Lines Matching +full:vin2 +full:- +full:supply
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
4 /dts-v1/;
6 #include "sun50i-a64.dtsi"
7 #include "sun50i-a64-cpu-opp.dtsi"
9 #include <dt-bindings/gpio/gpio.h>
13 compatible = "jide,remix-mini-pc", "allwinner,sun50i-h64",
14 "allwinner,sun50i-a64";
22 stdout-path = "serial0:115200n8";
25 hdmi-connector {
26 compatible = "hdmi-connector";
31 remote-endpoint = <&hdmi_out_con>;
36 reg_vcc5v: regulator-5v {
37 /* board wide 5V supply directly from the DC input */
38 compatible = "regulator-fixed";
39 regulator-name = "vcc-5v";
40 regulator-min-microvolt = <5000000>;
41 regulator-max-microvolt = <5000000>;
42 regulator-always-on;
46 compatible = "mmc-pwrseq-simple";
47 reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
48 post-power-on-delay-ms = <200>;
57 cpvdd-supply = <®_eldo1>;
62 cpu-supply = <®_dcdc2>;
66 cpu-supply = <®_dcdc2>;
70 cpu-supply = <®_dcdc2>;
74 cpu-supply = <®_dcdc2>;
94 hvcc-supply = <®_dldo1>;
100 remote-endpoint = <&hdmi_con_in>;
106 pinctrl-names = "default";
107 pinctrl-0 = <&i2c0_pins>;
112 bias-pull-up;
116 pinctrl-names = "default";
117 pinctrl-0 = <&mmc0_pins>;
118 vmmc-supply = <®_dcdc1>;
119 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
120 disable-wp;
121 bus-width = <4>;
126 pinctrl-names = "default";
127 pinctrl-0 = <&mmc1_pins>;
128 vmmc-supply = <®_aldo1>;
129 vqmmc-supply = <®_dldo4>;
130 mmc-pwrseq = <&wifi_pwrseq>;
131 bus-width = <4>;
132 non-removable;
137 interrupt-parent = <&r_pio>;
139 interrupt-names = "host-wake";
144 pinctrl-names = "default";
145 pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
146 vmmc-supply = <®_dcdc1>;
147 vqmmc-supply = <®_eldo1>;
148 bus-width = <8>;
149 non-removable;
150 mmc-hs200-1_8v;
151 mmc-hs400-1_8v;
152 cap-mmc-hw-reset;
165 vcc-pb-supply = <®_dcdc1>;
166 vcc-pc-supply = <®_dcdc1>;
167 vcc-pd-supply = <®_dcdc1>;
168 vcc-pe-supply = <®_dcdc1>;
169 vcc-pf-supply = <®_dcdc1>;
170 vcc-pg-supply = <®_dldo4>;
171 vcc-ph-supply = <®_dcdc1>;
180 * We cannot add that supply for now since it would create a circular
183 * vcc-pl-supply = <®_aldo2>;
191 compatible = "x-powers,axp803";
193 interrupt-parent = <&r_intc>;
195 x-powers,drive-vbus-en;
197 vin1-supply = <®_vcc5v>;
198 vin2-supply = <®_vcc5v>;
199 vin3-supply = <®_vcc5v>;
200 vin5-supply = <®_vcc5v>;
201 vin6-supply = <®_vcc5v>;
202 aldoin-supply = <®_vcc5v>;
203 dldoin-supply = <®_vcc5v>;
204 eldoin-supply = <®_vcc5v>;
205 fldoin-supply = <®_vcc5v>;
206 drivevbus-supply = <®_vcc5v>;
207 ips-supply = <®_vcc5v>;
220 regulator-always-on;
221 regulator-min-microvolt = <3300000>;
222 regulator-max-microvolt = <3300000>;
223 regulator-name = "vcc-3v3";
227 regulator-always-on;
228 regulator-min-microvolt = <1040000>;
229 regulator-max-microvolt = <1300000>;
230 regulator-name = "vdd-cpux";
236 regulator-always-on;
237 regulator-min-microvolt = <1500000>;
238 regulator-max-microvolt = <1500000>;
239 regulator-name = "vcc-dram";
244 regulator-always-on;
245 regulator-min-microvolt = <1200000>;
246 regulator-max-microvolt = <1200000>;
247 regulator-name = "vdd-sys";
251 regulator-min-microvolt = <3300000>;
252 regulator-max-microvolt = <3300000>;
253 regulator-name = "vcc-wifi";
258 regulator-always-on;
259 regulator-min-microvolt = <3300000>;
260 regulator-max-microvolt = <3300000>;
261 regulator-name = "vcc-pl";
265 regulator-always-on;
266 regulator-min-microvolt = <3000000>;
267 regulator-max-microvolt = <3000000>;
268 regulator-name = "vcc-pll-avcc";
271 /* AC200 power supply */
273 regulator-always-on;
274 regulator-min-microvolt = <3300000>;
275 regulator-max-microvolt = <3300000>;
276 regulator-name = "vcc-ave-33";
280 regulator-min-microvolt = <3300000>;
281 regulator-max-microvolt = <3300000>;
282 regulator-name = "vcc-wifi-io";
286 regulator-name = "usb0-vbus";
291 regulator-always-on;
292 regulator-min-microvolt = <1800000>;
293 regulator-max-microvolt = <1800000>;
294 regulator-name = "vcc-cpvdd-dram-emmc";
297 /* Supplies the arisc management core, needed by TF-A to power off cores. */
299 regulator-always-on;
300 regulator-min-microvolt = <1100000>;
301 regulator-max-microvolt = <1100000>;
302 regulator-name = "vdd-cpus";
306 regulator-name = "vcc-rtc";
310 vcc-hdmi-supply = <®_dcdc1>;
314 simple-audio-card,aux-devs = <&codec_analog>;
315 simple-audio-card,widgets = "Microphone", "Microphone Jack",
317 simple-audio-card,routing =
329 pinctrl-names = "default";
330 pinctrl-0 = <&uart0_pb_pins>;
335 pinctrl-names = "default";
336 pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
337 uart-has-rtscts;
341 compatible = "realtek,rtl8723bs-bt";
342 enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
343 max-speed = <1500000>;
353 usb0_vbus-supply = <®_drivevbus>;
354 usb1_vbus-supply = <®_drivevbus>;