Lines Matching +full:gpio +full:- +full:width

1 // SPDX-License-Identifier: GPL-2.0+
3  * Device Tree file for the Kontron SMARC-sAL28 board.
9 /dts-v1/;
10 #include "fsl-ls1028a.dtsi"
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/input/input.h>
16 	model = "Kontron SMARC-sAL28";
33 		compatible = "gpio-keys";
35 		power-button {
36 			interrupts-extended = <&sl28cpld_intc
42 		sleep-button {
43 			interrupts-extended = <&sl28cpld_intc
51 		compatible = "gpio-keys-polled";
52 		poll-interval = <200>;
54 		lid-switch {
55 			linux,input-type = <EV_SW>;
63 		stdout-path = "serial0:115200n8";
84 	phy0: ethernet-phy@5 {
86 		eee-broken-1000t;
87 		eee-broken-100tx;
92 	phy-handle = <&phy0>;
93 	phy-mode = "sgmii";
94 	managed = "in-band-status";
95 	nvmem-cells = <&base_mac_address 0>;
96 	nvmem-cell-names = "mac-address";
101 	sd-uhs-sdr104;
102 	sd-uhs-sdr50;
103 	sd-uhs-sdr25;
104 	sd-uhs-sdr12;
109 	mmc-hs200-1_8v;
110 	mmc-hs400-1_8v;
111 	bus-width = <8>;
119 		compatible = "jedec,spi-nor";
120 		m25p,fast-read;
121 		spi-max-frequency = <133000000>;
123 		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
124 		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
125 		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
128 			compatible = "fixed-partitions";
129 			#address-cells = <1>;
130 			#size-cells = <1>;
135 				read-only;
141 				read-only;
160 		otp-1 {
161 			compatible = "user-otp";
163 			nvmem-layout {
164 				compatible = "kontron,sl28-vpd";
166 				serial_number: serial-number {
169 				base_mac_address: base-mac-address {
170 					#nvmem-cell-cells = <1>;
182 	gpio-line-names =
190 	gpio-line-names =
208 		#address-cells = <1>;
209 		#size-cells = <0>;
212 			compatible = "kontron,sl28cpld-wdt";
214 			kontron,assert-wdt-timeout-pin;
218 			compatible = "kontron,sl28cpld-fan";
223 			compatible = "kontron,sl28cpld-pwm";
225 			#pwm-cells = <2>;
229 			compatible = "kontron,sl28cpld-pwm";
231 			#pwm-cells = <2>;
234 		sl28cpld_gpio0: gpio@10 {
235 			compatible = "kontron,sl28cpld-gpio";
237 			interrupts-extended = <&gpio2 6
240 			gpio-controller;
241 			#gpio-cells = <2>;
242 			gpio-line-names =
248 			interrupt-controller;
249 			#interrupt-cells = <2>;
252 		sl28cpld_gpio1: gpio@15 {
253 			compatible = "kontron,sl28cpld-gpio";
255 			interrupts-extended = <&gpio2 6
258 			gpio-controller;
259 			#gpio-cells = <2>;
260 			gpio-line-names =
264 			interrupt-controller;
265 			#interrupt-cells = <2>;
268 		sl28cpld_gpio2: gpio@1a {
269 			compatible = "kontron,sl28cpld-gpo";
272 			gpio-controller;
273 			#gpio-cells = <2>;
274 			gpio-line-names =
278 				"LVDS bridge power-down",
283 		sl28cpld_gpio3: gpio@1b {
284 			compatible = "kontron,sl28cpld-gpi";
287 			gpio-controller;
288 			#gpio-cells = <2>;
289 			gpio-line-names =
295 		sl28cpld_intc: interrupt-controller@1c {
296 			compatible = "kontron,sl28cpld-intc";
298 			interrupts-extended = <&gpio2 6
301 			interrupt-controller;
302 			#interrupt-cells = <2>;
332 	dsa-tag-protocol = "ocelot-8021q";
336 	dsa-tag-protocol = "ocelot-8021q";