Lines Matching +full:meson +full:- +full:g12a +full:- +full:usb
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include "meson-g12a.dtsi"
9 #include <dt-bindings/gpio/meson-g12a-gpio.h>
10 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
13 compatible = "radxa,zero", "amlogic,g12a";
21 stdout-path = "serial0:115200n8";
29 cvbs-connector {
31 compatible = "composite-video-connector";
35 remote-endpoint = <&cvbs_vdac_out>;
40 hdmi-connector {
41 compatible = "hdmi-connector";
46 remote-endpoint = <&hdmi_tx_tmds_out>;
51 emmc_pwrseq: emmc-pwrseq {
52 compatible = "mmc-pwrseq-emmc";
53 reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
56 sdio_pwrseq: sdio-pwrseq {
57 compatible = "mmc-pwrseq-simple";
58 reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
60 clock-names = "ext_clock";
63 ao_5v: regulator-ao-5v {
64 compatible = "regulator-fixed";
65 regulator-name = "AO_5V";
66 regulator-min-microvolt = <5000000>;
67 regulator-max-microvolt = <5000000>;
68 regulator-always-on;
71 vcc_1v8: regulator-vcc-1v8 {
72 compatible = "regulator-fixed";
73 regulator-name = "VCC_1V8";
74 regulator-min-microvolt = <1800000>;
75 regulator-max-microvolt = <1800000>;
76 vin-supply = <&vcc_3v3>;
77 regulator-always-on;
80 vcc_3v3: regulator-vcc-3v3 {
81 compatible = "regulator-fixed";
82 regulator-name = "VCC_3V3";
83 regulator-min-microvolt = <3300000>;
84 regulator-max-microvolt = <3300000>;
85 vin-supply = <&vddao_3v3>;
86 regulator-always-on;
89 hdmi_pw: regulator-hdmi-pw {
90 compatible = "regulator-fixed";
91 regulator-name = "HDMI_PW";
92 regulator-min-microvolt = <5000000>;
93 regulator-max-microvolt = <5000000>;
94 vin-supply = <&ao_5v>;
95 regulator-always-on;
98 vddao_1v8: regulator-vddao-1v8 {
99 compatible = "regulator-fixed";
100 regulator-name = "VDDAO_1V8";
101 regulator-min-microvolt = <1800000>;
102 regulator-max-microvolt = <1800000>;
103 vin-supply = <&vddao_3v3>;
104 regulator-always-on;
107 vddao_3v3: regulator-vddao-3v3 {
108 compatible = "regulator-fixed";
109 regulator-name = "VDDAO_3V3";
110 regulator-min-microvolt = <3300000>;
111 regulator-max-microvolt = <3300000>;
112 vin-supply = <&ao_5v>;
113 regulator-always-on;
116 vddcpu: regulator-vddcpu {
117 compatible = "pwm-regulator";
119 regulator-name = "VDDCPU";
120 regulator-min-microvolt = <721000>;
121 regulator-max-microvolt = <1022000>;
123 vin-supply = <&ao_5v>;
126 pwm-dutycycle-range = <100 0>;
128 regulator-boot-on;
129 regulator-always-on;
133 compatible = "amlogic,axg-sound-card";
134 model = "RADXA-ZERO";
135 audio-aux-devs = <&tdmout_b>;
136 audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
145 assigned-clocks = <&clkc CLKID_MPLL2>,
148 assigned-clock-parents = <0>, <0>, <0>;
149 assigned-clock-rates = <294912000>,
153 dai-link-0 {
154 sound-dai = <&frddr_a>;
157 dai-link-1 {
158 sound-dai = <&frddr_b>;
161 dai-link-2 {
162 sound-dai = <&frddr_c>;
166 dai-link-3 {
167 sound-dai = <&tdmif_b>;
168 dai-format = "i2s";
169 dai-tdm-slot-tx-mask-0 = <1 1>;
170 dai-tdm-slot-tx-mask-1 = <1 1>;
171 dai-tdm-slot-tx-mask-2 = <1 1>;
172 dai-tdm-slot-tx-mask-3 = <1 1>;
173 mclk-fs = <256>;
176 sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
180 dai-link-4 {
181 sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
184 sound-dai = <&hdmi_tx>;
190 compatible = "pwm-clock";
191 #clock-cells = <0>;
192 clock-frequency = <32768>;
202 pinctrl-0 = <&cec_ao_a_h_pins>;
203 pinctrl-names = "default";
205 hdmi-phandle = <&hdmi_tx>;
209 pinctrl-0 = <&cec_ao_b_h_pins>;
210 pinctrl-names = "default";
212 hdmi-phandle = <&hdmi_tx>;
220 cpu-supply = <&vddcpu>;
221 operating-points-v2 = <&cpu_opp_table>;
223 clock-latency = <50000>;
227 cpu-supply = <&vddcpu>;
228 operating-points-v2 = <&cpu_opp_table>;
230 clock-latency = <50000>;
234 cpu-supply = <&vddcpu>;
235 operating-points-v2 = <&cpu_opp_table>;
237 clock-latency = <50000>;
241 cpu-supply = <&vddcpu>;
242 operating-points-v2 = <&cpu_opp_table>;
244 clock-latency = <50000>;
249 remote-endpoint = <&cvbs_connector_in>;
267 pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
268 pinctrl-names = "default";
269 hdmi-supply = <&hdmi_pw>;
274 remote-endpoint = <&hdmi_connector_in>;
280 pinctrl-0 = <&remote_input_ao_pins>;
281 pinctrl-names = "default";
285 pinctrl-0 = <&pwm_ao_d_e_pins>;
286 pinctrl-names = "default";
288 clock-names = "clkin1";
294 pinctrl-0 = <&pwm_e_pins>;
295 pinctrl-names = "default";
297 clock-names = "clkin0";
302 vref-supply = <&vddao_1v8>;
308 pinctrl-0 = <&sdio_pins>;
309 pinctrl-1 = <&sdio_clk_gate_pins>;
310 pinctrl-names = "default", "clk-gate";
311 #address-cells = <1>;
312 #size-cells = <0>;
314 bus-width = <4>;
315 cap-sd-highspeed;
316 sd-uhs-sdr50;
317 max-frequency = <100000000>;
319 non-removable;
320 disable-wp;
323 keep-power-in-suspend;
325 mmc-pwrseq = <&sdio_pwrseq>;
327 vmmc-supply = <&vddao_3v3>;
328 vqmmc-supply = <&vddao_1v8>;
332 compatible = "brcm,bcm4329-fmac";
339 pinctrl-0 = <&sdcard_c_pins>;
340 pinctrl-1 = <&sdcard_clk_gate_c_pins>;
341 pinctrl-names = "default", "clk-gate";
343 bus-width = <4>;
344 cap-sd-highspeed;
345 max-frequency = <100000000>;
346 disable-wp;
348 cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
349 vmmc-supply = <&vddao_3v3>;
350 vqmmc-supply = <&vddao_3v3>;
356 pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
357 pinctrl-1 = <&emmc_clk_gate_pins>;
358 pinctrl-names = "default", "clk-gate";
360 bus-width = <8>;
361 cap-mmc-highspeed;
362 mmc-ddr-1_8v;
363 mmc-hs200-1_8v;
364 max-frequency = <200000000>;
365 disable-wp;
367 mmc-pwrseq = <&emmc_pwrseq>;
368 vmmc-supply = <&vcc_3v3>;
369 vqmmc-supply = <&vcc_1v8>;
386 pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
387 pinctrl-names = "default";
388 uart-has-rtscts;
391 compatible = "brcm,bcm43438-bt";
392 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
393 max-speed = <2000000>;
395 clock-names = "lpo";
401 pinctrl-0 = <&uart_ao_a_pins>;
402 pinctrl-names = "default";
405 &usb {