Lines Matching +full:meson +full:- +full:g12a +full:- +full:usb
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-g12a.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
11 #include <dt-bindings/gpio/meson-g12a-gpio.h>
12 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
15 compatible = "seirobotics,sei510", "amlogic,g12a";
19 compatible = "adc-keys";
20 io-channels = <&saradc 0>;
21 io-channel-names = "buttons";
22 keyup-threshold-microvolt = <1800000>;
24 button-onoff {
27 press-threshold-microvolt = <1700000>;
36 mono_dac: audio-codec-0 {
38 #sound-dai-cells = <0>;
39 sound-name-prefix = "U16";
40 sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>;
43 dmics: audio-codec-1 {
44 #sound-dai-cells = <0>;
45 compatible = "dmic-codec";
46 num-channels = <2>;
47 wakeup-delay-ms = <50>;
48 sound-name-prefix = "MIC";
52 stdout-path = "serial0:115200n8";
55 cvbs-connector {
56 compatible = "composite-video-connector";
60 remote-endpoint = <&cvbs_vdac_out>;
65 emmc_pwrseq: emmc-pwrseq {
66 compatible = "mmc-pwrseq-emmc";
67 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
70 hdmi-connector {
71 compatible = "hdmi-connector";
76 remote-endpoint = <&hdmi_tx_tmds_out>;
86 ao_5v: regulator-ao-5v {
87 compatible = "regulator-fixed";
88 regulator-name = "AO_5V";
89 regulator-min-microvolt = <5000000>;
90 regulator-max-microvolt = <5000000>;
91 vin-supply = <&dc_in>;
92 regulator-always-on;
95 dc_in: regulator-dc-in {
96 compatible = "regulator-fixed";
97 regulator-name = "DC_IN";
98 regulator-min-microvolt = <5000000>;
99 regulator-max-microvolt = <5000000>;
100 regulator-always-on;
103 emmc_1v8: regulator-emmc-1v8 {
104 compatible = "regulator-fixed";
105 regulator-name = "EMMC_1V8";
106 regulator-min-microvolt = <1800000>;
107 regulator-max-microvolt = <1800000>;
108 vin-supply = <&vddao_3v3>;
109 regulator-always-on;
112 vddao_3v3: regulator-vddao-3v3 {
113 compatible = "regulator-fixed";
114 regulator-name = "VDDAO_3V3";
115 regulator-min-microvolt = <3300000>;
116 regulator-max-microvolt = <3300000>;
117 vin-supply = <&dc_in>;
118 regulator-always-on;
121 vddao_3v3_t: regulator-vddao-3v3-t {
122 compatible = "regulator-fixed";
123 regulator-name = "VDDAO_3V3_T";
124 regulator-min-microvolt = <3300000>;
125 regulator-max-microvolt = <3300000>;
126 vin-supply = <&vddao_3v3>;
128 enable-active-high;
131 vddcpu: regulator-vddcpu {
135 compatible = "pwm-regulator";
137 regulator-name = "VDDCPU";
138 regulator-min-microvolt = <721000>;
139 regulator-max-microvolt = <1022000>;
141 pwm-supply = <&dc_in>;
144 pwm-dutycycle-range = <100 0>;
146 regulator-boot-on;
147 regulator-always-on;
150 vddio_ao1v8: regulator-vddio-ao1v8 {
151 compatible = "regulator-fixed";
152 regulator-name = "VDDIO_AO1V8";
153 regulator-min-microvolt = <1800000>;
154 regulator-max-microvolt = <1800000>;
155 vin-supply = <&vddao_3v3>;
156 regulator-always-on;
159 sdio_pwrseq: sdio-pwrseq {
160 compatible = "mmc-pwrseq-simple";
161 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
163 clock-names = "ext_clock";
167 compatible = "pwm-clock";
168 #clock-cells = <0>;
169 clock-frequency = <32768>;
174 compatible = "amlogic,axg-sound-card";
176 audio-aux-devs = <&tdmout_a>, <&tdmout_b>,
178 audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
208 assigned-clocks = <&clkc CLKID_MPLL2>,
211 assigned-clock-parents = <0>, <0>, <0>;
212 assigned-clock-rates = <294912000>,
216 dai-link-0 {
217 sound-dai = <&frddr_a>;
220 dai-link-1 {
221 sound-dai = <&frddr_b>;
224 dai-link-2 {
225 sound-dai = <&frddr_c>;
228 dai-link-3 {
229 sound-dai = <&toddr_a>;
232 dai-link-4 {
233 sound-dai = <&toddr_b>;
236 dai-link-5 {
237 sound-dai = <&toddr_c>;
241 dai-link-6 {
242 sound-dai = <&tdmif_a>;
243 dai-format = "i2s";
244 dai-tdm-slot-tx-mask-0 = <1 1>;
245 mclk-fs = <256>;
247 codec-0 {
248 sound-dai = <&mono_dac>;
251 codec-1 {
252 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
257 dai-link-7 {
258 sound-dai = <&tdmif_b>;
259 dai-format = "i2s";
260 dai-tdm-slot-tx-mask-0 = <1 1>;
261 dai-tdm-slot-tx-mask-1 = <1 1>;
262 dai-tdm-slot-tx-mask-2 = <1 1>;
263 dai-tdm-slot-tx-mask-3 = <1 1>;
264 mclk-fs = <256>;
267 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
272 dai-link-8 {
273 sound-dai = <&pdm>;
276 sound-dai = <&dmics>;
281 dai-link-9 {
282 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
285 sound-dai = <&hdmi_tx>;
296 pinctrl-0 = <&cec_ao_a_h_pins>;
297 pinctrl-names = "default";
299 hdmi-phandle = <&hdmi_tx>;
303 pinctrl-0 = <&cec_ao_b_h_pins>;
304 pinctrl-names = "default";
306 hdmi-phandle = <&hdmi_tx>;
314 cpu-supply = <&vddcpu>;
315 operating-points-v2 = <&cpu_opp_table>;
317 clock-latency = <50000>;
321 cpu-supply = <&vddcpu>;
322 operating-points-v2 = <&cpu_opp_table>;
324 clock-latency = <50000>;
328 cpu-supply = <&vddcpu>;
329 operating-points-v2 = <&cpu_opp_table>;
331 clock-latency = <50000>;
335 cpu-supply = <&vddcpu>;
336 operating-points-v2 = <&cpu_opp_table>;
338 clock-latency = <50000>;
343 remote-endpoint = <&cvbs_connector_in>;
349 phy-handle = <&internal_ephy>;
350 phy-mode = "rmii";
367 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
368 pinctrl-names = "default";
373 remote-endpoint = <&hdmi_connector_in>;
379 pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
380 pinctrl-names = "default";
385 pinctrl-0 = <&remote_input_ao_pins>;
386 pinctrl-names = "default";
390 pinctrl-0 = <&pwm_ao_d_e_pins>;
391 pinctrl-names = "default";
393 clock-names = "clkin1";
399 pinctrl-0 = <&pwm_e_pins>;
400 pinctrl-names = "default";
402 clock-names = "clkin0";
406 pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>,
409 pinctrl-names = "default";
415 vref-supply = <&vddio_ao1v8>;
421 pinctrl-0 = <&sdio_pins>;
422 pinctrl-1 = <&sdio_clk_gate_pins>;
423 pinctrl-names = "default", "clk-gate";
424 #address-cells = <1>;
425 #size-cells = <0>;
427 bus-width = <4>;
428 cap-sd-highspeed;
429 sd-uhs-sdr50;
430 max-frequency = <100000000>;
432 non-removable;
433 disable-wp;
436 keep-power-in-suspend;
438 mmc-pwrseq = <&sdio_pwrseq>;
440 vmmc-supply = <&vddao_3v3>;
441 vqmmc-supply = <&vddio_ao1v8>;
445 compatible = "brcm,bcm4329-fmac";
452 pinctrl-0 = <&sdcard_c_pins>;
453 pinctrl-1 = <&sdcard_clk_gate_c_pins>;
454 pinctrl-names = "default", "clk-gate";
456 bus-width = <4>;
457 cap-sd-highspeed;
458 max-frequency = <50000000>;
459 disable-wp;
461 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
462 vmmc-supply = <&vddao_3v3>;
463 vqmmc-supply = <&vddao_3v3>;
469 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
470 pinctrl-1 = <&emmc_clk_gate_pins>;
471 pinctrl-names = "default", "clk-gate";
473 bus-width = <8>;
474 cap-mmc-highspeed;
475 mmc-ddr-1_8v;
476 mmc-hs200-1_8v;
477 max-frequency = <200000000>;
478 non-removable;
479 disable-wp;
481 mmc-pwrseq = <&emmc_pwrseq>;
482 vmmc-supply = <&vddao_3v3>;
483 vqmmc-supply = <&emmc_1v8>;
487 pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>;
488 pinctrl-names = "default";
491 assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>,
493 assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>,
495 assigned-clock-rates = <0>, <0>;
536 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
537 pinctrl-names = "default";
538 uart-has-rtscts;
541 compatible = "brcm,bcm43438-bt";
542 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
543 max-speed = <2000000>;
545 clock-names = "lpo";
546 vbat-supply = <&vddao_3v3>;
547 vddio-supply = <&vddio_ao1v8>;
553 pinctrl-0 = <&uart_ao_a_pins>;
554 pinctrl-names = "default";
557 &usb {