Lines Matching +full:mac +full:- +full:divider
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
17 compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
27 stdout-path = &uart2;
35 gpio-keys {
36 compatible = "gpio-keys";
38 key-user-pb {
44 key-user-pb1x {
47 interrupt-parent = <&gsc>;
51 key-erased {
54 interrupt-parent = <&gsc>;
58 key-eeprom-wp {
61 interrupt-parent = <&gsc>;
65 switch-hold {
68 interrupt-parent = <&gsc>;
73 led-controller {
74 compatible = "gpio-leds";
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_gpio_leds>;
78 led-0 {
83 default-state = "off";
86 led-1 {
91 default-state = "off";
94 led-2 {
99 default-state = "off";
102 led-3 {
107 default-state = "off";
110 led-4 {
115 default-state = "off";
118 led-5 {
123 default-state = "off";
126 led-6 {
131 default-state = "off";
134 led-7 {
139 default-state = "off";
142 led-8 {
147 default-state = "off";
150 led-9 {
155 default-state = "off";
158 led-a {
163 default-state = "off";
166 led-b {
171 default-state = "off";
175 pcie0_refclk: pcie0-refclk {
176 compatible = "fixed-clock";
177 #clock-cells = <0>;
178 clock-frequency = <100000000>;
181 reg_3p3v: regulator-3p3v {
182 compatible = "regulator-fixed";
183 regulator-name = "3P3V";
184 regulator-min-microvolt = <3300000>;
185 regulator-max-microvolt = <3300000>;
186 regulator-always-on;
191 cpu-supply = <&buck2>;
195 cpu-supply = <&buck2>;
199 cpu-supply = <&buck2>;
203 cpu-supply = <&buck2>;
207 operating-points-v2 = <&ddrc_opp_table>;
209 ddrc_opp_table: opp-table {
210 compatible = "operating-points-v2";
212 opp-25000000 {
213 opp-hz = /bits/ 64 <25000000>;
216 opp-100000000 {
217 opp-hz = /bits/ 64 <100000000>;
220 opp-750000000 {
221 opp-hz = /bits/ 64 <750000000>;
227 pinctrl-names = "default";
228 pinctrl-0 = <&pinctrl_fec1>;
229 phy-mode = "rgmii-id";
230 phy-handle = <ðphy0>;
231 local-mac-address = [00 00 00 00 00 00];
235 #address-cells = <1>;
236 #size-cells = <0>;
238 ethphy0: ethernet-phy@0 {
239 compatible = "ethernet-phy-ieee802.3-c22";
241 rx-internal-delay-ps = <2000>;
242 tx-internal-delay-ps = <2500>;
248 gpio-line-names = "", "", "", "", "", "", "", "",
255 gpio-line-names = "dig2_in", "dig2_out#", "dig2_ctl", "", "", "", "dig1_ctl", "",
262 gpio-line-names = "", "", "", "", "", "", "", "sim1_det#",
269 clock-frequency = <100000>;
270 pinctrl-names = "default", "gpio";
271 pinctrl-0 = <&pinctrl_i2c1>;
272 pinctrl-1 = <&pinctrl_i2c1_gpio>;
273 scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
274 sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
280 pinctrl-0 = <&pinctrl_gsc>;
281 interrupt-parent = <&gpio4>;
283 interrupt-controller;
284 #interrupt-cells = <1>;
285 #address-cells = <1>;
286 #size-cells = <0>;
289 compatible = "gw,gsc-adc";
290 #address-cells = <1>;
291 #size-cells = <0>;
309 gw,voltage-divider-ohms = <22100 1000>;
310 gw,voltage-offset-microvolt = <700000>;
317 gw,voltage-divider-ohms = <10000 10000>;
324 gw,voltage-divider-ohms = <10000 10000>;
361 gw,voltage-divider-ohms = <10000 10000>;
369 gpio-controller;
370 #gpio-cells = <2>;
371 interrupt-parent = <&gsc>;
406 clock-frequency = <400000>;
407 pinctrl-names = "default", "gpio";
408 pinctrl-0 = <&pinctrl_i2c2>;
409 pinctrl-1 = <&pinctrl_i2c2_gpio>;
410 scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
411 sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
417 pinctrl-names = "default";
418 pinctrl-0 = <&pinctrl_pmic>;
419 interrupt-parent = <&gpio3>;
421 rohm,reset-snvs-powered;
422 #clock-cells = <0>;
424 clock-output-names = "clk-32k-out";
427 /* vdd_soc: 0.805-0.900V (typ=0.8V) */
429 regulator-name = "buck1";
430 regulator-min-microvolt = <700000>;
431 regulator-max-microvolt = <1300000>;
432 regulator-boot-on;
433 regulator-always-on;
434 regulator-ramp-delay = <1250>;
437 /* vdd_arm: 0.805-1.0V (typ=0.9V) */
439 regulator-name = "buck2";
440 regulator-min-microvolt = <700000>;
441 regulator-max-microvolt = <1300000>;
442 regulator-boot-on;
443 regulator-always-on;
444 regulator-ramp-delay = <1250>;
445 rohm,dvs-run-voltage = <1000000>;
446 rohm,dvs-idle-voltage = <900000>;
449 /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
451 regulator-name = "buck3";
452 regulator-min-microvolt = <700000>;
453 regulator-max-microvolt = <1350000>;
454 regulator-boot-on;
455 regulator-always-on;
460 regulator-name = "buck4";
461 regulator-min-microvolt = <3000000>;
462 regulator-max-microvolt = <3300000>;
463 regulator-boot-on;
464 regulator-always-on;
469 regulator-name = "buck5";
470 regulator-min-microvolt = <1605000>;
471 regulator-max-microvolt = <1995000>;
472 regulator-boot-on;
473 regulator-always-on;
478 regulator-name = "buck6";
479 regulator-min-microvolt = <800000>;
480 regulator-max-microvolt = <1400000>;
481 regulator-boot-on;
482 regulator-always-on;
487 regulator-name = "ldo1";
488 regulator-min-microvolt = <1600000>;
489 regulator-max-microvolt = <1900000>;
490 regulator-boot-on;
491 regulator-always-on;
496 regulator-name = "ldo2";
497 regulator-min-microvolt = <800000>;
498 regulator-max-microvolt = <900000>;
499 regulator-boot-on;
500 regulator-always-on;
505 regulator-name = "ldo3";
506 regulator-min-microvolt = <1800000>;
507 regulator-max-microvolt = <3300000>;
508 regulator-boot-on;
509 regulator-always-on;
513 regulator-name = "ldo4";
514 regulator-min-microvolt = <900000>;
515 regulator-max-microvolt = <1800000>;
516 regulator-boot-on;
517 regulator-always-on;
521 regulator-name = "ldo6";
522 regulator-min-microvolt = <900000>;
523 regulator-max-microvolt = <1800000>;
524 regulator-boot-on;
525 regulator-always-on;
532 clock-frequency = <400000>;
533 pinctrl-names = "default", "gpio";
534 pinctrl-0 = <&pinctrl_i2c3>;
535 pinctrl-1 = <&pinctrl_i2c3_gpio>;
536 scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
537 sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
541 pinctrl-names = "default";
542 pinctrl-0 = <&pinctrl_accel>;
545 st,drdy-int-pin = <1>;
546 interrupt-parent = <&gpio1>;
552 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
553 fsl,clkreq-unsupported;
555 clock-names = "ref";
560 pinctrl-names = "default";
561 pinctrl-0 = <&pinctrl_pcie0>;
562 reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
565 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
567 assigned-clock-rates = <10000000>, <250000000>;
568 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
581 /* off-board RS232/RS485/RS422 */
583 pinctrl-names = "default";
584 pinctrl-0 = <&pinctrl_uart1>;
585 cts-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
586 rts-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
587 dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
588 dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
589 dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
595 pinctrl-names = "default";
596 pinctrl-0 = <&pinctrl_uart2>;
602 disable-over-current;
608 pinctrl-names = "default", "state_100mhz", "state_200mhz";
609 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
610 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
611 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
612 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
613 bus-width = <4>;
614 vmmc-supply = <®_3p3v>;
620 pinctrl-names = "default", "state_100mhz", "state_200mhz";
621 pinctrl-0 = <&pinctrl_usdhc3>;
622 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
623 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
624 bus-width = <8>;
625 non-removable;
630 pinctrl-names = "default";
631 pinctrl-0 = <&pinctrl_wdog>;
632 fsl,ext-reset-output;
637 pinctrl-names = "default";
638 pinctrl-0 = <&pinctrl_hog>;
792 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
803 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
814 pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
837 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
853 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {