Lines Matching +full:gpa0 +full:- +full:1 +full:- +full:pin
1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/clock/samsung,s2mps11.h>
13 #include <dt-bindings/gpio/gpio.h>
17 compatible = "samsung,exynos7-espresso", "samsung,exynos7";
26 stdout-path = &serial_2;
34 usb30_vbus_reg: regulator-usb30 {
35 compatible = "regulator-fixed";
36 regulator-name = "VBUS_5V";
37 regulator-min-microvolt = <5000000>;
38 regulator-max-microvolt = <5000000>;
39 gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
40 pinctrl-names = "default";
41 pinctrl-0 = <&usb30_vbus_en>;
42 enable-active-high;
45 usb3drd_boost_5v: regulator-usb3drd-boost {
46 compatible = "regulator-fixed";
47 regulator-name = "VUSB_VBUS_5V";
48 regulator-min-microvolt = <5000000>;
49 regulator-max-microvolt = <5000000>;
50 gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
51 pinctrl-names = "default";
52 pinctrl-0 = <&usb3drd_boost_en>;
53 enable-active-high;
59 clock-frequency = <24000000>;
63 mali-supply = <&buck6_reg>;
73 clock-names = "rtc", "rtc_src";
81 vdd-supply = <&ldo3_reg>;
89 compatible = "samsung,s2mps15-pmic";
92 interrupt-parent = <&gpa0>;
93 pinctrl-names = "default";
94 pinctrl-0 = <&pmic_irq>;
95 wakeup-source;
98 compatible = "samsung,s2mps13-clk";
99 #clock-cells = <1>;
100 clock-output-names = "s2mps13_ap", "s2mps13_cp",
106 regulator-name = "vdd_ldo1";
107 regulator-min-microvolt = <500000>;
108 regulator-max-microvolt = <900000>;
109 regulator-always-on;
110 regulator-enable-ramp-delay = <125>;
114 regulator-name = "vqmmc-sdcard";
115 regulator-min-microvolt = <1620000>;
116 regulator-max-microvolt = <3300000>;
117 regulator-always-on;
118 regulator-enable-ramp-delay = <125>;
122 regulator-name = "vdd_ldo3";
123 regulator-min-microvolt = <1620000>;
124 regulator-max-microvolt = <1980000>;
125 regulator-always-on;
126 regulator-boot-on;
127 regulator-enable-ramp-delay = <125>;
131 regulator-name = "vdd_ldo4";
132 regulator-min-microvolt = <800000>;
133 regulator-max-microvolt = <1110000>;
134 regulator-always-on;
135 regulator-enable-ramp-delay = <125>;
139 regulator-name = "vdd_ldo5";
140 regulator-min-microvolt = <1620000>;
141 regulator-max-microvolt = <1980000>;
142 regulator-always-on;
143 regulator-enable-ramp-delay = <125>;
147 regulator-name = "vdd_ldo6";
148 regulator-min-microvolt = <2250000>;
149 regulator-max-microvolt = <3300000>;
150 regulator-enable-ramp-delay = <125>;
154 regulator-name = "vdd_ldo7";
155 regulator-min-microvolt = <700000>;
156 regulator-max-microvolt = <1150000>;
157 regulator-enable-ramp-delay = <125>;
158 regulator-always-on;
162 regulator-name = "vdd_ldo8";
163 regulator-min-microvolt = <700000>;
164 regulator-max-microvolt = <1000000>;
165 regulator-enable-ramp-delay = <125>;
169 regulator-name = "vdd_ldo9";
170 regulator-min-microvolt = <700000>;
171 regulator-max-microvolt = <1000000>;
172 regulator-enable-ramp-delay = <125>;
176 regulator-name = "vdd_ldo10";
177 regulator-min-microvolt = <700000>;
178 regulator-max-microvolt = <1000000>;
179 regulator-enable-ramp-delay = <125>;
183 regulator-name = "vdd_ldo11";
184 regulator-min-microvolt = <1000000>;
185 regulator-max-microvolt = <1300000>;
186 regulator-always-on;
187 regulator-enable-ramp-delay = <125>;
191 regulator-name = "vdd_ldo12";
192 regulator-min-microvolt = <1000000>;
193 regulator-max-microvolt = <1300000>;
194 regulator-enable-ramp-delay = <125>;
195 regulator-always-on;
199 regulator-name = "vdd_ldo13";
200 regulator-min-microvolt = <1000000>;
201 regulator-max-microvolt = <1300000>;
202 regulator-always-on;
203 regulator-enable-ramp-delay = <125>;
207 regulator-name = "vdd_ldo14";
208 regulator-min-microvolt = <1800000>;
209 regulator-max-microvolt = <3375000>;
210 regulator-enable-ramp-delay = <125>;
214 regulator-name = "vmmc-sdcard";
215 regulator-min-microvolt = <1800000>;
216 regulator-max-microvolt = <3375000>;
217 regulator-enable-ramp-delay = <125>;
221 regulator-name = "vdd_ldo18";
222 regulator-min-microvolt = <1500000>;
223 regulator-max-microvolt = <2275000>;
224 regulator-enable-ramp-delay = <125>;
228 regulator-name = "vdd_ldo19";
229 regulator-min-microvolt = <1800000>;
230 regulator-max-microvolt = <3375000>;
231 regulator-enable-ramp-delay = <125>;
235 regulator-name = "vdd_ldo21";
236 regulator-min-microvolt = <1800000>;
237 regulator-max-microvolt = <3375000>;
238 regulator-enable-ramp-delay = <125>;
242 regulator-name = "vdd_ldo23";
243 regulator-min-microvolt = <1500000>;
244 regulator-max-microvolt = <2275000>;
245 regulator-enable-ramp-delay = <125>;
249 regulator-name = "vdd_ldo25";
250 regulator-min-microvolt = <1800000>;
251 regulator-max-microvolt = <3375000>;
252 regulator-enable-ramp-delay = <125>;
256 regulator-name = "vdd_ldo26";
257 regulator-min-microvolt = <700000>;
258 regulator-max-microvolt = <1470000>;
259 regulator-enable-ramp-delay = <125>;
263 regulator-name = "vdd_ldo27";
264 regulator-min-microvolt = <1500000>;
265 regulator-max-microvolt = <2275000>;
266 regulator-enable-ramp-delay = <125>;
270 regulator-name = "vdd_mif";
271 regulator-min-microvolt = <500000>;
272 regulator-max-microvolt = <1200000>;
273 regulator-always-on;
274 regulator-boot-on;
275 regulator-ramp-delay = <25000>;
276 regulator-enable-ramp-delay = <250>;
280 regulator-name = "vdd_atlas";
281 regulator-min-microvolt = <500000>;
282 regulator-max-microvolt = <1200000>;
283 regulator-always-on;
284 regulator-boot-on;
285 regulator-ramp-delay = <12500>;
286 regulator-enable-ramp-delay = <250>;
290 regulator-name = "vdd_int";
291 regulator-min-microvolt = <500000>;
292 regulator-max-microvolt = <1200000>;
293 regulator-always-on;
294 regulator-boot-on;
295 regulator-ramp-delay = <12500>;
296 regulator-enable-ramp-delay = <250>;
300 regulator-name = "vdd_buck5";
301 regulator-min-microvolt = <500000>;
302 regulator-max-microvolt = <1300000>;
303 regulator-ramp-delay = <25000>;
304 regulator-enable-ramp-delay = <250>;
308 regulator-name = "vdd_g3d";
309 regulator-min-microvolt = <500000>;
310 regulator-max-microvolt = <1400000>;
311 regulator-ramp-delay = <12500>;
312 regulator-enable-ramp-delay = <250>;
316 regulator-name = "vdd_buck7";
317 regulator-min-microvolt = <1000000>;
318 regulator-max-microvolt = <1500000>;
319 regulator-always-on;
320 regulator-ramp-delay = <25000>;
321 regulator-enable-ramp-delay = <250>;
325 regulator-name = "vdd_buck8";
326 regulator-min-microvolt = <1000000>;
327 regulator-max-microvolt = <1500000>;
328 regulator-always-on;
329 regulator-ramp-delay = <25000>;
330 regulator-enable-ramp-delay = <250>;
334 regulator-name = "vdd_buck9";
335 regulator-min-microvolt = <1800000>;
336 regulator-max-microvolt = <2100000>;
337 regulator-always-on;
338 regulator-ramp-delay = <25000>;
339 regulator-enable-ramp-delay = <250>;
343 regulator-name = "vdd_buck10";
344 regulator-min-microvolt = <1000000>;
345 regulator-max-microvolt = <3000000>;
346 regulator-always-on;
347 regulator-ramp-delay = <25000>;
348 regulator-enable-ramp-delay = <250>;
355 pmic_irq: pmic-irq-pins {
356 samsung,pins = "gpa0-2";
357 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
358 samsung,pin-drv = <EXYNOS7_PIN_DRV_LV4>;
364 cap-mmc-highspeed;
365 mmc-ddr-1_8v;
366 mmc-hs200-1_8v;
367 non-removable;
368 card-detect-delay = <200>;
369 clock-frequency = <800000000>;
370 samsung,dw-mshc-ciu-div = <3>;
371 samsung,dw-mshc-sdr-timing = <0 4>;
372 samsung,dw-mshc-ddr-timing = <0 2>;
373 pinctrl-names = "default";
374 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>;
375 bus-width = <8>;
380 cap-sd-highspeed;
381 card-detect-delay = <200>;
382 clock-frequency = <400000000>;
383 samsung,dw-mshc-ciu-div = <3>;
384 samsung,dw-mshc-sdr-timing = <2 3>;
385 samsung,dw-mshc-ddr-timing = <1 2>;
386 pinctrl-names = "default";
387 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
388 bus-width = <4>;
389 vmmc-supply = <&ldo17_reg>;
390 vqmmc-supply = <&ldo2_reg>;
391 disable-wp;
395 usb30_vbus_en: usb30-vbus-en-pins {
396 samsung,pins = "gph1-1";
397 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
398 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
399 samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
402 usb3drd_boost_en: usb3drd-boost-en-pins {
403 samsung,pins = "gpf4-1";
404 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
405 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
406 samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
415 vdd10-supply = <&ldo4_reg>;
416 vdd33-supply = <&ldo6_reg>;
420 vbus-supply = <&usb30_vbus_reg>;
421 vbus-boost-supply = <&usb3drd_boost_5v>;