Lines Matching +full:g12a +full:- +full:mdio +full:- +full:mux
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 #include "meson-gx.dtsi"
8 #include <dt-bindings/clock/gxbb-clkc.h>
9 #include <dt-bindings/clock/gxbb-aoclkc.h>
10 #include <dt-bindings/gpio/meson-gxl-gpio.h>
11 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
14 compatible = "amlogic,meson-gxl";
18 compatible = "amlogic,meson-gxl-usb-ctrl";
21 #address-cells = <2>;
22 #size-cells = <2>;
26 clock-names = "usb_ctrl", "ddr";
32 phy-names = "usb2-phy0", "usb2-phy1";
35 compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
39 clock-names = "otg";
42 g-rx-fifo-size = <192>;
43 g-np-tx-fifo-size = <128>;
44 g-tx-fifo-size = <128 128 16 16 16>;
52 maximum-speed = "high-speed";
57 acodec: audio-controller@c8832000 {
60 #sound-dai-cells = <0>;
61 sound-name-prefix = "ACODEC";
63 clock-names = "pclk";
69 compatible = "amlogic,gxl-crypto";
74 clock-names = "blkmv";
81 compatible = "amlogic,aiu-gxl", "amlogic,aiu";
91 clock-names = "pclk",
105 compatible = "amlogic,meson-gxl-usb2-phy";
106 #phy-cells = <0>;
109 clock-names = "phy";
111 reset-names = "phy";
116 compatible = "amlogic,meson-gxl-usb2-phy";
117 #phy-cells = <0>;
120 clock-names = "phy";
122 reset-names = "phy";
136 clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
138 mdio0: mdio {
139 #address-cells = <1>;
140 #size-cells = <0>;
141 compatible = "snps,dwmac-mdio";
147 compatible = "amlogic,meson-gxl-aobus-pinctrl";
148 #address-cells = <2>;
149 #size-cells = <2>;
156 reg-names = "mux", "pull", "gpio";
157 gpio-controller;
158 #gpio-cells = <2>;
159 gpio-ranges = <&pinctrl_aobus 0 0 14>;
163 mux {
166 bias-disable;
171 mux {
175 bias-disable;
180 mux {
183 bias-disable;
188 mux {
191 bias-disable;
196 mux {
200 bias-disable;
205 mux {
208 bias-disable;
213 mux {
217 bias-disable;
222 mux {
225 bias-disable;
230 mux {
233 bias-disable;
238 mux {
241 bias-disable;
246 mux {
249 bias-disable;
254 mux {
257 bias-disable;
262 mux {
265 bias-disable;
270 mux {
273 bias-disable;
278 mux {
281 bias-disable;
286 mux {
289 bias-disable;
294 mux {
297 bias-disable;
305 clock-names = "core";
309 compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc";
311 clock-names = "xtal", "mpeg-clk";
315 compatible = "amlogic,meson-gxl-gpio-intc",
316 "amlogic,meson-gpio-intc";
321 compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
325 reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
329 clock-names = "isfr", "iahb", "venci";
330 power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
332 assigned-clocks = <&clkc CLKID_HDMI_SEL>,
334 assigned-clock-parents = <&xtal>, <0>;
335 assigned-clock-rates = <0>, <24000000>;
339 clkc: clock-controller {
340 compatible = "amlogic,gxl-clkc";
341 #clock-cells = <1>;
343 clock-names = "xtal";
349 clock-names = "core";
370 compatible = "amlogic,meson-gxl-periphs-pinctrl";
371 #address-cells = <2>;
372 #size-cells = <2>;
380 reg-names = "mux", "pull", "pull-enable", "gpio";
381 gpio-controller;
382 #gpio-cells = <2>;
383 gpio-ranges = <&pinctrl_periphs 0 0 100>;
387 mux-0 {
391 bias-pull-up;
394 mux-1 {
397 bias-disable;
401 emmc_ds_pins: emmc-ds {
402 mux {
405 bias-pull-down;
410 mux {
413 bias-pull-down;
418 mux {
424 bias-disable;
428 spi_pins: spi-pins {
429 mux {
434 bias-disable;
438 spi_idle_high_pins: spi-idle-high-pins {
439 mux {
441 bias-pull-up;
445 spi_idle_low_pins: spi-idle-low-pins {
446 mux {
448 bias-pull-down;
452 spi_ss0_pins: spi-ss0 {
453 mux {
456 bias-disable;
461 mux-0 {
468 bias-pull-up;
471 mux-1 {
474 bias-disable;
479 mux {
482 bias-pull-down;
487 mux-0 {
494 bias-pull-up;
497 mux-1 {
500 bias-disable;
505 mux {
508 bias-pull-down;
513 mux {
516 bias-disable;
521 mux {
525 bias-disable;
530 mux {
534 bias-disable;
539 mux {
543 bias-disable;
548 mux {
552 bias-disable;
557 mux {
561 bias-disable;
566 mux {
570 bias-disable;
575 mux {
579 bias-disable;
584 mux {
588 bias-disable;
593 mux {
597 bias-disable;
602 mux {
606 bias-disable;
611 mux {
627 bias-disable;
632 mux {
635 bias-disable;
640 mux {
647 mux {
650 bias-disable;
655 mux {
658 bias-disable;
663 mux {
666 bias-disable;
671 mux {
674 bias-disable;
679 mux {
682 bias-disable;
687 mux {
690 bias-disable;
695 mux {
698 bias-disable;
703 mux {
706 bias-disable;
711 mux {
714 bias-disable;
719 mux {
722 bias-disable;
727 mux {
730 bias-disable;
735 mux {
738 bias-disable;
743 mux {
746 bias-disable;
750 mux {
753 bias-disable;
758 mux {
761 bias-disable;
766 mux {
769 bias-disable;
774 mux {
777 bias-disable;
782 eth_phy_mux: mdio@558 {
784 compatible = "amlogic,gxl-mdio-mux";
785 #address-cells = <1>;
786 #size-cells = <0>;
788 clock-names = "ref";
789 mdio-parent-bus = <&mdio0>;
791 external_mdio: mdio@0 {
793 #address-cells = <1>;
794 #size-cells = <0>;
797 internal_mdio: mdio@1 {
799 #address-cells = <1>;
800 #size-cells = <0>;
802 internal_phy: ethernet-phy@8 {
803 compatible = "ethernet-phy-id0181.4400";
806 max-speed = <100>;
825 reset-names = "viu", "venc", "vcbus", "bt656",
830 clock-names = "vpu", "vapb";
834 * free mux to safely change frequency while running.
835 * Same for VAPB but with a final gate after the glitch free mux.
837 assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
839 <&clkc CLKID_VPU>, /* Glitch free mux */
842 <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
843 assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
849 assigned-clock-rates = <0>, /* Do Nothing */
858 compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
863 clock-names = "clkin", "core", "adc_clk", "adc_sel";
870 clock-names = "core", "clkin0", "clkin1";
878 clock-names = "core", "clkin0", "clkin1";
886 clock-names = "core", "clkin0", "clkin1";
898 clock-names = "core";
900 num-cs = <1>;
909 clock-names = "xtal", "pclk", "baud";
914 clock-names = "xtal", "pclk", "baud";
919 clock-names = "xtal", "pclk", "baud";
924 clock-names = "xtal", "pclk", "baud";
929 clock-names = "xtal", "pclk", "baud";
933 compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
934 power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
938 compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec";
943 clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc";
945 reset-names = "esparser";