Lines Matching +full:imx8mm +full:- +full:evk

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "imx8mm-innocomm-wb15.dtsi"
12 	model = "InnoComm WB15-EVK";
13 	compatible = "innocomm,wb15-evk", "fsl,imx8mm";
16 		stdout-path = &uart2;
20 		compatible = "gpio-leds";
21 		pinctrl-names = "default";
22 		pinctrl-0 = <&pinctrl_gpio_leds>;
24 		led-0 {
27 			default-state = "off";
31 	reg_vsd_3v3: regulator-vsd-3v3 {
32 		compatible = "regulator-fixed";
33 		pinctrl-names = "default";
34 		pinctrl-0 = <&pinctrl_reg_vsd_3v3>;
35 		regulator-name = "VSD_3V3";
36 		regulator-min-microvolt = <3300000>;
37 		regulator-max-microvolt = <3300000>;
39 		enable-active-high;
42 	reg_ethphy: regulator-eth-phy {
43 		compatible = "regulator-fixed";
44 		pinctrl-names = "default";
45 		pinctrl-0 = <&pinctrl_fec_phy_reg>;
46 		regulator-name = "PHY_3V3";
47 		regulator-min-microvolt = <3300000>;
48 		regulator-max-microvolt = <3300000>;
50 		enable-active-high;
55 	pinctrl-names = "default";
56 	pinctrl-0 = <&pinctrl_fec>;
57 	phy-mode = "rgmii-id";
58 	phy-handle = <&ethphy0>;
59 	fsl,magic-packet;
63 		#address-cells = <1>;
64 		#size-cells = <0>;
66 		ethphy0: ethernet-phy@1 {
67 			compatible = "ethernet-phy-ieee802.3-c22";
69 			pinctrl-names = "default";
70 			pinctrl-0 = <&pinctrl_fec_phy>;
71 			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
72 			phy-supply = <&reg_ethphy>;
83 	samsung,picophy-pre-emp-curr-control = <3>;
84 	samsung,picophy-dc-vol-level-adjust = <7>;
85 	disable-over-current;
91 	samsung,picophy-pre-emp-curr-control = <3>;
92 	samsung,picophy-dc-vol-level-adjust = <7>;
93 	disable-over-current;
98 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
99 	vmmc-supply = <&reg_vsd_3v3>;
104 	pinctrl_fec: fec-grp {
123 	pinctrl_fec_phy: fec-phy-grp {
129 	pinctrl_fec_phy_reg: fec-phy-reg-grp {
135 	pinctrl_gpio_leds: led-grp {
141 	pinctrl_reg_vsd_3v3: reg-vsd-3v3-grp {