Lines Matching +full:sda +full:- +full:gpios
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
11 compatible = "boundary,imx8mp-nitrogen-som", "fsl,imx8mp";
13 rfkill-bt {
14 compatible = "rfkill-gpio";
15 label = "rfkill-bluetooth";
16 pinctrl-names = "default";
17 pinctrl-0 = <&pinctrl_rfkill_bt>;
18 radio-type = "bluetooth";
19 shutdown-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
22 rfkill-wlan {
23 compatible = "rfkill-gpio";
24 label = "rfkill-wlan";
25 pinctrl-names = "default";
26 pinctrl-0 = <&pinctrl_rfkill_wlan>;
27 radio-type = "wlan";
28 shutdown-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
33 cpu-supply = <&buck2>;
37 cpu-supply = <&buck2>;
41 cpu-supply = <&buck2>;
45 cpu-supply = <&buck2>;
49 phy-handle = <ðphy0>;
50 phy-mode = "rgmii-id";
51 pinctrl-names = "default";
52 pinctrl-0 = <&pinctrl_eqos>;
56 compatible = "snps,dwmac-mdio";
57 #address-cells = <1>;
58 #size-cells = <0>;
60 ethphy0: ethernet-phy@4 {
61 compatible = "ethernet-phy-ieee802.3-c22";
63 eee-broken-1000t;
69 clock-frequency = <400000>;
70 pinctrl-names = "default", "gpio";
71 pinctrl-0 = <&pinctrl_i2c1>;
72 pinctrl-1 = <&pinctrl_i2c1_gpio>;
73 scl-gpios = <&gpio5 14 GPIO_OPEN_DRAIN>;
74 sda-gpios = <&gpio5 15 GPIO_OPEN_DRAIN>;
80 interrupt-parent = <&gpio3>;
82 pinctrl-0 = <&pinctrl_pmic>;
87 regulator-name = "VDD_SOC (BUCK1)";
88 regulator-always-on;
89 regulator-boot-on;
90 regulator-max-microvolt = <2187500>;
91 regulator-min-microvolt = <600000>;
92 regulator-ramp-delay = <3125>;
96 regulator-name = "VDD_ARM (BUCK2)";
97 regulator-always-on;
98 regulator-boot-on;
99 regulator-max-microvolt = <2187500>;
100 regulator-min-microvolt = <600000>;
101 regulator-ramp-delay = <3125>;
105 regulator-name = "VDD_3P3V (BUCK4)";
106 regulator-always-on;
107 regulator-boot-on;
108 regulator-max-microvolt = <3400000>;
109 regulator-min-microvolt = <600000>;
113 regulator-name = "VDD_1P8V (BUCK5)";
114 regulator-always-on;
115 regulator-boot-on;
116 regulator-max-microvolt = <3400000>;
117 regulator-min-microvolt = <600000>;
121 regulator-name = "NVCC_DRAM_1P1V (BUCK6)";
122 regulator-always-on;
123 regulator-boot-on;
124 regulator-max-microvolt = <3400000>;
125 regulator-min-microvolt = <600000>;
129 regulator-name = "NVCC_SNVS_1V8 (LDO1)";
130 regulator-always-on;
131 regulator-boot-on;
132 regulator-max-microvolt = <3300000>;
133 regulator-min-microvolt = <1600000>;
137 regulator-name = "VDDA_1V8 (LDO3)";
138 regulator-always-on;
139 regulator-boot-on;
140 regulator-max-microvolt = <3300000>;
141 regulator-min-microvolt = <800000>;
145 regulator-name = "NVCC_SD1 (LDO5)";
146 regulator-max-microvolt = <3300000>;
147 regulator-min-microvolt = <1800000>;
154 clock-frequency = <100000>;
155 pinctrl-names = "default", "gpio";
156 pinctrl-0 = <&pinctrl_i2c2>;
157 pinctrl-1 = <&pinctrl_i2c2_gpio>;
158 scl-gpios = <&gpio5 16 GPIO_OPEN_DRAIN>;
159 sda-gpios = <&gpio5 17 GPIO_OPEN_DRAIN>;
164 clock-frequency = <100000>;
165 pinctrl-names = "default", "gpio";
166 pinctrl-0 = <&pinctrl_i2c3>;
167 pinctrl-1 = <&pinctrl_i2c3_gpio>;
168 scl-gpios = <&gpio5 18 GPIO_OPEN_DRAIN>;
169 sda-gpios = <&gpio5 19 GPIO_OPEN_DRAIN>;
174 clock-frequency = <100000>;
175 pinctrl-names = "default", "gpio";
176 pinctrl-0 = <&pinctrl_i2c4>;
177 pinctrl-1 = <&pinctrl_i2c4_gpio>;
178 scl-gpios = <&gpio5 20 GPIO_OPEN_DRAIN>;
179 sda-gpios = <&gpio5 21 GPIO_OPEN_DRAIN>;
184 pinctrl-names = "default";
185 pinctrl-0 = <&pinctrl_uart1>;
190 bus-width = <4>;
191 keep-power-in-suspend;
192 non-removable;
193 pinctrl-names = "default", "state_100mhz", "state_200mhz";
194 pinctrl-0 = <&pinctrl_usdhc2>;
195 pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
196 pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
201 bus-width = <8>;
202 non-removable;
203 no-mmc-hs400;
204 pinctrl-names = "default", "state_100mhz", "state_200mhz";
205 pinctrl-0 = <&pinctrl_usdhc3>;
206 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
207 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
212 pinctrl-names = "default";
213 pinctrl-0 = <&pinctrl_wdog>;
214 fsl,ext-reset-output;
303 pinctrl_rfkill_bt: rfkill-btgrp {
309 pinctrl_rfkill_wlan: rfkill-wlangrp {
335 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
346 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
374 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
389 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {