Lines Matching +full:pwrseq +full:- +full:simple
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/sound/meson-aiu.h>
13 #include "meson-gxl-s805x.dtsi"
16 compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl";
25 au2: analog-amplifier {
26 compatible = "simple-audio-amplifier";
27 sound-name-prefix = "AU2";
28 VCC-supply = <&vcc_5v>;
29 enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
33 stdout-path = "serial0:115200n8";
36 cvbs-connector {
37 compatible = "composite-video-connector";
41 remote-endpoint = <&cvbs_vdac_out>;
46 emmc_pwrseq: emmc-pwrseq {
47 compatible = "mmc-pwrseq-emmc";
48 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
51 hdmi-connector {
52 compatible = "hdmi-connector";
57 remote-endpoint = <&hdmi_tx_tmds_out>;
67 vddio_boot: regulator-vddio-boot {
68 compatible = "regulator-fixed";
69 regulator-name = "VDDIO_BOOT";
70 regulator-min-microvolt = <1800000>;
71 regulator-max-microvolt = <1800000>;
74 vddao_3v3: regulator-vddao-3v3 {
75 compatible = "regulator-fixed";
76 regulator-name = "VDDAO_3V3";
77 regulator-min-microvolt = <3300000>;
78 regulator-max-microvolt = <3300000>;
81 vddio_ao18: regulator-vddio-ao18 {
82 compatible = "regulator-fixed";
83 regulator-name = "VDDIO_AO18";
84 regulator-min-microvolt = <1800000>;
85 regulator-max-microvolt = <1800000>;
88 vcc_3v3: regulator-vcc-3v3 {
89 compatible = "regulator-fixed";
90 regulator-name = "VCC_3V3";
91 regulator-min-microvolt = <3300000>;
92 regulator-max-microvolt = <3300000>;
95 vcc_5v: regulator-vcc-5v {
96 compatible = "regulator-fixed";
97 regulator-name = "VCC_5V";
98 regulator-min-microvolt = <5000000>;
99 regulator-max-microvolt = <5000000>;
103 emmc_pwrseq: emmc-pwrseq {
104 compatible = "mmc-pwrseq-emmc";
105 reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
109 compatible = "pwm-clock";
110 #clock-cells = <0>;
111 clock-frequency = <32768>;
115 sdio_pwrseq: sdio-pwrseq {
116 compatible = "mmc-pwrseq-simple";
117 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
119 clock-names = "ext_clock";
123 compatible = "amlogic,gx-sound-card";
124 model = "GXL-P241";
125 audio-aux-devs = <&au2>;
126 audio-widgets = "Line", "Lineout";
127 audio-routing = "AU2 INL", "ACODEC LOLN",
135 assigned-clocks = <&clkc CLKID_MPLL0>,
138 assigned-clock-parents = <0>, <0>, <0>;
139 assigned-clock-rates = <294912000>,
143 dai-link-0 {
144 sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
147 dai-link-1 {
148 sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
149 dai-format = "i2s";
150 mclk-fs = <256>;
152 codec-0 {
153 sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
156 codec-1 {
157 sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
161 dai-link-2 {
162 sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
164 codec-0 {
165 sound-dai = <&hdmi_tx>;
169 dai-link-3 {
170 sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
172 codec-0 {
173 sound-dai = <&acodec>;
180 AVDD-supply = <&vddio_ao18>;
190 pinctrl-0 = <&ao_cec_pins>;
191 pinctrl-names = "default";
192 hdmi-phandle = <&hdmi_tx>;
197 remote-endpoint = <&cvbs_connector_in>;
206 pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
207 pinctrl-names = "default";
212 pinctrl-0 = <&remote_input_ao_pins>;
213 pinctrl-names = "default";
218 pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
219 pinctrl-names = "default";
220 hdmi-supply = <&vcc_5v>;
225 remote-endpoint = <&hdmi_connector_in>;
231 vref-supply = <&vddio_ao18>;
237 pinctrl-0 = <&sdio_pins>;
238 pinctrl-1 = <&sdio_clk_gate_pins>;
239 pinctrl-names = "default", "clk-gate";
240 #address-cells = <1>;
241 #size-cells = <0>;
243 bus-width = <4>;
244 cap-sd-highspeed;
245 max-frequency = <50000000>;
247 non-removable;
248 disable-wp;
251 keep-power-in-suspend;
253 mmc-pwrseq = <&sdio_pwrseq>;
255 vmmc-supply = <&vddao_3v3>;
256 vqmmc-supply = <&vddio_boot>;
262 pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
263 pinctrl-1 = <&emmc_clk_gate_pins>;
264 pinctrl-names = "default", "clk-gate";
266 bus-width = <8>;
267 cap-mmc-highspeed;
268 max-frequency = <200000000>;
269 non-removable;
270 disable-wp;
271 mmc-ddr-1_8v;
272 mmc-hs200-1_8v;
274 mmc-pwrseq = <&emmc_pwrseq>;
275 vmmc-supply = <&vcc_3v3>;
276 vqmmc-supply = <&vddio_boot>;
281 pinctrl-0 = <&pwm_e_pins>;
282 pinctrl-names = "default";
284 clock-names = "clkin0";
290 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
291 pinctrl-names = "default";
292 uart-has-rtscts;
297 pinctrl-0 = <&uart_ao_a_pins>;
298 pinctrl-names = "default";
307 phy-supply = <&vcc_5v>;