Lines Matching +full:cap +full:- +full:mmc +full:- +full:highspeed

1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-gxl-s905x.dtsi"
13 	compatible = "nexbox,a95x", "amlogic,s905x", "amlogic,meson-gxl";
22 		stdout-path = "serial0:115200n8";
30 	vddio_card: gpio-regulator {
31 		compatible = "regulator-gpio";
33 		regulator-name = "VDDIO_CARD";
34 		regulator-min-microvolt = <1800000>;
35 		regulator-max-microvolt = <3300000>;
38 		gpios-states = <1>;
45 	vddio_boot: regulator-vddio-boot {
46 		compatible = "regulator-fixed";
47 		regulator-name = "VDDIO_BOOT";
48 		regulator-min-microvolt = <1800000>;
49 		regulator-max-microvolt = <1800000>;
52 	vddao_3v3: regulator-vddao-3v3 {
53 		compatible = "regulator-fixed";
54 		regulator-name = "VDDAO_3V3";
55 		regulator-min-microvolt = <3300000>;
56 		regulator-max-microvolt = <3300000>;
59 	vcc_3v3: regulator-vcc-3v3 {
60 		compatible = "regulator-fixed";
61 		regulator-name = "VCC_3V3";
62 		regulator-min-microvolt = <3300000>;
63 		regulator-max-microvolt = <3300000>;
66 	emmc_pwrseq: emmc-pwrseq {
67 		compatible = "mmc-pwrseq-emmc";
68 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
72 		compatible = "pwm-clock";
73 		#clock-cells = <0>;
74 		clock-frequency = <32768>;
78 	sdio_pwrseq: sdio-pwrseq {
79 		compatible = "mmc-pwrseq-simple";
80 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
82 		clock-names = "ext_clock";
85 	cvbs-connector {
86 		compatible = "composite-video-connector";
90 				remote-endpoint = <&cvbs_vdac_out>;
95 	hdmi-connector {
96 		compatible = "hdmi-connector";
101 				remote-endpoint = <&hdmi_tx_tmds_out>;
109 	pinctrl-0 = <&ao_cec_pins>;
110 	pinctrl-names = "default";
111 	hdmi-phandle = <&hdmi_tx>;
116 		remote-endpoint = <&cvbs_connector_in>;
122 	phy-mode = "rmii";
123 	phy-handle = <&internal_phy>;
128 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
129 	pinctrl-names = "default";
134 		remote-endpoint = <&hdmi_connector_in>;
140 	pinctrl-0 = <&remote_input_ao_pins>;
141 	pinctrl-names = "default";
146 	pinctrl-0 = <&pwm_e_pins>;
147 	pinctrl-names = "default";
149 	clock-names = "clkin0";
155 	pinctrl-0 = <&sdio_pins>;
156 	pinctrl-1 = <&sdio_clk_gate_pins>;
157 	pinctrl-names = "default", "clk-gate";
158 	#address-cells = <1>;
159 	#size-cells = <0>;
161 	bus-width = <4>;
162 	cap-sd-highspeed;
163 	max-frequency = <100000000>;
165 	non-removable;
166 	disable-wp;
169 	keep-power-in-suspend;
171 	mmc-pwrseq = <&sdio_pwrseq>;
173 	vmmc-supply = <&vddao_3v3>;
174 	vqmmc-supply = <&vddio_boot>;
180 	pinctrl-0 = <&sdcard_pins>;
181 	pinctrl-1 = <&sdcard_clk_gate_pins>;
182 	pinctrl-names = "default", "clk-gate";
184 	bus-width = <4>;
185 	cap-sd-highspeed;
186 	max-frequency = <50000000>;
187 	disable-wp;
189 	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
191 	vmmc-supply = <&vddao_3v3>;
192 	vqmmc-supply = <&vddio_card>;
198 	pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
199 	pinctrl-1 = <&emmc_clk_gate_pins>;
200 	pinctrl-names = "default", "clk-gate";
202 	bus-width = <8>;
203 	cap-mmc-highspeed;
204 	max-frequency = <200000000>;
205 	non-removable;
206 	disable-wp;
207 	mmc-ddr-1_8v;
208 	mmc-hs200-1_8v;
210 	mmc-pwrseq = <&emmc_pwrseq>;
211 	vmmc-supply = <&vcc_3v3>;
212 	vqmmc-supply = <&vddio_boot>;
217 	pinctrl-0 = <&uart_ao_a_pins>;
218 	pinctrl-names = "default";