Lines Matching +full:vin +full:- +full:mode +full:- +full:microvolt
1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
5 #include <dt-bindings/leds/common.h>
26 compatible = "pwm-backlight";
27 pinctrl-0 = <&pinctrl_backlight>;
29 power-supply = <®_24v>;
30 enable-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
31 brightness-levels = <0 255>;
32 num-interpolated-steps = <17>;
33 default-brightness-level = <8>;
38 compatible = "gpio-leds";
39 pinctrl-names = "default";
40 pinctrl-0 = <&pinctrl_gpio_led>;
42 led-0 {
47 default-state = "on";
48 linux,default-trigger = "heartbeat";
51 led-1 {
55 default-state = "off";
58 led-2 {
62 default-state = "on";
66 reg_1v2: regulator-1v2 {
67 compatible = "regulator-fixed";
68 vin-supply = <®_5v_p>;
69 regulator-name = "1V2";
70 regulator-min-microvolt = <1200000>;
71 regulator-max-microvolt = <1200000>;
74 reg_2v5: regulator-2v5 {
75 compatible = "regulator-fixed";
76 vin-supply = <®_5v_s>;
77 regulator-name = "2V5";
78 regulator-min-microvolt = <2500000>;
79 regulator-max-microvolt = <2500000>;
82 reg_3v3: regulator-3v3 {
83 compatible = "regulator-fixed";
84 vin-supply = <®_5v_s>;
85 regulator-name = "3V3";
86 regulator-min-microvolt = <3300000>;
87 regulator-max-microvolt = <3300000>;
94 reg_5v_p: regulator-5v-p {
95 compatible = "regulator-fixed";
96 regulator-name = "5V_P";
97 vin-supply = <®_24v>;
98 regulator-min-microvolt = <5000000>;
99 regulator-max-microvolt = <5000000>;
106 reg_5v_s: regulator-5v-s {
107 compatible = "regulator-fixed";
108 regulator-name = "5V_S";
109 vin-supply = <®_24v>;
110 regulator-min-microvolt = <5000000>;
111 regulator-max-microvolt = <5000000>;
114 reg_24v: regulator-24v {
115 compatible = "regulator-fixed";
116 regulator-name = "24V";
117 regulator-min-microvolt = <24000000>;
118 regulator-max-microvolt = <24000000>;
121 reg_can2rs: regulator-can2rs {
122 compatible = "regulator-fixed";
123 regulator-name = "CAN2RS";
124 pinctrl-names = "default";
125 pinctrl-0 = <&pinctrl_can2rs>;
126 regulator-min-microvolt = <3300000>;
127 regulator-max-microvolt = <3300000>;
131 reg_canrs: regulator-canrs {
132 compatible = "regulator-fixed";
133 regulator-name = "CANRS";
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_canrs>;
136 regulator-min-microvolt = <3300000>;
137 regulator-max-microvolt = <3300000>;
141 reg_tft_vcom: regulator-tft-vcom {
142 compatible = "pwm-regulator";
144 regulator-name = "VCOM";
145 vin-supply = <®_5v_s>;
146 regulator-min-microvolt = <3600000>;
147 regulator-max-microvolt = <3600000>;
148 regulator-always-on;
149 voltage-table = <3600000 26>;
153 reg_vsd_3v3: regulator-vsd-3v3 {
154 pinctrl-names = "default";
155 pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
156 vin-supply = <®_vdd_3v3>;
157 compatible = "regulator-fixed";
158 regulator-name = "VSD_3V3";
159 regulator-min-microvolt = <3300000>;
160 regulator-max-microvolt = <3300000>;
162 enable-active-high;
167 cpu-supply = <®_vdd_arm>;
171 cpu-supply = <®_vdd_arm>;
175 cpu-supply = <®_vdd_arm>;
179 cpu-supply = <®_vdd_arm>;
183 pinctrl-names = "default";
184 pinctrl-0 = <&pinctrl_ecspi2>;
185 cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
191 vref-supply = <®_vdd_3v3>;
192 spi-max-frequency = <1000000>;
193 #io-channel-cells = <1>;
198 pinctrl-names = "default";
199 pinctrl-0 = <&pinctrl_eqos>;
200 phy-mode = "rgmii-txid";
203 fixed-link {
205 full-duplex;
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_flexcan1>;
212 xceiver-supply = <®_canrs>;
217 pinctrl-names = "default";
218 pinctrl-0 = <&pinctrl_flexcan2>;
219 xceiver-supply = <®_can2rs>;
224 clock-frequency = <100000>;
225 pinctrl-names = "default";
226 pinctrl-0 = <&pinctrl_i2c1>;
232 pinctrl-names = "default";
233 pinctrl-0 = <&pinctrl_pmic>;
234 interrupts-extended = <&gpio1 3 IRQ_TYPE_EDGE_RISING>;
235 sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
239 regulator-name = "VDD_SOC";
240 regulator-min-microvolt = <600000>;
241 regulator-max-microvolt = <2187500>;
242 vin-supply = <®_5v_p>;
243 regulator-boot-on;
244 regulator-always-on;
245 regulator-ramp-delay = <3125>;
249 regulator-name = "VDD_ARM";
250 regulator-min-microvolt = <600000>;
251 regulator-max-microvolt = <2187500>;
252 vin-supply = <®_5v_p>;
253 regulator-boot-on;
254 regulator-always-on;
255 regulator-ramp-delay = <3125>;
256 nxp,dvs-run-voltage = <950000>;
257 nxp,dvs-standby-voltage = <850000>;
261 regulator-name = "VDD_3V3";
262 regulator-min-microvolt = <600000>;
263 regulator-max-microvolt = <3400000>;
264 vin-supply = <®_5v_p>;
265 regulator-boot-on;
266 regulator-always-on;
270 regulator-name = "VDD_1V8";
271 regulator-min-microvolt = <600000>;
272 regulator-max-microvolt = <3400000>;
273 vin-supply = <®_5v_p>;
274 regulator-boot-on;
275 regulator-always-on;
279 regulator-name = "NVCC_DRAM_1V1";
280 regulator-min-microvolt = <600000>;
281 regulator-max-microvolt = <3400000>;
282 vin-supply = <®_5v_p>;
283 regulator-boot-on;
284 regulator-always-on;
288 regulator-name = "NVCC_SNVS_1V8";
289 regulator-min-microvolt = <1600000>;
290 regulator-max-microvolt = <3300000>;
291 vin-supply = <®_5v_p>;
292 regulator-boot-on;
293 regulator-always-on;
297 regulator-name = "VDDA_1V8";
298 regulator-min-microvolt = <800000>;
299 regulator-max-microvolt = <3300000>;
300 vin-supply = <®_5v_p>;
301 regulator-boot-on;
302 regulator-always-on;
306 regulator-name = "NVCC_SD2";
307 regulator-min-microvolt = <1800000>;
308 regulator-max-microvolt = <3300000>;
309 vin-supply = <®_5v_p>;
310 regulator-boot-on;
311 regulator-always-on;
318 clock-frequency = <100000>;
319 pinctrl-names = "default";
320 pinctrl-0 = <&pinctrl_i2c3>;
326 pinctrl-names = "default";
327 pinctrl-0 = <&pinctrl_rtc>;
328 interrupts-extended = <&gpio4 31 IRQ_TYPE_EDGE_FALLING>;
329 quartz-load-femtofarads = <12500>;
334 clock-frequency = <380000>;
335 pinctrl-names = "default";
336 pinctrl-0 = <&pinctrl_i2c4>;
341 pinctrl-names = "default";
342 pinctrl-0 = <&pinctrl_switch>;
343 reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
346 ethernet-ports {
347 #address-cells = <1>;
348 #size-cells = <0>;
352 phy-mode = "internal";
358 phy-mode = "internal";
366 phy-mode = "rgmii";
368 tx-internal-delay-ps = <2000>;
369 rx-internal-delay-ps = <0>;
371 fixed-link {
373 full-duplex;
381 pinctrl-names = "default";
382 pinctrl-0 = <&pinctrl_pwm1>;
386 pinctrl-names = "default";
387 pinctrl-0 = <&pinctrl_pwm4>;
391 pinctrl-names = "default";
392 pinctrl-0 = <&pinctrl_uart1>;
398 pinctrl-names = "default";
399 pinctrl-0 = <&pinctrl_uart2>;
412 vbus-supply = <®_3v3>;
417 vbus-supply = <®_3v3>;
431 pinctrl-names = "default", "state_100mhz", "state_200mhz";
432 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
433 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
434 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
435 vmmc-supply = <®_vsd_3v3>;
436 vqmmc-supply = <®_nvcc_sd2>;
437 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
438 wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
439 bus-width = <4>;
445 assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
446 assigned-clock-rates = <400000000>;
447 pinctrl-names = "default", "state_100mhz", "state_200mhz";
448 pinctrl-0 = <&pinctrl_usdhc3>;
449 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
450 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
451 vmmc-supply = <®_vdd_3v3>;
452 vqmmc-supply = <®_vdd_1v8>;
453 bus-width = <8>;
454 no-sd;
455 no-sdio;
456 non-removable;
461 pinctrl-names = "default";
462 pinctrl-0 = <&pinctrl_wdog>;
463 fsl,ext-reset-output;
629 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
640 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
674 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
690 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {