Lines Matching +full:ldo6 +full:- +full:8
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5 /dts-v1/;
8 #include <dt-bindings/leds/common.h>
18 stdout-path = &uart3;
22 compatible = "pwm-backlight";
24 brightness-levels = <0 255>;
25 num-interpolated-steps = <255>;
26 default-brightness-level = <222>;
31 compatible = "gpio-leds";
32 pinctrl-names = "default";
33 pinctrl-0 = <&pinctrl_gpio_led>;
35 heartbeat-led {
38 linux,default-trigger = "heartbeat";
42 pmic_osc: clock-pmic {
43 compatible = "fixed-clock";
44 #clock-cells = <0>;
45 clock-frequency = <32768>;
46 clock-output-names = "pmic_osc";
49 wlreg_on: regulator-wlreg-on {
50 compatible = "regulator-fixed";
51 regulator-min-microvolt = <3300000>;
52 regulator-max-microvolt = <3300000>;
53 regulator-name = "wlreg_on";
55 startup-delay-us = <100>;
56 enable-active-high;
57 regulator-always-on;
61 reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
62 compatible = "regulator-fixed";
63 regulator-name = "VSD_3V3";
64 regulator-min-microvolt = <3300000>;
65 regulator-max-microvolt = <3300000>;
67 enable-active-high;
68 startup-delay-us = <100>;
69 off-on-delay-us = <12000>;
72 regulator-usdhc3rst {
73 compatible = "regulator-fixed";
74 regulator-name = "usdhc3_rst";
75 regulator-min-microvolt = <3300000>;
76 regulator-max-microvolt = <3300000>;
78 regulator-always-on;
79 enable-active-high;
82 regulator-fec1rst {
83 compatible = "regulator-fixed";
84 regulator-name = "fec1_rst";
85 regulator-min-microvolt = <3300000>;
86 regulator-max-microvolt = <3300000>;
88 regulator-always-on;
89 enable-active-high;
90 startup-delay-us = <500>;
91 regulator-boot-on;
96 arm-supply = <&buck2>;
108 pinctrl-names = "default";
109 pinctrl-0 = <&pinctrl_fec1>;
110 phy-mode = "rgmii-id";
111 phy-handle = <ðphy0>;
112 fsl,magic-packet;
116 #address-cells = <1>;
117 #size-cells = <0>;
119 ethphy0: ethernet-phy@0 {
120 compatible = "ethernet-phy-ieee802.3-c22";
127 clock-frequency = <400000>;
128 pinctrl-names = "default";
129 pinctrl-0 = <&pinctrl_i2c2>;
135 pinctrl-names = "default";
136 pinctrl-0 = <&pinctrl_pmic>;
137 #clock-cells = <0>;
139 clock-names = "osc";
140 clock-output-names = "pmic_clk";
141 interrupt-parent = <&gpio1>;
143 rohm,reset-snvs-powered;
147 regulator-name = "buck1";
148 regulator-min-microvolt = <700000>;
149 regulator-max-microvolt = <1300000>;
150 regulator-boot-on;
151 regulator-always-on;
152 regulator-ramp-delay = <1250>;
156 regulator-name = "buck2";
157 regulator-min-microvolt = <700000>;
158 regulator-max-microvolt = <1300000>;
159 regulator-boot-on;
160 regulator-always-on;
161 regulator-ramp-delay = <1250>;
162 rohm,dvs-run-voltage = <1000000>;
163 rohm,dvs-idle-voltage = <900000>;
167 regulator-name = "buck3";
168 regulator-min-microvolt = <700000>;
169 regulator-max-microvolt = <1300000>;
170 regulator-boot-on;
171 regulator-always-on;
175 regulator-name = "buck4";
176 regulator-min-microvolt = <700000>;
177 regulator-max-microvolt = <1300000>;
178 regulator-boot-on;
179 regulator-always-on;
183 regulator-name = "buck5";
184 regulator-min-microvolt = <700000>;
185 regulator-max-microvolt = <1350000>;
186 regulator-boot-on;
187 regulator-always-on;
191 regulator-name = "buck6";
192 regulator-min-microvolt = <3000000>;
193 regulator-max-microvolt = <3300000>;
194 regulator-boot-on;
195 regulator-always-on;
199 regulator-name = "buck7";
200 regulator-min-microvolt = <1605000>;
201 regulator-max-microvolt = <1995000>;
202 regulator-boot-on;
203 regulator-always-on;
207 regulator-name = "buck8";
208 regulator-min-microvolt = <800000>;
209 regulator-max-microvolt = <1400000>;
210 regulator-boot-on;
211 regulator-always-on;
215 regulator-name = "ldo1";
216 regulator-min-microvolt = <1600000>;
217 regulator-max-microvolt = <1900000>;
218 regulator-boot-on;
219 regulator-always-on;
223 regulator-name = "ldo2";
224 regulator-min-microvolt = <800000>;
225 regulator-max-microvolt = <900000>;
226 regulator-boot-on;
227 regulator-always-on;
231 regulator-name = "ldo3";
232 regulator-min-microvolt = <1800000>;
233 regulator-max-microvolt = <3300000>;
234 regulator-boot-on;
235 regulator-always-on;
239 regulator-name = "ldo4";
240 regulator-min-microvolt = <900000>;
241 regulator-max-microvolt = <1800000>;
242 regulator-boot-on;
243 regulator-always-on;
247 regulator-name = "ldo5";
248 regulator-min-microvolt = <1800000>;
249 regulator-max-microvolt = <3300000>;
252 ldo6: LDO6 { label
253 regulator-name = "ldo6";
254 regulator-min-microvolt = <900000>;
255 regulator-max-microvolt = <1800000>;
256 regulator-boot-on;
257 regulator-always-on;
261 regulator-name = "ldo7";
262 regulator-min-microvolt = <1800000>;
263 regulator-max-microvolt = <3300000>;
281 clock-frequency = <100000>;
282 pinctrl-names = "default";
283 pinctrl-0 = <&pinctrl_i2c3>;
288 pinctrl-names = "default";
289 pinctrl-0 = <&pinctrl_pwm_backlight>;
294 #sound-dai-cells = <0>;
295 pinctrl-names = "default";
296 pinctrl-0 = <&pinctrl_sai2>;
297 assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
298 assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
299 assigned-clock-rates = <49152000>;
304 clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
305 fsl,sai-asynchronous;
318 pinctrl-names = "default";
319 pinctrl-0 = <&pinctrl_uart1>;
320 assigned-clocks = <&clk IMX8MM_CLK_UART1>;
321 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
326 pinctrl-names = "default";
327 pinctrl-0 = <&pinctrl_uart2>;
328 assigned-clocks = <&clk IMX8MM_CLK_UART2>;
329 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
334 pinctrl-names = "default";
335 pinctrl-0 = <&pinctrl_uart3>;
340 pinctrl-names = "default";
341 pinctrl-0 = <&pinctrl_uart4>;
342 assigned-clocks = <&clk IMX8MM_CLK_UART4>;
343 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
344 uart-has-rtscts;
348 compatible = "brcm,bcm4330-bt";
349 pinctrl-names = "default";
350 pinctrl-0 = <&pinctrl_bt>;
351 max-speed = <3000000>;
352 device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
353 host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
354 shutdown-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
360 hnp-disable;
361 srp-disable;
362 disable-over-current;
368 hnp-disable;
369 srp-disable;
370 disable-over-current;
375 pinctrl-names = "default", "state_100mhz", "state_200mhz";
376 pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
377 pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
378 pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
379 bus-width = <4>;
380 non-removable;
384 pinctrl-names = "default", "state_100mhz", "state_200mhz";
385 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
386 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
387 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
388 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
389 wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
390 no-1-8-v;
391 bus-width = <4>;
392 vmmc-supply = <®_usdhc2_vmmc>;
397 pinctrl-names = "default", "state_100mhz", "state_200mhz";
398 pinctrl-0 = <&pinctrl_usdhc3>;
399 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
400 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
401 bus-width = <8>;
402 non-removable;
403 no-1-8-v;
408 pinctrl-names = "default";
409 pinctrl-0 = <&pinctrl_wdog>;
410 fsl,ext-reset-output;
415 pinctrl-names = "default";
416 pinctrl-0 = <&pinctrl_hog_1>;