 pinctrl-0 = <&pinctrl_i2c4>;
219 pca9546: i2c-mux@70 {
222 #address-cells = <1>;
223 #size-cells = <0>;
227 #address-cells = <1>;
228 #size-cells = <0>;
229 clock-frequency = <100000>;
231 hdmi-bridge@48 {
234 reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>;
237 #address-cells = <1>;
238 #size-cells = <0>;
244 data-lanes = <1 2 3 4>;
245 remote-endpoint = <&mipi_dsi_out>;
253 remote-endpoint = <&hdmi_connector_in>;
262 #address-cells = <1>;
263 #size-cells = <0>;
264 clock-frequency = <100000>;
269 #address-cells = <1>;
270 #size-cells = <0>;
271 clock-frequency = <100000>;
273 max7323: gpio-expander@68 {
275 pinctrl-names = "default";
276 pinctrl-0 = <&pinctrl_max7323>;
277 gpio-controller;
279 #gpio-cells = <2>;
290 #address-cells = <1>;
291 #size-cells = <0>;
299 remote-endpoint = <&hdmi_out_in>;
306 pinctrl-names = "default";
307 pinctrl-0 = <&pinctrl_uart1>;
308 assigned-clocks = <&clk IMX8MQ_CLK_UART1>;
309 assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
314 pinctrl-names = "default";
315 pinctrl-0 = <&pinctrl_uart2>;
316 assigned-clocks = <&clk IMX8MQ_CLK_UART2>;
317 assigned-clock-parents = <&clk IMX8MQ_CLK_25M>;
323 pinctrl-names = "default";
324 pinctrl-0 = <&pinctrl_usb3_0>;
329 vbus-supply = <®_usb_otg_vbus>;
339 pinctrl-names = "default";
340 pinctrl-0 = <&pinctrl_usb3_1>;
345 assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
346 assigned-clock-rates = <400000000>;
347 bus-width = <8>;
348 pinctrl-names = "default";
349 pinctrl-0 = <&pinctrl_usdhc1>;
350 non-removable;
351 vmmc-supply = <®_vref_1v8>;
356 pinctrl-names = "default";
357 pinctrl-0 = <&pinctrl_wdog>;
358 fsl,ext-reset-output;
363 pinctrl-names = "default";
364 pinctrl-0 = <&pinctrl_hog>;
449 pinctrl_gpio_keys: gpio-keysgrp {
463 pinctrl_i2c1_pca9546: i2c1-pca9546grp {
469 pinctrl_i2c1d_rv4162: i2c1d-rv4162grp {
488 pinctrl_reg_arm_dram: reg-arm-dramgrp {
494 pinctrl_reg_dram_1p1v: reg-dram-1p1vgrp {
500 pinctrl_reg_soc_gpu_vpu: reg-soc-gpu-vpugrp {
506 pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp {
526 pinctrl_usb3_0: usb3-0grp {
532 pinctrl_usb3_1: usb3-1grp {
554 pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
569 pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {