Lines Matching +full:adp +full:- +full:disable
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 * Copyright 2019-2020 Variscite Ltd.
9 /dts-v1/;
11 #include <dt-bindings/usb/pd.h>
12 #include "imx8mn-var-som.dtsi"
15 model = "Variscite VAR-SOM-MX8MN Symphony evaluation board";
16 compatible = "variscite,var-som-mx8mn-symphony", "variscite,var-som-mx8mn", "fsl,imx8mn";
18 reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
19 compatible = "regulator-fixed";
20 pinctrl-names = "default";
21 pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
22 regulator-name = "VSD_3V3";
23 regulator-min-microvolt = <3300000>;
24 regulator-max-microvolt = <3300000>;
26 enable-active-high;
29 gpio-keys {
30 compatible = "gpio-keys";
32 key-back {
38 key-home {
44 key-menu {
52 compatible = "gpio-leds";
57 linux,default-trigger = "heartbeat";
62 reg_per_3v3: regulator-peripheral-3v3 {
63 compatible = "regulator-fixed";
64 regulator-name = "per_3v3";
65 regulator-min-microvolt = <3300000>;
66 regulator-max-microvolt = <3300000>;
67 regulator-always-on;
72 reset-gpios = <&pca9534 5 GPIO_ACTIVE_HIGH>;
76 clock-frequency = <400000>;
77 pinctrl-names = "default";
78 pinctrl-0 = <&pinctrl_i2c2>;
84 gpio-controller;
85 pinctrl-names = "default";
86 pinctrl-0 = <&pinctrl_pca9534>;
87 interrupt-parent = <&gpio1>;
89 #gpio-cells = <2>;
90 wakeup-source;
91 vcc-supply = <®_per_3v3>;
94 usb3-sata-sel-hog {
95 gpio-hog;
97 output-low;
98 line-name = "usb3_sata_sel";
101 som-vselect-hog {
102 gpio-hog;
104 output-low;
105 line-name = "som_vselect";
108 enet-sel-hog {
109 gpio-hog;
111 output-low;
112 line-name = "enet_sel";
125 interrupt-parent = <&gpio1>;
127 pinctrl-names = "default";
128 pinctrl-0 = <&pinctrl_ptn5150>;
132 remote-endpoint = <&usb1_drd_sw>;
141 compatible = "edt,edt-ft5406";
143 pinctrl-names = "default";
144 pinctrl-0 = <&pinctrl_captouch>;
145 interrupt-parent = <&gpio5>;
148 touchscreen-size-x = <800>;
149 touchscreen-size-y = <480>;
150 touchscreen-inverted-x;
151 touchscreen-inverted-y;
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_uart1>;
169 pinctrl-names = "default";
170 pinctrl-0 = <&pinctrl_uart3>;
176 hnp-disable;
177 srp-disable;
178 adp-disable;
179 usb-role-switch;
180 disable-over-current;
181 samsung,picophy-pre-emp-curr-control = <3>;
182 samsung,picophy-dc-vol-level-adjust = <7>;
187 remote-endpoint = <&typec1_dr_sw>;