Lines Matching +full:vpll +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
7 /dts-v1/;
9 #include "meson-g12b-bananapi-cm4.dtsi"
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/leds/common.h>
12 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
15 model = "MNT Reform 2 with BPI-CM4 Module";
16 compatible = "mntre,reform2-cm4", "bananapi,bpi-cm4", "amlogic,a311d", "amlogic,g12b";
17 chassis-type = "laptop";
25 hdmi_connector: hdmi-connector {
26 compatible = "hdmi-connector";
31 remote-endpoint = <&hdmi_tx_tmds_out>;
37 compatible = "gpio-leds";
39 led-blue {
43 linux,default-trigger = "heartbeat";
46 led-green {
54 compatible = "amlogic,axg-sound-card";
55 model = "MNT-REFORM2-BPI-CM4";
56 audio-widgets = "Headphone", "Headphone Jack",
59 audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmin_b>;
60 audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
86 assigned-clocks = <&clkc CLKID_MPLL2>,
89 assigned-clock-parents = <0>, <0>, <0>;
90 assigned-clock-rates = <294912000>,
94 dai-link-0 {
95 sound-dai = <&frddr_a>;
98 dai-link-1 {
99 sound-dai = <&frddr_b>;
102 dai-link-2 {
103 sound-dai = <&frddr_c>;
106 dai-link-3 {
107 sound-dai = <&toddr_a>;
110 dai-link-4 {
111 sound-dai = <&toddr_b>;
114 dai-link-5 {
115 sound-dai = <&toddr_c>;
119 dai-link-6 {
120 sound-dai = <&tdmif_a>;
121 dai-format = "i2s";
122 dai-tdm-slot-tx-mask-0 = <1 1>;
123 dai-tdm-slot-tx-mask-1 = <1 1>;
124 dai-tdm-slot-tx-mask-2 = <1 1>;
125 dai-tdm-slot-tx-mask-3 = <1 1>;
126 mclk-fs = <256>;
129 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
134 dai-link-7 {
135 sound-dai = <&tdmif_b>;
136 dai-format = "i2s";
137 dai-tdm-slot-tx-mask-0 = <1 1>;
138 mclk-fs = <256>;
141 sound-dai = <&wm8960>;
146 dai-link-8 {
147 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
150 sound-dai = <&hdmi_tx>;
155 reg_main_1v8: regulator-main-1v8 {
156 compatible = "regulator-fixed";
157 regulator-name = "1V8";
158 regulator-min-microvolt = <1800000>;
159 regulator-max-microvolt = <1800000>;
160 vin-supply = <®_main_3v3>;
163 reg_main_1v2: regulator-main-1v2 {
164 compatible = "regulator-fixed";
165 regulator-name = "1V2";
166 regulator-min-microvolt = <1200000>;
167 regulator-max-microvolt = <1200000>;
168 vin-supply = <®_main_5v>;
171 reg_main_3v3: regulator-main-3v3 {
172 compatible = "regulator-fixed";
173 regulator-name = "3V3";
174 regulator-min-microvolt = <3300000>;
175 regulator-max-microvolt = <3300000>;
178 reg_main_5v: regulator-main-5v {
179 compatible = "regulator-fixed";
180 regulator-name = "5V";
181 regulator-min-microvolt = <5000000>;
182 regulator-max-microvolt = <5000000>;
185 reg_main_usb: regulator-main-usb {
186 compatible = "regulator-fixed";
187 regulator-name = "USB_PWR";
188 regulator-min-microvolt = <5000000>;
189 regulator-max-microvolt = <5000000>;
190 vin-supply = <®_main_5v>;
194 compatible = "pwm-backlight";
196 power-supply = <®_main_usb>;
197 enable-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
198 brightness-levels = <0 32 64 128 160 200 255>;
199 default-brightness-level = <6>;
203 compatible = "innolux,n125hce-gn1";
204 power-supply = <®_main_3v3>;
206 no-hpd;
210 remote-endpoint = <&edp_bridge_out>;
216 compatible = "fixed-clock";
217 #clock-cells = <0>;
218 clock-frequency = <12288000>;
233 assigned-clocks = <&clkc CLKID_GP0_PLL>,
238 assigned-clock-parents = <0>,
243 assigned-clock-rates = <936000000>,
252 remote-endpoint = <&edp_bridge_in>;
270 remote-endpoint = <&hdmi_connector_in>;
275 pinctrl-names = "default";
276 pinctrl-0 = <&pwm_ao_a_pins>;
290 enable-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_HIGH>; // PIN_24 / GPIO8
291 vccio-supply = <®_main_1v8>;
292 vpll-supply = <®_main_1v8>;
293 vcca-supply = <®_main_1v2>;
294 vcc-supply = <®_main_1v2>;
297 #address-cells = <1>;
298 #size-cells = <0>;
304 remote-endpoint = <&mipi_dsi_out>;
312 remote-endpoint = <&panel_in>;
326 clock-names = "mclk";
327 #sound-dai-cells = <0>;
328 wlf,shared-lrclk;
354 pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
355 pinctrl-names = "default";
357 assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
359 assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
361 assigned-clock-rates = <0>, <0>;