Lines Matching +full:bus +full:- +full:range +full:- +full:microvolt
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
10 #include "meson-g12b.dtsi"
11 #include "meson-g12b-s922x.dtsi"
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/gpio/meson-g12a-gpio.h>
22 stdout-path = "serial0:115200n8";
30 emmc_pwrseq: emmc-pwrseq {
31 compatible = "mmc-pwrseq-emmc";
32 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
35 sdio_pwrseq: sdio-pwrseq {
36 compatible = "mmc-pwrseq-simple";
37 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
39 clock-names = "ext_clock";
42 flash_1v8: regulator-flash-1v8 {
43 compatible = "regulator-fixed";
44 regulator-name = "FLASH_1V8";
45 regulator-min-microvolt = <1800000>;
46 regulator-max-microvolt = <1800000>;
47 vin-supply = <&vcc_3v3>;
48 regulator-always-on;
51 main_12v: regulator-main-12v {
52 compatible = "regulator-fixed";
53 regulator-name = "12V";
54 regulator-min-microvolt = <12000000>;
55 regulator-max-microvolt = <12000000>;
56 regulator-always-on;
59 vcc_5v: regulator-vcc-5v {
60 compatible = "regulator-fixed";
61 regulator-name = "VCC_5V";
62 regulator-min-microvolt = <5000000>;
63 regulator-max-microvolt = <5000000>;
64 vin-supply = <&main_12v>;
67 enable-active-high;
70 vcc_1v8: regulator-vcc-1v8 {
71 compatible = "regulator-fixed";
72 regulator-name = "VCC_1V8";
73 regulator-min-microvolt = <1800000>;
74 regulator-max-microvolt = <1800000>;
75 vin-supply = <&vcc_3v3>;
76 regulator-always-on;
79 vcc_3v3: regulator-vcc-3v3 {
80 compatible = "regulator-fixed";
81 regulator-name = "VCC_3V3";
82 regulator-min-microvolt = <3300000>;
83 regulator-max-microvolt = <3300000>;
84 vin-supply = <&vddao_3v3>;
85 regulator-always-on;
89 vddcpu_a: regulator-vddcpu-a {
93 compatible = "pwm-regulator";
95 regulator-name = "VDDCPU_A";
96 regulator-min-microvolt = <721000>;
97 regulator-max-microvolt = <1022000>;
99 pwm-supply = <&main_12v>;
102 pwm-dutycycle-range = <100 0>;
104 regulator-boot-on;
105 regulator-always-on;
108 vddcpu_b: regulator-vddcpu-b {
112 compatible = "pwm-regulator";
114 regulator-name = "VDDCPU_B";
115 regulator-min-microvolt = <721000>;
116 regulator-max-microvolt = <1022000>;
118 pwm-supply = <&main_12v>;
121 pwm-dutycycle-range = <100 0>;
123 regulator-boot-on;
124 regulator-always-on;
127 usb1_pow: regulator-usb1-pow {
128 compatible = "regulator-fixed";
129 regulator-name = "USB1_POW";
130 regulator-min-microvolt = <5000000>;
131 regulator-max-microvolt = <5000000>;
132 vin-supply = <&vcc_5v>;
136 enable-active-high;
139 usb_pwr_en: regulator-usb-pwr-en {
140 compatible = "regulator-fixed";
141 regulator-name = "USB_PWR_EN";
142 regulator-min-microvolt = <5000000>;
143 regulator-max-microvolt = <5000000>;
144 vin-supply = <&vcc_5v>;
146 /* Connected to USB3 Type-A Port power enable */
148 enable-active-high;
151 vddao_1v8: regulator-vddao-1v8 {
152 compatible = "regulator-fixed";
153 regulator-name = "VDDAO_1V8";
154 regulator-min-microvolt = <1800000>;
155 regulator-max-microvolt = <1800000>;
156 vin-supply = <&vddao_3v3>;
157 regulator-always-on;
160 vddao_3v3: regulator-vddao-3v3 {
161 compatible = "regulator-fixed";
162 regulator-name = "VDDAO_3V3";
163 regulator-min-microvolt = <3300000>;
164 regulator-max-microvolt = <3300000>;
165 vin-supply = <&main_12v>;
166 regulator-always-on;
169 cvbs-connector {
170 compatible = "composite-video-connector";
174 remote-endpoint = <&cvbs_vdac_out>;
179 hdmi-connector {
180 compatible = "hdmi-connector";
185 remote-endpoint = <&hdmi_tx_tmds_out>;
191 compatible = "pwm-clock";
192 #clock-cells = <0>;
193 clock-frequency = <32768>;
199 pinctrl-0 = <&cec_ao_a_h_pins>;
200 pinctrl-names = "default";
202 hdmi-phandle = <&hdmi_tx>;
206 pinctrl-0 = <&cec_ao_b_h_pins>;
207 pinctrl-names = "default";
209 hdmi-phandle = <&hdmi_tx>;
213 cpu-supply = <&vddcpu_b>;
214 operating-points-v2 = <&cpu_opp_table_0>;
219 cpu-supply = <&vddcpu_b>;
220 operating-points-v2 = <&cpu_opp_table_0>;
225 cpu-supply = <&vddcpu_a>;
226 operating-points-v2 = <&cpub_opp_table_1>;
231 cpu-supply = <&vddcpu_a>;
232 operating-points-v2 = <&cpub_opp_table_1>;
237 cpu-supply = <&vddcpu_a>;
238 operating-points-v2 = <&cpub_opp_table_1>;
243 cpu-supply = <&vddcpu_a>;
244 operating-points-v2 = <&cpub_opp_table_1>;
250 remote-endpoint = <&cvbs_connector_in>;
255 external_phy: ethernet-phy@0 {
258 max-speed = <1000>;
260 reset-assert-us = <10000>;
261 reset-deassert-us = <80000>;
262 reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
264 interrupt-parent = <&gpio_intc>;
271 pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
272 pinctrl-names = "default";
274 phy-mode = "rgmii";
275 phy-handle = <&external_phy>;
276 amlogic,tx-delay-ns = <2>;
281 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
282 pinctrl-names = "default";
283 hdmi-supply = <&vcc_5v>;
288 remote-endpoint = <&hdmi_connector_in>;
294 pinctrl-0 = <&remote_input_ao_pins>;
295 pinctrl-names = "default";
299 pinctrl-0 = <&pwm_a_e_pins>;
300 pinctrl-names = "default";
305 pinctrl-0 = <&pwm_ao_d_e_pins>;
306 pinctrl-names = "default";
311 pinctrl-0 = <&pwm_e_pins>;
312 pinctrl-names = "default";
319 pinctrl-0 = <&sdio_pins>;
320 pinctrl-1 = <&sdio_clk_gate_pins>;
321 pinctrl-names = "default", "clk-gate";
322 #address-cells = <1>;
323 #size-cells = <0>;
325 bus-width = <4>;
326 cap-sd-highspeed;
327 max-frequency = <100000000>;
330 keep-power-in-suspend;
332 non-removable;
333 disable-wp;
335 mmc-pwrseq = <&sdio_pwrseq>;
337 vmmc-supply = <&vddao_3v3>;
338 vqmmc-supply = <&vddao_1v8>;
342 compatible = "brcm,bcm4329-fmac";
349 pinctrl-0 = <&sdcard_c_pins>;
350 pinctrl-1 = <&sdcard_clk_gate_c_pins>;
351 pinctrl-names = "default", "clk-gate";
353 bus-width = <4>;
354 cap-sd-highspeed;
355 max-frequency = <50000000>;
356 disable-wp;
358 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
359 vmmc-supply = <&vddao_3v3>;
360 vqmmc-supply = <&vddao_3v3>;
366 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
367 pinctrl-1 = <&emmc_clk_gate_pins>;
368 pinctrl-names = "default", "clk-gate";
370 bus-width = <8>;
371 cap-mmc-highspeed;
372 max-frequency = <100000000>;
373 disable-wp;
375 mmc-pwrseq = <&emmc_pwrseq>;
376 vmmc-supply = <&vcc_3v3>;
377 vqmmc-supply = <&flash_1v8>;
382 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
383 pinctrl-names = "default";
384 uart-has-rtscts;
387 compatible = "brcm,bcm43438-bt";
388 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
389 max-speed = <2000000>;
391 clock-names = "lpo";
397 pinctrl-0 = <&uart_ao_a_pins>;
398 pinctrl-names = "default";
404 vbus-supply = <&usb_pwr_en>;
408 phy-supply = <&usb1_pow>;
412 phy-supply = <&usb1_pow>;